rockchip: rk3328: rock64 - fix gen3 SPL hang
[oweals/u-boot.git] / arch / arm / dts / tegra30-cardhu.dts
index 1b8ed737e049707f0cec91f491bdb2e84e3099f0..7534861e40d9f47203d3e669ddd5d58f7bc734a9 100644 (file)
@@ -16,8 +16,8 @@
                i2c2 = "/i2c@7000c400";
                i2c3 = "/i2c@7000c500";
                i2c4 = "/i2c@7000c700";
-               sdhci0 = "/sdhci@78000600";
-               sdhci1 = "/sdhci@78000000";
+               mmc0 = "/sdhci@78000600";
+               mmc1 = "/sdhci@78000000";
                spi0 = "/spi@7000da00";
                usb0 = "/usb@7d008000";
        };
                reg = <0x80000000 0x40000000>;
        };
 
+       pcie@3000 {
+               status = "okay";
+
+               /* AVDD_PEXA and VDD_PEXA inputs are grounded on Cardhu. */
+               avdd-pexb-supply = <&ldo1_reg>;
+               vdd-pexb-supply = <&ldo1_reg>;
+               avdd-pex-pll-supply = <&ldo1_reg>;
+               hvdd-pex-supply = <&pex_hvdd_3v3_reg>;
+               vddio-pex-ctl-supply = <&sys_3v3_reg>;
+               avdd-plle-supply = <&ldo2_reg>;
+
+               pci@1,0 {
+                       nvidia,num-lanes = <4>;
+               };
+
+               pci@2,0 {
+                       nvidia,num-lanes = <1>;
+               };
+
+               pci@3,0 {
+                       status = "okay";
+                       nvidia,num-lanes = <1>;
+               };
+       };
+
        i2c@7000c000 {
                status = "okay";
                clock-frequency = <100000>;
        i2c@7000d000 {
                status = "okay";
                clock-frequency = <100000>;
+
+               pmic: tps65911@2d {
+                       compatible = "ti,tps65911";
+                       reg = <0x2d>;
+
+                       interrupts = <GIC_SPI 86 IRQ_TYPE_LEVEL_HIGH>;
+                       #interrupt-cells = <2>;
+                       interrupt-controller;
+
+                       ti,system-power-controller;
+
+                       #gpio-cells = <2>;
+                       gpio-controller;
+
+                       vcc1-supply = <&vdd_ac_bat_reg>;
+                       vcc2-supply = <&vdd_ac_bat_reg>;
+                       vcc3-supply = <&vio_reg>;
+                       vcc4-supply = <&vdd_5v0_reg>;
+                       vcc5-supply = <&vdd_ac_bat_reg>;
+                       vcc6-supply = <&vdd2_reg>;
+                       vcc7-supply = <&vdd_ac_bat_reg>;
+                       vccio-supply = <&vdd_ac_bat_reg>;
+
+                       regulators {
+                               vdd1_reg: vdd1 {
+                                       regulator-name = "vddio_ddr_1v2";
+                                       regulator-min-microvolt = <1200000>;
+                                       regulator-max-microvolt = <1200000>;
+                                       regulator-always-on;
+                               };
+
+                               vdd2_reg: vdd2 {
+                                       regulator-name = "vdd_1v5_gen";
+                                       regulator-min-microvolt = <1500000>;
+                                       regulator-max-microvolt = <1500000>;
+                                       regulator-always-on;
+                               };
+
+                               vddctrl_reg: vddctrl {
+                                       regulator-name = "vdd_cpu,vdd_sys";
+                                       regulator-min-microvolt = <1000000>;
+                                       regulator-max-microvolt = <1000000>;
+                                       regulator-always-on;
+                               };
+
+                               vio_reg: vio {
+                                       regulator-name = "vdd_1v8_gen";
+                                       regulator-min-microvolt = <1800000>;
+                                       regulator-max-microvolt = <1800000>;
+                                       regulator-always-on;
+                               };
+
+                               ldo1_reg: ldo1 {
+                                       regulator-name = "vdd_pexa,vdd_pexb";
+                                       regulator-min-microvolt = <1050000>;
+                                       regulator-max-microvolt = <1050000>;
+                               };
+
+                               ldo2_reg: ldo2 {
+                                       regulator-name = "vdd_sata,avdd_plle";
+                                       regulator-min-microvolt = <1050000>;
