ARM: dts: sama5d2: Add uart4 definition

[oweals/u-boot.git] / arch / arm / dts / sun8i-a33-sinlinx-sina33.dts

diff --git a/arch/arm/dts/sun8i-a33-sinlinx-sina33.dts b/arch/arm/dts/sun8i-a33-sinlinx-sina33.dts
index b1bc88c46c672b757f59f827f1b6aac4ceb91ca4..541acb4d2b91069da9f16a8ad8a75be91df8f162 100644 (file)
--- a/arch/arm/dts/sun8i-a33-sinlinx-sina33.dts
+++ b/arch/arm/dts/sun8i-a33-sinlinx-sina33.dts
@@ -48,7 +48,6 @@
 
 #include <dt-bindings/gpio/gpio.h>
 #include <dt-bindings/input/input.h>
-#include <dt-bindings/pinctrl/sun4i-a10.h>
 
 / {
        model = "Sinlinx SinA33";
@@ -80,7 +79,7 @@
        };
 };
 
-&de {
+&codec {
        status = "okay";
 };
 
@@ -88,6 +87,28 @@
        cpu-supply = <&reg_dcdc3>;
 };
 
+&cpu0_opp_table {
+       opp-1104000000 {
+               opp-hz = /bits/ 64 <1104000000>;
+               opp-microvolt = <1320000>;
+               clock-latency-ns = <244144>; /* 8 32k periods */
+       };
+
+       opp-1200000000 {
+               opp-hz = /bits/ 64 <1200000000>;
+               opp-microvolt = <1320000>;
+               clock-latency-ns = <244144>; /* 8 32k periods */
+       };
+};
+
+&de {
+       status = "okay";
+};
+
+&dai {
+       status = "okay";
+};
+
 &ehci0 {
        status = "okay";
 };
@@ -123,8 +144,7 @@
        pinctrl-0 = <&mmc0_pins_a>, <&mmc0_cd_pin_sina33>;
        vmmc-supply = <&reg_dcdc1>;
        bus-width = <4>;
-       cd-gpios = <&pio 1 4 GPIO_ACTIVE_HIGH>; /* PB4 */
-       cd-inverted;
+       cd-gpios = <&pio 1 4 GPIO_ACTIVE_LOW>; /* PB4 */
        status = "okay";
 };
 
@@ -140,9 +160,9 @@
 
 &mmc2_8bit_pins {
        /* Increase drive strength for DDR modes */
-       allwinner,drive = <SUN4I_PINCTRL_40_MA>;
+       drive-strength = <40>;
        /* eMMC is missing pull-ups */
-       allwinner,pull = <SUN4I_PINCTRL_PULL_UP>;
+       bias-pull-up;
 };
 
 &ohci0 {
@@ -151,10 +171,9 @@
 
 &pio {
        mmc0_cd_pin_sina33: mmc0_cd_pin@0 {
-               allwinner,pins = "PB4";
-               allwinner,function = "gpio_in";
-               allwinner,drive = <SUN4I_PINCTRL_10_MA>;
-               allwinner,pull = <SUN4I_PINCTRL_PULL_UP>;
+               pins = "PB4";
+               function = "gpio_in";
+               bias-pull-up;
        };
 };
 
@@ -170,7 +189,15 @@
        };
 };
 
-#include "axp22x.dtsi"
+#include "axp223.dtsi"
+
+&ac_power_supply {
+       status = "okay";
+};
+
+&battery_power_supply {
+       status = "okay";
+};
 
 &reg_aldo1 {
        regulator-always-on;
@@ -232,6 +259,10 @@
        regulator-name = "vcc-rtc";
 };
 
+&sound {
+       status = "okay";
+};
+
 &tcon0 {
        pinctrl-names = "default";
        pinctrl-0 = <&lcd_rgb666_pins>;