Merge https://gitlab.denx.de/u-boot/custodians/u-boot-clk

[oweals/u-boot.git] / arch / arm / dts / sun8i-a83t-allwinner-h8homlet-v2.dts

diff --git a/arch/arm/dts/sun8i-a83t-allwinner-h8homlet-v2.dts b/arch/arm/dts/sun8i-a83t-allwinner-h8homlet-v2.dts
index 342e1d33fa1c37df6e473e63dc45732d51689883..36ecebaff3c0427610526ebf8441b933cd470b4e 100644 (file)
--- a/arch/arm/dts/sun8i-a83t-allwinner-h8homlet-v2.dts
+++ b/arch/arm/dts/sun8i-a83t-allwinner-h8homlet-v2.dts
@@ -44,6 +44,8 @@
 /dts-v1/;
 #include "sun8i-a83t.dtsi"
 
+#include <dt-bindings/gpio/gpio.h>
+
 / {
        model = "Allwinner A83T H8Homlet Proto Dev Board v2.0";
        compatible = "allwinner,h8homlet-v2", "allwinner,sun8i-a83t";
@@ -55,10 +57,213 @@
        chosen {
                stdout-path = "serial0:115200n8";
        };
+
+       reg_usb0_vbus: reg-usb0-vbus {
+               compatible = "regulator-fixed";
+               regulator-name = "usb0-vbus";
+               regulator-min-microvolt = <5000000>;
+               regulator-max-microvolt = <5000000>;
+               regulator-boot-on;
+               enable-active-high;
+               gpio = <&r_pio 0 5 GPIO_ACTIVE_HIGH>; /* PL5 */
+       };
+
+       reg_usb1_vbus: reg-usb1-vbus {
+               compatible = "regulator-fixed";
+               regulator-name = "usb1-vbus";
+               regulator-min-microvolt = <5000000>;
+               regulator-max-microvolt = <5000000>;
+               regulator-boot-on;
+               enable-active-high;
+               gpio = <&r_pio 0 6 GPIO_ACTIVE_HIGH>; /* PL6 */
+       };
+};
+
+&ehci0 {
+       status = "okay";
+};
+
+&mmc0 {
+       pinctrl-names = "default";
+       pinctrl-0 = <&mmc0_pins>;
+       vmmc-supply = <&reg_dcdc1>;
+       cd-gpios = <&pio 5 6 GPIO_ACTIVE_LOW>; /* PF6 */
+       bus-width = <4>;
+       status = "okay";
+};
+
+&mmc2 {
+       pinctrl-names = "default";
+       pinctrl-0 = <&mmc2_8bit_emmc_pins>;
+       vmmc-supply = <&reg_dcdc1>;
+       vqmmc-supply = <&reg_dcdc1>;
+       bus-width = <8>;
+       non-removable;
+       cap-mmc-hw-reset;
+       status = "okay";
+};
+
+&ohci0 {
+       status = "okay";
+};
+
+&r_rsb {
+       status = "okay";
+
+       axp81x: pmic@3a3 {
+               compatible = "x-powers,axp818", "x-powers,axp813";
+               reg = <0x3a3>;
+               interrupt-parent = <&r_intc>;
+               interrupts = <0 IRQ_TYPE_LEVEL_LOW>;
+               eldoin-supply = <&reg_dcdc1>;
+               swin-supply = <&reg_dcdc1>;
+       };
+
+       ac100: codec@e89 {
+               compatible = "x-powers,ac100";
+               reg = <0xe89>;
+
+               ac100_codec: codec {
+                       compatible = "x-powers,ac100-codec";
+                       interrupt-parent = <&r_pio>;
+                       interrupts = <0 11 IRQ_TYPE_LEVEL_LOW>; /* PL11 */
+                       #clock-cells = <0>;
+                       clock-output-names = "4M_adda";
+               };
+
+               ac100_rtc: rtc {
+                       compatible = "x-powers,ac100-rtc";
+                       interrupt-parent = <&r_intc>;
+                       interrupts = <0 IRQ_TYPE_LEVEL_LOW>;
+                       clocks = <&ac100_codec>;
+                       #clock-cells = <1>;
