Merge branch 'master' of git://git.denx.de/u-boot

[oweals/u-boot.git] / arch / arm / dts / sun7i-a20-wits-pro-a20-dkt.dts

diff --git a/arch/arm/dts/sun7i-a20-wits-pro-a20-dkt.dts b/arch/arm/dts/sun7i-a20-wits-pro-a20-dkt.dts
index ff5c1086585ca4baa2daebad1c4bdbcbc679b694..c27e56091fb19cb471b54b735cc2ffa106bcfcdc 100644 (file)
--- a/arch/arm/dts/sun7i-a20-wits-pro-a20-dkt.dts
+++ b/arch/arm/dts/sun7i-a20-wits-pro-a20-dkt.dts
@@ -62,8 +62,6 @@
 
        mmc3_pwrseq: mmc3_pwrseq {
                compatible = "mmc-pwrseq-simple";
-               pinctrl-names = "default";
-               pinctrl-0 = <&vmmc3_pin_ap6xxx_wl_regon>;
                reset-gpios = <&pio 7 9 GPIO_ACTIVE_LOW>; /* PH9 WIFI_EN */
        };
 };
@@ -82,7 +80,7 @@
 
 &gmac {
        pinctrl-names = "default";
-       pinctrl-0 = <&gmac_pins_rgmii_a>;
+       pinctrl-0 = <&gmac_rgmii_pins>;
        phy = <&phy1>;
        phy-mode = "rgmii";
        status = "okay";
@@ -93,8 +91,6 @@
 };
 
 &i2c0 {
-       pinctrl-names = "default";
-       pinctrl-0 = <&i2c0_pins_a>;
        status = "okay";
 
        axp209: pmic@34 {
@@ -105,22 +101,16 @@
 };
 
 &i2c1 {
-       pinctrl-names = "default";
-       pinctrl-0 = <&i2c1_pins_a>;
        status = "okay";
 };
 
 &i2c2 {
-       pinctrl-names = "default";
-       pinctrl-0 = <&i2c2_pins_a>;
        status = "okay";
 };
 
 #include "axp209.dtsi"
 
 &mmc0 {
-       pinctrl-names = "default";
-       pinctrl-0 = <&mmc0_pins_a>;
        vmmc-supply = <&reg_vcc3v3>;
        bus-width = <4>;
        cd-gpios = <&pio 7 1 GPIO_ACTIVE_LOW>; /* PH1 */
@@ -128,8 +118,6 @@
 };
 
 &mmc3 {
-       pinctrl-names = "default";
-       pinctrl-0 = <&mmc3_pins_a>;
        vmmc-supply = <&reg_vcc3v3>;
        mmc-pwrseq = <&mmc3_pwrseq>;
        bus-width = <4>;
@@ -158,12 +146,7 @@
 };
 
 &pio {
-       vmmc3_pin_ap6xxx_wl_regon: vmmc3_pin@0 {
-               pins = "PH9";
-               function = "gpio_out";
-       };
-
-       usb0_id_detect_pin: usb0_id_detect_pin@0 {
+       usb0_id_detect_pin: usb0-id-detect-pin {
                pins = "PH4";
                function = "gpio_in";
                bias-pull-up;
@@ -209,7 +192,7 @@
 
 &uart0 {
        pinctrl-names = "default";
-       pinctrl-0 = <&uart0_pins_a>;
+       pinctrl-0 = <&uart0_pb_pins>;
        status = "okay";
 };