ARM: dts: rmobile: Add rudimentary R8A7790 Stout DT

[oweals/u-boot.git] / arch / arm / dts / sun8i-h3-orangepi-plus.dts

diff --git a/arch/arm/dts/sun8i-h3-orangepi-plus.dts b/arch/arm/dts/sun8i-h3-orangepi-plus.dts
index 4f4bb0f3c0aefad4f180b2cbff1fb3b89d5cdcd0..e7079b26bc8a62db598abb6cbcfe66897c9b1146 100644 (file)
--- a/arch/arm/dts/sun8i-h3-orangepi-plus.dts
+++ b/arch/arm/dts/sun8i-h3-orangepi-plus.dts
@@ -44,21 +44,9 @@
 #include "sun8i-h3-orangepi-2.dts"
 
 / {
-       model = "Xunlong Orange Pi Plus / Plus 2 / Plus 2E";
+       model = "Xunlong Orange Pi Plus / Plus 2";
        compatible = "xunlong,orangepi-plus", "allwinner,sun8i-h3";
 
-       reg_usb3_vbus: usb3-vbus {
-               compatible = "regulator-fixed";
-               pinctrl-names = "default";
-               pinctrl-0 = <&usb3_vbus_pin_a>;
-               regulator-name = "usb3-vbus";
-               regulator-min-microvolt = <5000000>;
-               regulator-max-microvolt = <5000000>;
-               regulator-boot-on;
-               enable-active-high;
-               gpio = <&pio 6 11 GPIO_ACTIVE_HIGH>;
-       };
-
        reg_gmac_3v3: gmac-3v3 {
                compatible = "regulator-fixed";
                pinctrl-names = "default";
@@ -70,16 +58,33 @@
                enable-active-high;
                gpio = <&pio 3 6 GPIO_ACTIVE_HIGH>;
        };
-};
 
-&ehci2 {
-       status = "okay";
+       reg_usb3_vbus: usb3-vbus {
+               compatible = "regulator-fixed";
+               pinctrl-names = "default";
+               pinctrl-0 = <&usb3_vbus_pin_a>;
+               regulator-name = "usb3-vbus";
+               regulator-min-microvolt = <5000000>;
+               regulator-max-microvolt = <5000000>;
+               regulator-boot-on;
+               enable-active-high;
+               gpio = <&pio 6 11 GPIO_ACTIVE_HIGH>;
+       };
 };
 
 &ehci3 {
        status = "okay";
 };
 
+&emac {
+       /* The Orange Pi Plus uses an external phy */
+       pinctrl-names = "default";
+       pinctrl-0 = <&emac_rgmii_pins>;
+       phy-supply = <&reg_gmac_3v3>;
+       phy-mode = "rgmii";
+       /delete-property/allwinner,use-internal-phy;
+};
+
 &mmc2 {
        pinctrl-names = "default";
        pinctrl-0 = <&mmc2_8bit_pins>;
@@ -97,28 +102,16 @@
        allwinner,pull = <SUN4I_PINCTRL_PULL_UP>;
 };
 
-&ohci1 {
-       status = "okay";
-};
-
-&ohci2 {
-       status = "okay";
-};
-
-&ohci3 {
-       status = "okay";
-};
-
 &pio {
-       usb3_vbus_pin_a: usb3_vbus_pin@0 {
-               allwinner,pins = "PG11";
+       gmac_power_pin_orangepi: gmac_power_pin@0 {
+               allwinner,pins = "PD6";
                allwinner,function = "gpio_out";
                allwinner,drive = <SUN4I_PINCTRL_10_MA>;
                allwinner,pull = <SUN4I_PINCTRL_NO_PULL>;
        };
 
-       gmac_power_pin_orangepi: gmac_power_pin@0 {
-               allwinner,pins = "PD6";
+       usb3_vbus_pin_a: usb3_vbus_pin@0 {
+               allwinner,pins = "PG11";
                allwinner,function = "gpio_out";
                allwinner,drive = <SUN4I_PINCTRL_10_MA>;
                allwinner,pull = <SUN4I_PINCTRL_NO_PULL>;
@@ -128,18 +121,3 @@
 &usbphy {
        usb3_vbus-supply = <&reg_usb3_vbus>;
 };
-
-&emac {
-       pinctrl-names = "default";
-       pinctrl-0 = <&emac_rgmii_pins>;
-       phy-supply = <&reg_gmac_3v3>;
-       phy = <&phy1>;
-       phy-mode = "rgmii";
-
-       allwinner,leds-active-low;
-       status = "okay";
-
-       phy1: ethernet-phy@1 {
-               reg = <0>;
-       };
-};