Merge tag 'u-boot-imx-20191105' of https://gitlab.denx.de/u-boot/custodians/u-boot-imx

[oweals/u-boot.git] / arch / arm / dts / sun7i-a20-olinuxino-lime.dts

diff --git a/arch/arm/dts/sun7i-a20-olinuxino-lime.dts b/arch/arm/dts/sun7i-a20-olinuxino-lime.dts
index 6592cb21e32c8d9c921ec2762a5aad777974a81f..5e411194bf62bbd876176c2e30ecbeea128d82b4 100644 (file)
--- a/arch/arm/dts/sun7i-a20-olinuxino-lime.dts
+++ b/arch/arm/dts/sun7i-a20-olinuxino-lime.dts
@@ -19,11 +19,6 @@
  *     MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
  *     GNU General Public License for more details.
  *
- *     You should have received a copy of the GNU General Public
- *     License along with this file; if not, write to the Free
- *     Software Foundation, Inc., 51 Franklin St, Fifth Floor, Boston,
- *     MA 02110-1301 USA
- *
  * Or, alternatively,
  *
  *  b) Permission is hereby granted, free of charge, to any person
@@ -54,7 +49,6 @@
 
 #include <dt-bindings/gpio/gpio.h>
 #include <dt-bindings/interrupt-controller/irq.h>
-#include <dt-bindings/pinctrl/sun4i-a10.h>
 
 / {
        model = "Olimex A20-OLinuXino-LIME";
@@ -68,6 +62,17 @@
                stdout-path = "serial0:115200n8";
        };
 
+       hdmi-connector {
+               compatible = "hdmi-connector";
+               type = "a";
+
+               port {
+                       hdmi_con_in: endpoint {
+                               remote-endpoint = <&hdmi_out_con>;
+                       };
+               };
+       };
+
        leds {
                compatible = "gpio-leds";
                pinctrl-names = "default";
@@ -86,6 +91,10 @@
        status = "okay";
 };
 
+&de {
+       status = "okay";
+};
+
 &ehci0 {
        status = "okay";
 };
@@ -96,7 +105,7 @@
 
 &gmac {
        pinctrl-names = "default";
-       pinctrl-0 = <&gmac_pins_mii_a>;
+       pinctrl-0 = <&gmac_mii_pins>;
        phy = <&phy1>;
        phy-mode = "mii";
        status = "okay";
@@ -106,9 +115,17 @@
        };
 };
 
+&hdmi {
+       status = "okay";
+};
+
+&hdmi_out {
+       hdmi_out_con: endpoint {
+               remote-endpoint = <&hdmi_con_in>;
+       };
+};
+
 &i2c0 {
-       pinctrl-names = "default";
-       pinctrl-0 = <&i2c0_pins_a>;
        status = "okay";
 
        axp209: pmic@34 {
@@ -122,13 +139,20 @@
        };
 };
 
+&i2c1 {
+       status = "okay";
+
+       eeprom: eeprom@50 {
+               compatible = "atmel,24c16";
+               reg = <0x50>;
+               pagesize = <16>;
+       };
+};
+
 &mmc0 {
-       pinctrl-names = "default";
-       pinctrl-0 = <&mmc0_pins_a>, <&mmc0_cd_pin_reference_design>;
        vmmc-supply = <&reg_vcc3v3>;
        bus-width = <4>;
-       cd-gpios = <&pio 7 1 GPIO_ACTIVE_HIGH>; /* PH1 */
-       cd-inverted;
+       cd-gpios = <&pio 7 1 GPIO_ACTIVE_LOW>; /* PH1 */
        status = "okay";
 };
 
@@ -140,28 +164,39 @@
        status = "okay";
 };
 
+&otg_sram {
+       status = "okay";
+};
+
 &pio {
-       ahci_pwr_pin_olinuxinolime: ahci_pwr_pin@1 {
-               allwinner,pins = "PC3";
-               allwinner,function = "gpio_out";
-               allwinner,drive = <SUN4I_PINCTRL_10_MA>;
-               allwinner,pull = <SUN4I_PINCTRL_NO_PULL>;
+       led_pins_olinuxinolime: led-pins {
+               pins = "PH2";
+               function = "gpio_out";
+               drive-strength = <20>;
+       };
+
+       usb0_id_detect_pin: usb0-id-detect-pin {
+               pins = "PH4";
+               function = "gpio_in";
+               bias-pull-up;
        };
 
-       led_pins_olinuxinolime: led_pins@0 {
-               allwinner,pins = "PH2";
-               allwinner,function = "gpio_out";
-               allwinner,drive = <SUN4I_PINCTRL_20_MA>;
-               allwinner,pull = <SUN4I_PINCTRL_NO_PULL>;
+       usb0_vbus_detect_pin: usb0-vbus-detect-pin {
+               pins = "PH5";
+               function = "gpio_in";
+               bias-pull-down;
        };
 };
 
 &reg_ahci_5v {
-       pinctrl-0 = <&ahci_pwr_pin_olinuxinolime>;
        gpio = <&pio 2 3 GPIO_ACTIVE_HIGH>;
        status = "okay";
 };
 
+&reg_usb0_vbus {
+       status = "okay";
+};
+
 &reg_usb1_vbus {
        status = "okay";
 };
@@ -172,11 +207,21 @@
 
 &uart0 {
        pinctrl-names = "default";
-       pinctrl-0 = <&uart0_pins_a>;
+       pinctrl-0 = <&uart0_pb_pins>;
+       status = "okay";
+};
+
+&usb_otg {
+       dr_mode = "otg";
        status = "okay";
 };
 
 &usbphy {
+       pinctrl-names = "default";
+       pinctrl-0 = <&usb0_id_detect_pin>, <&usb0_vbus_detect_pin>;
+       usb0_id_det-gpio = <&pio 7 4 GPIO_ACTIVE_HIGH>; /* PH4 */
+       usb0_vbus_det-gpio = <&pio 7 5 GPIO_ACTIVE_HIGH>; /* PH5 */
+       usb0_vbus-supply = <&reg_usb0_vbus>;
        usb1_vbus-supply = <&reg_usb1_vbus>;
        usb2_vbus-supply = <&reg_usb2_vbus>;
        status = "okay";