+                                       regulator-max-microvolt = <1050000>;
+                               };
+
+                               /* LDO3 is not connected to anything */
+
+                               ldo4_reg: ldo4 {
+                                       regulator-name = "vdd_rtc";
+                                       regulator-min-microvolt = <1200000>;
+                                       regulator-max-microvolt = <1200000>;
+                                       regulator-always-on;
+                               };
+
+                               ldo5_reg: ldo5 {
+                                       regulator-name = "vddio_sdmmc,avdd_vdac";
+                                       regulator-min-microvolt = <3300000>;
+                                       regulator-max-microvolt = <3300000>;
+                                       regulator-always-on;
+                               };
+
+                               ldo6_reg: ldo6 {
+                                       regulator-name = "avdd_dsi_csi,pwrdet_mipi";
+                                       regulator-min-microvolt = <1200000>;
+                                       regulator-max-microvolt = <1200000>;
+                               };
+
+                               ldo7_reg: ldo7 {
+                                       regulator-name = "vdd_pllm,x,u,a_p_c_s";
+                                       regulator-min-microvolt = <1200000>;
+                                       regulator-max-microvolt = <1200000>;
+                                       regulator-always-on;
+                               };
+
+                               ldo8_reg: ldo8 {
+                                       regulator-name = "vdd_ddr_hs";
+                                       regulator-min-microvolt = <1000000>;
+                                       regulator-max-microvolt = <1000000>;
+                                       regulator-always-on;
+                               };
+                       };
+               };
        };
 
        spi@7000da00 {
 
        sdhci@78000000 {
                status = "okay";
-               cd-gpios = <&gpio 69 1>; /* gpio PI5 */
-               wp-gpios = <&gpio 155 0>; /* gpio PT3 */
-               power-gpios = <&gpio 31 0>; /* gpio PD7 */
+               cd-gpios = <&gpio TEGRA_GPIO(I, 5) GPIO_ACTIVE_LOW>;
+               wp-gpios = <&gpio TEGRA_GPIO(T, 3) GPIO_ACTIVE_HIGH>;
+               power-gpios = <&gpio TEGRA_GPIO(D, 7) GPIO_ACTIVE_HIGH>;
                bus-width = <4>;
        };
 
        sdhci@78000600 {
                status = "okay";
                bus-width = <8>;
+               non-removable;
        };
 
        usb@7d008000 {
-               nvidia,vbus-gpio = <&gpio 236 0>;       /* PDD4 */
+               nvidia,vbus-gpio = <&gpio TEGRA_GPIO(DD, 4) GPIO_ACTIVE_HIGH>;
                status = "okay";
        };
+
+       clocks {
+               compatible = "simple-bus";
+               #address-cells = <1>;
+               #size-cells = <0>;
+
+               clk32k_in: clock@0 {
+                       compatible = "fixed-clock";
+                       reg=<0>;
+                       #clock-cells = <0>;
+                       clock-frequency = <32768>;
+               };
+       };
+
+       regulators {
+               compatible = "simple-bus";
+               #address-cells = <1>;
+               #size-cells = <0>;
+
+               vdd_ac_bat_reg: regulator@0 {
+                       compatible = "regulator-fixed";
+                       reg = <0>;
+                       regulator-name = "vdd_ac_bat";
+                       regulator-min-microvolt = <5000000>;
+                       regulator-max-microvolt = <5000000>;
+                       regulator-always-on;
+               };
+
+               cam_1v8_reg: regulator@1 {
+                       compatible = "regulator-fixed";
+                       reg = <1>;
+                       regulator-name = "cam_1v8";
+                       regulator-min-microvolt = <1800000>;
+                       regulator-max-microvolt = <1800000>;
+                       enable-active-high;
+                       gpio = <&gpio TEGRA_GPIO(BB, 4) GPIO_ACTIVE_HIGH>;
+                       vin-supply = <&vio_reg>;
+               };
+
+               cp_5v_reg: regulator@2 {
+                       compatible = "regulator-fixed";
+                       reg = <2>;
+                       regulator-name = "cp_5v";
+                       regulator-min-microvolt = <5000000>;
+                       regulator-max-microvolt = <5000000>;
