Merge git://git.denx.de/u-boot-video

[oweals/u-boot.git] / arch / arm / dts / sun8i-h3-orangepi-plus.dts

diff --git a/arch/arm/dts/sun8i-h3-orangepi-plus.dts b/arch/arm/dts/sun8i-h3-orangepi-plus.dts
index 1cb6c6653d83b05c5145ed6f041a4cf58f8ad627..e7079b26bc8a62db598abb6cbcfe66897c9b1146 100644 (file)
--- a/arch/arm/dts/sun8i-h3-orangepi-plus.dts
+++ b/arch/arm/dts/sun8i-h3-orangepi-plus.dts
@@ -40,23 +40,23 @@
  *     OTHER DEALINGS IN THE SOFTWARE.
  */
 
-/dts-v1/;
-#include "sun8i-h3.dtsi"
-#include "sunxi-common-regulators.dtsi"
-
-#include <dt-bindings/gpio/gpio.h>
-#include <dt-bindings/pinctrl/sun4i-a10.h>
+/* The Orange Pi Plus is an extended version of the Orange Pi 2 */
+#include "sun8i-h3-orangepi-2.dts"
 
 / {
-       model = "Xunlong Orange Pi Plus";
+       model = "Xunlong Orange Pi Plus / Plus 2";
        compatible = "xunlong,orangepi-plus", "allwinner,sun8i-h3";
 
-       aliases {
-               serial0 = &uart0;
-       };
-
-       chosen {
-               stdout-path = "serial0:115200n8";
+       reg_gmac_3v3: gmac-3v3 {
+               compatible = "regulator-fixed";
+               pinctrl-names = "default";
+               pinctrl-0 = <&gmac_power_pin_orangepi>;
+               regulator-name = "gmac-3v3";
+               regulator-min-microvolt = <3300000>;
+               regulator-max-microvolt = <3300000>;
+               startup-delay-us = <100000>;
+               enable-active-high;
+               gpio = <&pio 3 6 GPIO_ACTIVE_HIGH>;
        };
 
        reg_usb3_vbus: usb3-vbus {
@@ -72,50 +72,52 @@
        };
 };
 
-&ehci1 {
-       status = "okay";
-};
-
 &ehci3 {
        status = "okay";
 };
 
-&pio {
-       usb3_vbus_pin_a: usb3_vbus_pin@0 {
-               allwinner,pins = "PG11";
-               allwinner,function = "gpio_out";
-               allwinner,drive = <SUN4I_PINCTRL_10_MA>;
-               allwinner,pull = <SUN4I_PINCTRL_NO_PULL>;
-       };
+&emac {
+       /* The Orange Pi Plus uses an external phy */
+       pinctrl-names = "default";
+       pinctrl-0 = <&emac_rgmii_pins>;
+       phy-supply = <&reg_gmac_3v3>;
+       phy-mode = "rgmii";
+       /delete-property/allwinner,use-internal-phy;
 };
 
-&mmc0 {
+&mmc2 {
        pinctrl-names = "default";
-       pinctrl-0 = <&mmc0_pins_a>, <&mmc0_cd_pin>;
+       pinctrl-0 = <&mmc2_8bit_pins>;
        vmmc-supply = <&reg_vcc3v3>;
-       bus-width = <4>;
-       cd-gpios = <&pio 5 6 GPIO_ACTIVE_HIGH>; /* PF6 */
-       cd-inverted;
+       bus-width = <8>;
+       non-removable;
+       cap-mmc-hw-reset;
        status = "okay";
 };
 
-&reg_usb1_vbus {
-       gpio = <&pio 6 13 GPIO_ACTIVE_HIGH>;
-       status = "okay";
+&mmc2_8bit_pins {
+       /* Increase drive strength for DDR modes */
+       allwinner,drive = <SUN4I_PINCTRL_40_MA>;
+       /* eMMC is missing pull-ups */
+       allwinner,pull = <SUN4I_PINCTRL_PULL_UP>;
 };
 
-&uart0 {
-       pinctrl-names = "default";
-       pinctrl-0 = <&uart0_pins_a>;
-       status = "okay";
-};
+&pio {
+       gmac_power_pin_orangepi: gmac_power_pin@0 {
+               allwinner,pins = "PD6";
+               allwinner,function = "gpio_out";
+               allwinner,drive = <SUN4I_PINCTRL_10_MA>;
+               allwinner,pull = <SUN4I_PINCTRL_NO_PULL>;
+       };
 
-&usb1_vbus_pin_a {
-       allwinner,pins = "PG13";
+       usb3_vbus_pin_a: usb3_vbus_pin@0 {
+               allwinner,pins = "PG11";
+               allwinner,function = "gpio_out";
+               allwinner,drive = <SUN4I_PINCTRL_10_MA>;
+               allwinner,pull = <SUN4I_PINCTRL_NO_PULL>;
+       };
 };
 
 &usbphy {
-       usb1_vbus-supply = <&reg_usb1_vbus>;
        usb3_vbus-supply = <&reg_usb3_vbus>;
-       status = "okay";
 };