+                       clock-output-names = "cko1_rtc",
+                                            "cko2_rtc",
+                                            "cko3_rtc";
+               };
+       };
+};
+
+#include "axp81x.dtsi"
+
+&reg_aldo1 {
+       regulator-always-on;
+       regulator-min-microvolt = <1800000>;
+       regulator-max-microvolt = <1800000>;
+       regulator-name = "vcc-1v8";
+};
+
+&reg_aldo2 {
+       regulator-always-on;
+       regulator-min-microvolt = <1800000>;
+       regulator-max-microvolt = <1800000>;
+       regulator-name = "dram-pll";
+};
+
+&reg_aldo3 {
+       regulator-always-on;
+       regulator-min-microvolt = <3000000>;
+       regulator-max-microvolt = <3000000>;
+       regulator-name = "avcc";
+};
+
+&reg_dcdc1 {
+       regulator-always-on;
+       regulator-min-microvolt = <3300000>;
+       regulator-max-microvolt = <3300000>;
+       regulator-name = "vcc-3v3";
+};
+
+&reg_dcdc2 {
+       regulator-always-on;
+       regulator-min-microvolt = <700000>;
+       regulator-max-microvolt = <1100000>;
+       regulator-name = "vdd-cpua";
+};
+
+&reg_dcdc3 {
+       regulator-always-on;
+       regulator-min-microvolt = <700000>;
+       regulator-max-microvolt = <1100000>;
+       regulator-name = "vdd-cpub";
+};
+
+&reg_dcdc4 {
+       regulator-min-microvolt = <700000>;
+       regulator-max-microvolt = <1100000>;
+       regulator-name = "vdd-gpu";
+};
+
+&reg_dcdc5 {
+       regulator-always-on;
+       regulator-min-microvolt = <1500000>;
+       regulator-max-microvolt = <1500000>;
+       regulator-name = "vcc-dram";
+};
+
+&reg_dcdc6 {
+       regulator-always-on;
+       regulator-min-microvolt = <900000>;
+       regulator-max-microvolt = <900000>;
+       regulator-name = "vdd-sys";
+};
+
+&reg_dldo2 {
+       regulator-min-microvolt = <3300000>;
+       regulator-max-microvolt = <3300000>;
+       regulator-name = "vcc-mipi";
+};
+
+&reg_dldo4 {
+       /*
+        * The PHY requires 20ms after all voltages are applied until core
+        * logic is ready and 30ms after the reset pin is de-asserted.
+        * Set a 100ms delay to account for PMIC ramp time and board traces.
+        */
+       regulator-enable-ramp-delay = <100000>;
+       regulator-min-microvolt = <3300000>;
+       regulator-max-microvolt = <3300000>;
+       regulator-name = "vcc-ephy";
+};
+
+&reg_fldo1 {
+       regulator-min-microvolt = <1080000>;
+       regulator-max-microvolt = <1320000>;
+       regulator-name = "vdd12-hsic";
+};
+
+&reg_fldo2 {
+       /*
+        * Despite the embedded CPUs core not being used in any way,
+        * this must remain on or the system will hang.
+        */
+       regulator-always-on;
+       regulator-min-microvolt = <700000>;
+       regulator-max-microvolt = <1100000>;
+       regulator-name = "vdd-cpus";
+};
+
+&reg_rtc_ldo {
+       regulator-name = "vcc-rtc";
+};
+
+&reg_sw {
+       regulator-name = "vcc-wifi";
 };
 
 &uart0 {
        pinctrl-names = "default";
-       pinctrl-0 = <&uart0_pins_b>;
+       pinctrl-0 = <&uart0_pb_pins>;
+       status = "okay";
+};
+
+&usbphy {
+       usb0_vbus-supply = <&reg_usb0_vbus>;
+       usb1_vbus-supply = <&reg_usb1_vbus>;
+       status = "okay";
+};
+
+&usb_otg {
+       dr_mode = "host";
        status = "okay";
 };