+                       regulator-boot-on;
+                       regulator-always-on;
+                       enable-active-high;
+                       gpio = <&pmic 0 GPIO_ACTIVE_HIGH>;
+               };
+
+               emmc_3v3_reg: regulator@3 {
+                       compatible = "regulator-fixed";
+                       reg = <3>;
+                       regulator-name = "emmc_3v3";
+                       regulator-min-microvolt = <3300000>;
+                       regulator-max-microvolt = <3300000>;
+                       regulator-always-on;
+                       regulator-boot-on;
+                       enable-active-high;
+                       gpio = <&gpio TEGRA_GPIO(D, 1) GPIO_ACTIVE_HIGH>;
+                       vin-supply = <&sys_3v3_reg>;
+               };
+
+               modem_3v3_reg: regulator@4 {
+                       compatible = "regulator-fixed";
+                       reg = <4>;
+                       regulator-name = "modem_3v3";
+                       regulator-min-microvolt = <3300000>;
+                       regulator-max-microvolt = <3300000>;
+                       enable-active-high;
+                       gpio = <&gpio TEGRA_GPIO(D, 6) GPIO_ACTIVE_HIGH>;
+               };
+
+               pex_hvdd_3v3_reg: regulator@5 {
+                       compatible = "regulator-fixed";
+                       reg = <5>;
+                       regulator-name = "pex_hvdd_3v3";
+                       regulator-min-microvolt = <3300000>;
+                       regulator-max-microvolt = <3300000>;
+                       enable-active-high;
+                       gpio = <&gpio TEGRA_GPIO(L, 7) GPIO_ACTIVE_HIGH>;
+                       vin-supply = <&sys_3v3_reg>;
+               };
+
+               vdd_cam1_ldo_reg: regulator@6 {
+                       compatible = "regulator-fixed";
+                       reg = <6>;
+                       regulator-name = "vdd_cam1_ldo";
+                       regulator-min-microvolt = <2800000>;
+                       regulator-max-microvolt = <2800000>;
+                       enable-active-high;
+                       gpio = <&gpio TEGRA_GPIO(R, 6) GPIO_ACTIVE_HIGH>;
+                       vin-supply = <&sys_3v3_reg>;
+               };
+
+               vdd_cam2_ldo_reg: regulator@7 {
+                       compatible = "regulator-fixed";
+                       reg = <7>;
+                       regulator-name = "vdd_cam2_ldo";
+                       regulator-min-microvolt = <2800000>;
+                       regulator-max-microvolt = <2800000>;
+                       enable-active-high;
+                       gpio = <&gpio TEGRA_GPIO(R, 7) GPIO_ACTIVE_HIGH>;
+                       vin-supply = <&sys_3v3_reg>;
+               };
+
+               vdd_cam3_ldo_reg: regulator@8 {
+                       compatible = "regulator-fixed";
+                       reg = <8>;
+                       regulator-name = "vdd_cam3_ldo";
+                       regulator-min-microvolt = <3300000>;
+                       regulator-max-microvolt = <3300000>;
+                       enable-active-high;
+                       gpio = <&gpio TEGRA_GPIO(S, 0) GPIO_ACTIVE_HIGH>;
+                       vin-supply = <&sys_3v3_reg>;
+               };
+
+               vdd_com_reg: regulator@9 {
+                       compatible = "regulator-fixed";
+                       reg = <9>;
+                       regulator-name = "vdd_com";
+                       regulator-min-microvolt = <3300000>;
+                       regulator-max-microvolt = <3300000>;
+                       regulator-always-on;
+                       regulator-boot-on;
+                       enable-active-high;
+                       gpio = <&gpio TEGRA_GPIO(D, 0) GPIO_ACTIVE_HIGH>;
+                       vin-supply = <&sys_3v3_reg>;
+               };
+
+               vdd_fuse_3v3_reg: regulator@10 {
+                       compatible = "regulator-fixed";
+                       reg = <10>;
+                       regulator-name = "vdd_fuse_3v3";
+                       regulator-min-microvolt = <3300000>;
+                       regulator-max-microvolt = <3300000>;
+                       enable-active-high;
+                       gpio = <&gpio TEGRA_GPIO(L, 6) GPIO_ACTIVE_HIGH>;
+                       vin-supply = <&sys_3v3_reg>;
+               };
+
+               vdd_pnl1_reg: regulator@11 {
+                       compatible = "regulator-fixed";
+                       reg = <11>;
+                       regulator-name = "vdd_pnl1";
+                       regulator-min-microvolt = <3300000>;
