Merge tag 'u-boot-imx-20191105' of https://gitlab.denx.de/u-boot/custodians/u-boot-imx

[oweals/u-boot.git] / arch / arm / dts / sun7i-a20-olinuxino-lime.dts

diff --git a/arch/arm/dts/sun7i-a20-olinuxino-lime.dts b/arch/arm/dts/sun7i-a20-olinuxino-lime.dts
index d20fd03596e9389e948eddb291d141de40d5f522..5e411194bf62bbd876176c2e30ecbeea128d82b4 100644 (file)
--- a/arch/arm/dts/sun7i-a20-olinuxino-lime.dts
+++ b/arch/arm/dts/sun7i-a20-olinuxino-lime.dts
@@ -105,7 +105,7 @@
 
 &gmac {
        pinctrl-names = "default";
-       pinctrl-0 = <&gmac_pins_mii_a>;
+       pinctrl-0 = <&gmac_mii_pins>;
        phy = <&phy1>;
        phy-mode = "mii";
        status = "okay";
@@ -126,8 +126,6 @@
 };
 
 &i2c0 {
-       pinctrl-names = "default";
-       pinctrl-0 = <&i2c0_pins_a>;
        status = "okay";
 
        axp209: pmic@34 {
@@ -142,8 +140,6 @@
 };
 
 &i2c1 {
-       pinctrl-names = "default";
-       pinctrl-0 = <&i2c1_pins_a>;
        status = "okay";
 
        eeprom: eeprom@50 {
@@ -154,8 +150,6 @@
 };
 
 &mmc0 {
-       pinctrl-names = "default";
-       pinctrl-0 = <&mmc0_pins_a>;
        vmmc-supply = <&reg_vcc3v3>;
        bus-width = <4>;
        cd-gpios = <&pio 7 1 GPIO_ACTIVE_LOW>; /* PH1 */
@@ -175,24 +169,19 @@
 };
 
 &pio {
-       ahci_pwr_pin_olinuxinolime: ahci_pwr_pin@1 {
-               pins = "PC3";
-               function = "gpio_out";
-       };
-
-       led_pins_olinuxinolime: led_pins@0 {
+       led_pins_olinuxinolime: led-pins {
                pins = "PH2";
                function = "gpio_out";
                drive-strength = <20>;
        };
 
-       usb0_id_detect_pin: usb0_id_detect_pin@0 {
+       usb0_id_detect_pin: usb0-id-detect-pin {
                pins = "PH4";
                function = "gpio_in";
                bias-pull-up;
        };
 
-       usb0_vbus_detect_pin: usb0_vbus_detect_pin@0 {
+       usb0_vbus_detect_pin: usb0-vbus-detect-pin {
                pins = "PH5";
                function = "gpio_in";
                bias-pull-down;
@@ -200,7 +189,6 @@
 };
 
 &reg_ahci_5v {
-       pinctrl-0 = <&ahci_pwr_pin_olinuxinolime>;
        gpio = <&pio 2 3 GPIO_ACTIVE_HIGH>;
        status = "okay";
 };
@@ -219,7 +207,7 @@
 
 &uart0 {
        pinctrl-names = "default";
-       pinctrl-0 = <&uart0_pins_a>;
+       pinctrl-0 = <&uart0_pb_pins>;
        status = "okay";
 };