ARM: dts: rmobile: Add soc label to Gen3

[oweals/u-boot.git] / arch / arm / dts / sun7i-a20-orangepi-mini.dts

diff --git a/arch/arm/dts/sun7i-a20-orangepi-mini.dts b/arch/arm/dts/sun7i-a20-orangepi-mini.dts
index 0556938a5d4d63b2b5686f798e7f4ae53c2e1577..f5c7178eb0635a49c84f6b459608c53db634d1ef 100644 (file)
--- a/arch/arm/dts/sun7i-a20-orangepi-mini.dts
+++ b/arch/arm/dts/sun7i-a20-orangepi-mini.dts
@@ -18,11 +18,6 @@
  *     MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
  *     GNU General Public License for more details.
  *
- *     You should have received a copy of the GNU General Public
- *     License along with this file; if not, write to the Free
- *     Software Foundation, Inc., 51 Franklin St, Fifth Floor, Boston,
- *     MA 02110-1301 USA
- *
  * Or, alternatively,
  *
  *  b) Permission is hereby granted, free of charge, to any person
@@ -53,7 +48,6 @@
 
 #include <dt-bindings/gpio/gpio.h>
 #include <dt-bindings/interrupt-controller/irq.h>
-#include <dt-bindings/pinctrl/sun4i-a10.h>
 
 / {
        model = "Orange Pi Mini";
@@ -67,6 +61,17 @@
                stdout-path = "serial0:115200n8";
        };
 
+       hdmi-connector {
+               compatible = "hdmi-connector";
+               type = "a";
+
+               port {
+                       hdmi_con_in: endpoint {
+                               remote-endpoint = <&hdmi_out_con>;
+                       };
+               };
+       };
+
        leds {
                compatible = "gpio-leds";
                pinctrl-names = "default";
@@ -100,6 +105,14 @@
        status = "okay";
 };
 
+&codec {
+       status = "okay";
+};
+
+&de {
+       status = "okay";
+};
+
 &ehci0 {
        status = "okay";
 };
@@ -121,6 +134,16 @@
        };
 };
 
+&hdmi {
+       status = "okay";
+};
+
+&hdmi_out {
+       hdmi_out_con: endpoint {
+               remote-endpoint = <&hdmi_con_in>;
+       };
+};
+
 &i2c0 {
        pinctrl-names = "default";
        pinctrl-0 = <&i2c0_pins_a>;
@@ -137,7 +160,7 @@
 
 &ir0 {
        pinctrl-names = "default";
-       pinctrl-0 = <&ir0_pins_a>;
+       pinctrl-0 = <&ir0_rx_pins_a>;
        status = "okay";
 };
 
@@ -146,8 +169,7 @@
        pinctrl-0 = <&mmc0_pins_a>, <&mmc0_cd_pin_orangepi>;
        vmmc-supply = <&reg_vcc3v3>;
        bus-width = <4>;
-       cd-gpios = <&pio 7 10 GPIO_ACTIVE_HIGH>; /* PH10 */
-       cd-inverted;
+       cd-gpios = <&pio 7 10 GPIO_ACTIVE_LOW>; /* PH10 */
        status = "okay";
 };
 
@@ -156,52 +178,51 @@
        pinctrl-0 = <&mmc3_pins_a>, <&mmc3_cd_pin_orangepi>;
        vmmc-supply = <&reg_vcc3v3>;
        bus-width = <4>;
-       cd-gpios = <&pio 7 11 GPIO_ACTIVE_HIGH>; /* PH11 */
-       cd-inverted;
+       cd-gpios = <&pio 7 11 GPIO_ACTIVE_LOW>; /* PH11 */
+       status = "okay";
+};
+
+&otg_sram {
        status = "okay";
 };
 
 &pio {
+       usb0_id_detect_pin: usb0_id_detect_pin@0 {
+               pins = "PH4";
+               function = "gpio_in";
+               bias-pull-up;
+       };
+
        mmc0_cd_pin_orangepi: mmc0_cd_pin@0 {
-               allwinner,pins = "PH10";
-               allwinner,function = "gpio_in";
-               allwinner,drive = <SUN4I_PINCTRL_10_MA>;
-               allwinner,pull = <SUN4I_PINCTRL_PULL_UP>;
+               pins = "PH10";
+               function = "gpio_in";
+               bias-pull-up;
        };
 
        mmc3_cd_pin_orangepi: mmc3_cd_pin@0 {
-               allwinner,pins = "PH11";
-               allwinner,function = "gpio_in";
-               allwinner,drive = <SUN4I_PINCTRL_10_MA>;
-               allwinner,pull = <SUN4I_PINCTRL_PULL_UP>;
+               pins = "PH11";
+               function = "gpio_in";
+               bias-pull-up;
        };
 
        usb2_vbus_pin_bananapro: usb2_vbus_pin@0 {
-               allwinner,pins = "PH22";
-               allwinner,function = "gpio_out";
-               allwinner,drive = <SUN4I_PINCTRL_10_MA>;
-               allwinner,pull = <SUN4I_PINCTRL_NO_PULL>;
+               pins = "PH22";
+               function = "gpio_out";
        };
 
        gmac_power_pin_orangepi: gmac_power_pin@0 {
-               allwinner,pins = "PH23";
-               allwinner,function = "gpio_out";
-               allwinner,drive = <SUN4I_PINCTRL_10_MA>;
-               allwinner,pull = <SUN4I_PINCTRL_NO_PULL>;
+               pins = "PH23";
+               function = "gpio_out";
        };
 
        led_pins_orangepi: led_pins@0 {
-               allwinner,pins = "PH24", "PH25";
-               allwinner,function = "gpio_out";
-               allwinner,drive = <SUN4I_PINCTRL_10_MA>;
-               allwinner,pull = <SUN4I_PINCTRL_NO_PULL>;
+               pins = "PH24", "PH25";
+               function = "gpio_out";
        };
 
        usb1_vbus_pin_bananapro: usb1_vbus_pin@0 {
-               allwinner,pins = "PH26";
-               allwinner,function = "gpio_out";
-               allwinner,drive = <SUN4I_PINCTRL_10_MA>;
-               allwinner,pull = <SUN4I_PINCTRL_NO_PULL>;
+               pins = "PH26";
+               function = "gpio_out";
        };
 };
 
@@ -230,6 +251,10 @@
        regulator-name = "avcc";
 };
 
+&reg_usb0_vbus {
+       status = "okay";
+};
+
 &reg_usb1_vbus {
        pinctrl-0 = <&usb1_vbus_pin_bananapro>;
        gpio = <&pio 7 26 GPIO_ACTIVE_HIGH>; /* PH26 */
@@ -248,7 +273,21 @@
        status = "okay";
 };
 
+&usb_otg {
+       dr_mode = "otg";
+       status = "okay";
+};
+
+&usb_power_supply {
+       status = "okay";
+};
+
 &usbphy {
+       pinctrl-names = "default";
+       pinctrl-0 = <&usb0_id_detect_pin>;
+       usb0_id_det-gpio = <&pio 7 4 GPIO_ACTIVE_HIGH>; /* PH4 */
+       usb0_vbus_power-supply = <&usb_power_supply>;
+       usb0_vbus-supply = <&reg_usb0_vbus>;
        usb1_vbus-supply = <&reg_usb1_vbus>;
        usb2_vbus-supply = <&reg_usb2_vbus>;
        status = "okay";