+                       regulator-max-microvolt = <3300000>;
+                       regulator-always-on;
+                       regulator-boot-on;
+                       enable-active-high;
+                       gpio = <&gpio TEGRA_GPIO(L, 4) GPIO_ACTIVE_HIGH>;
+                       vin-supply = <&sys_3v3_reg>;
+               };
+
+               vdd_vid_reg: regulator@12 {
+                       compatible = "regulator-fixed";
+                       reg = <12>;
+                       regulator-name = "vddio_vid";
+                       regulator-min-microvolt = <5000000>;
+                       regulator-max-microvolt = <5000000>;
+                       enable-active-high;
+                       gpio = <&gpio TEGRA_GPIO(T, 0) GPIO_ACTIVE_HIGH>;
+                       gpio-open-drain;
+                       vin-supply = <&vdd_5v0_reg>;
+               };
+
+               ddr_reg: regulator@100 {
+                       compatible = "regulator-fixed";
+                       regulator-name = "ddr";
+                       reg = <100>;
+                       regulator-min-microvolt = <1500000>;
+                       regulator-max-microvolt = <1500000>;
+                       regulator-always-on;
+                       regulator-boot-on;
+                       enable-active-high;
+                       gpio = <&pmic 7 GPIO_ACTIVE_HIGH>;
+               };
+
+               sys_3v3_reg: regulator@101 {
+                       compatible = "regulator-fixed";
+                       reg = <101>;
+                       regulator-name = "sys_3v3";
+                       regulator-min-microvolt = <3300000>;
+                       regulator-max-microvolt = <3300000>;
+                       regulator-always-on;
+                       regulator-boot-on;
+                       enable-active-high;
+                       gpio = <&pmic 6 GPIO_ACTIVE_HIGH>;
+               };
+
+               usb1_vbus_reg: regulator@102 {
+                       compatible = "regulator-fixed";
+                       reg = <102>;
+                       regulator-name = "usb1_vbus";
+                       regulator-min-microvolt = <5000000>;
+                       regulator-max-microvolt = <5000000>;
+                       enable-active-high;
+                       gpio = <&gpio TEGRA_GPIO(DD, 6) GPIO_ACTIVE_HIGH>;
+                       gpio-open-drain;
+                       vin-supply = <&vdd_5v0_reg>;
+               };
+
+               usb3_vbus_reg: regulator@103 {
+                       compatible = "regulator-fixed";
+                       reg = <103>;
+                       regulator-name = "usb3_vbus";
+                       regulator-min-microvolt = <5000000>;
+                       regulator-max-microvolt = <5000000>;
+                       enable-active-high;
+                       gpio = <&gpio TEGRA_GPIO(DD, 4) GPIO_ACTIVE_HIGH>;
+                       gpio-open-drain;
+                       vin-supply = <&vdd_5v0_reg>;
+               };
+
+               vdd_5v0_reg: regulator@104 {
+                       compatible = "regulator-fixed";
+                       reg = <104>;
+                       regulator-name = "5v0";
+                       regulator-min-microvolt = <5000000>;
+                       regulator-max-microvolt = <5000000>;
+                       enable-active-high;
+                       gpio = <&pmic 8 GPIO_ACTIVE_HIGH>;
+               };
+
+               vdd_bl_reg: regulator@105 {
+                       compatible = "regulator-fixed";
+                       reg = <105>;
+                       regulator-name = "vdd_bl";
+                       regulator-min-microvolt = <5000000>;
+                       regulator-max-microvolt = <5000000>;
+                       regulator-always-on;
+                       regulator-boot-on;
+                       enable-active-high;
+                       gpio = <&gpio TEGRA_GPIO(DD, 2) GPIO_ACTIVE_HIGH>;
+               };
+
+               vdd_bl2_reg: regulator@106 {
+                       compatible = "regulator-fixed";
+                       reg = <106>;
+                       regulator-name = "vdd_bl2";
+                       regulator-min-microvolt = <5000000>;
+                       regulator-max-microvolt = <5000000>;
+                       regulator-always-on;
+                       regulator-boot-on;
+                       enable-active-high;
+                       gpio = <&gpio TEGRA_GPIO(DD, 0) GPIO_ACTIVE_HIGH>;
+               };
+       };
+};
+
+&uarta {
+       status = "okay";
 };