Merge tag 'efi-2020-07-rc2-2' of https://gitlab.denx.de/u-boot/custodians/u-boot-efi

[oweals/u-boot.git] / arch / arm / dts / sun7i-a20-orangepi.dts

diff --git a/arch/arm/dts/sun7i-a20-orangepi.dts b/arch/arm/dts/sun7i-a20-orangepi.dts
index 71125bf6457513db6b2b606cc856572035d3f091..d64de2e73a9f5cfcf0126b973660cb82e8f51c59 100644 (file)
--- a/arch/arm/dts/sun7i-a20-orangepi.dts
+++ b/arch/arm/dts/sun7i-a20-orangepi.dts
@@ -48,7 +48,6 @@
 
 #include <dt-bindings/gpio/gpio.h>
 #include <dt-bindings/interrupt-controller/irq.h>
-#include <dt-bindings/pinctrl/sun4i-a10.h>
 
 / {
        model = "Orange Pi";
@@ -64,8 +63,6 @@
 
        leds {
                compatible = "gpio-leds";
-               pinctrl-names = "default";
-               pinctrl-0 = <&led_pins_orangepi>;
 
                green {
                        label = "orangepi:green:usr";
@@ -75,8 +72,6 @@
 
        reg_gmac_3v3: gmac-3v3 {
                compatible = "regulator-fixed";
-               pinctrl-names = "default";
-               pinctrl-0 = <&gmac_power_pin_orangepi>;
                regulator-name = "gmac-3v3";
                regulator-min-microvolt = <3300000>;
                regulator-max-microvolt = <3300000>;
@@ -100,7 +95,7 @@
 
 &gmac {
        pinctrl-names = "default";
-       pinctrl-0 = <&gmac_pins_rgmii_a>;
+       pinctrl-0 = <&gmac_rgmii_pins>;
        phy = <&phy1>;
        phy-mode = "rgmii";
        phy-supply = <&reg_gmac_3v3>;
@@ -112,8 +107,6 @@
 };
 
 &i2c0 {
-       pinctrl-names = "default";
-       pinctrl-0 = <&i2c0_pins_a>;
        status = "okay";
 
        axp209: pmic@34 {
@@ -127,17 +120,14 @@
 
 &ir0 {
        pinctrl-names = "default";
-       pinctrl-0 = <&ir0_rx_pins_a>;
+       pinctrl-0 = <&ir0_rx_pin>;
        status = "okay";
 };
 
 &mmc0 {
-       pinctrl-names = "default";
-       pinctrl-0 = <&mmc0_pins_a>, <&mmc0_cd_pin_orangepi>;
        vmmc-supply = <&reg_vcc3v3>;
        bus-width = <4>;
-       cd-gpios = <&pio 7 10 GPIO_ACTIVE_HIGH>; /* PH10 */
-       cd-inverted;
+       cd-gpios = <&pio 7 10 GPIO_ACTIVE_LOW>; /* PH10 */
        status = "okay";
 };
 
@@ -146,46 +136,10 @@
 };
 
 &pio {
-       usb0_id_detect_pin: usb0_id_detect_pin@0 {
-               allwinner,pins = "PH4";
-               allwinner,function = "gpio_in";
-               allwinner,drive = <SUN4I_PINCTRL_10_MA>;
-               allwinner,pull = <SUN4I_PINCTRL_PULL_UP>;
-       };
-
-       mmc0_cd_pin_orangepi: mmc0_cd_pin@0 {
-               allwinner,pins = "PH10";
-               allwinner,function = "gpio_in";
-               allwinner,drive = <SUN4I_PINCTRL_10_MA>;
-               allwinner,pull = <SUN4I_PINCTRL_PULL_UP>;
-       };
-
-       usb2_vbus_pin_bananapro: usb2_vbus_pin@0 {
-               allwinner,pins = "PH22";
-               allwinner,function = "gpio_out";
-               allwinner,drive = <SUN4I_PINCTRL_10_MA>;
-               allwinner,pull = <SUN4I_PINCTRL_NO_PULL>;
-       };
-
-       gmac_power_pin_orangepi: gmac_power_pin@0 {
-               allwinner,pins = "PH23";
-               allwinner,function = "gpio_out";
-               allwinner,drive = <SUN4I_PINCTRL_10_MA>;
-               allwinner,pull = <SUN4I_PINCTRL_NO_PULL>;
-       };
-
-       led_pins_orangepi: led_pins@0 {
-               allwinner,pins = "PH24";
-               allwinner,function = "gpio_out";
-               allwinner,drive = <SUN4I_PINCTRL_10_MA>;
-               allwinner,pull = <SUN4I_PINCTRL_NO_PULL>;
-       };
-
-       usb1_vbus_pin_bananapro: usb1_vbus_pin@0 {
-               allwinner,pins = "PH26";
-               allwinner,function = "gpio_out";
-               allwinner,drive = <SUN4I_PINCTRL_10_MA>;
-               allwinner,pull = <SUN4I_PINCTRL_NO_PULL>;
+       usb0_id_detect_pin: usb0-id-detect-pin {
+               pins = "PH4";
+               function = "gpio_in";
+               bias-pull-up;
        };
 };
 
@@ -219,20 +173,18 @@
 };
 
 &reg_usb1_vbus {
-       pinctrl-0 = <&usb1_vbus_pin_bananapro>;
        gpio = <&pio 7 26 GPIO_ACTIVE_HIGH>; /* PH26 */
        status = "okay";
 };
 
 &reg_usb2_vbus {
-       pinctrl-0 = <&usb2_vbus_pin_bananapro>;
        gpio = <&pio 7 22 GPIO_ACTIVE_HIGH>; /* PH22 */
        status = "okay";
 };
 
 &uart0 {
        pinctrl-names = "default";
-       pinctrl-0 = <&uart0_pins_a>;
+       pinctrl-0 = <&uart0_pb_pins>;
        status = "okay";
 };