imx8: Replace SC_R_LAST with SC_R_NONE in DTB

[oweals/u-boot.git] / arch / arm / dts / sun7i-a20-lamobo-r1.dts

diff --git a/arch/arm/dts/sun7i-a20-lamobo-r1.dts b/arch/arm/dts/sun7i-a20-lamobo-r1.dts
index 975b0b278bea1dbbb800e8e020446c540cf5da3c..f91e1bee44e8c3454d5214f72df87726adfb91a4 100644 (file)
--- a/arch/arm/dts/sun7i-a20-lamobo-r1.dts
+++ b/arch/arm/dts/sun7i-a20-lamobo-r1.dts
@@ -46,7 +46,6 @@
 
 #include <dt-bindings/gpio/gpio.h>
 #include <dt-bindings/interrupt-controller/irq.h>
-#include <dt-bindings/pinctrl/sun4i-a10.h>
 
 / {
        model = "Lamobo R1";
@@ -62,10 +61,19 @@
                stdout-path = "serial0:115200n8";
        };
 
+       hdmi-connector {
+               compatible = "hdmi-connector";
+               type = "a";
+
+               port {
+                       hdmi_con_in: endpoint {
+                               remote-endpoint = <&hdmi_out_con>;
+                       };
+               };
+       };
+
        leds {
                compatible = "gpio-leds";
-               pinctrl-names = "default";
-               pinctrl-0 = <&led_pins_lamobo_r1>;
 
                green {
                        label = "lamobo_r1:green:usr";
@@ -75,8 +83,6 @@
 
        reg_gmac_3v3: gmac-3v3 {
                compatible = "regulator-fixed";
-               pinctrl-names = "default";
-               pinctrl-0 = <&gmac_power_pin_lamobo_r1>;
                regulator-name = "gmac-3v3";
                regulator-min-microvolt = <3300000>;
                regulator-max-microvolt = <3300000>;
@@ -86,27 +92,21 @@
        };
 };
 
-&ahci_pwr_pin_a {
-       allwinner,pins = "PB3";
-};
-
 &ahci {
        target-supply = <&reg_ahci_5v>;
        status = "okay";
 };
 
+&codec {
+       status = "okay";
+};
+
 &cpu0 {
        cpu-supply = <&reg_dcdc2>;
-       operating-points = <
-               /* kHz    uV */
-               960000  1400000
-               912000  1400000
-               864000  1350000
-               720000  1250000
-               528000  1150000
-               312000  1100000
-               144000  1050000
-               >;
+};
+
+&de {
+       status = "okay";
 };
 
 &ehci0 {
@@ -119,20 +119,82 @@
 
 &gmac {
        pinctrl-names = "default";
-       pinctrl-0 = <&gmac_pins_rgmii_a>;
-       phy = <&phy1>;
+       pinctrl-0 = <&gmac_rgmii_pins>;
        phy-mode = "rgmii";
        phy-supply = <&reg_gmac_3v3>;
        status = "okay";
+       /delete-property/#address-cells;
+       /delete-property/#size-cells;
+
+       fixed-link {
+               speed = <1000>;
+               full-duplex;
+       };
+
+       mdio {
+               compatible = "snps,dwmac-mdio";
+               #address-cells = <1>;
+               #size-cells = <0>;
+
+               switch: ethernet-switch@1e {
+                       compatible = "brcm,bcm53125";
+                       reg = <30>;
+
+                       ports {
+                               #address-cells = <1>;
+                               #size-cells = <0>;
+
+                               port0: port@0 {
+                                       reg = <0>;
+                                       label = "lan2";
+                               };
+
+                               port1: port@1 {
+                                       reg = <1>;
+                                       label = "lan3";
+                               };
+
+                               port2: port@2 {
+                                       reg = <2>;
+                                       label = "lan4";
+                               };
+
+                               port3: port@3 {
+                                       reg = <3>;
+                                       label = "wan";
+                               };
+
+                               port4: port@4 {
+                                       reg = <4>;
+                                       label = "lan1";
+                               };
+
+                               port8: port@8 {
+                                       reg = <8>;
+                                       label = "cpu";
+                                       ethernet = <&gmac>;
+                                       phy-mode = "rgmii-txid";
+                                       fixed-link {
+                                               speed = <1000>;
+                                               full-duplex;
+                                       };
+                               };
+                       };
+               };
+       };
+};
+
+&hdmi {
+       status = "okay";
+};
 
-       phy1: ethernet-phy@1 {
-               reg = <1>;
+&hdmi_out {
+       hdmi_out_con: endpoint {
+               remote-endpoint = <&hdmi_con_in>;
        };
 };
 
 &i2c0 {
-       pinctrl-names = "default";
-       pinctrl-0 = <&i2c0_pins_a>;
        status = "okay";
 
        axp209: pmic@34 {
@@ -143,24 +205,19 @@
 };
 
 &i2c2 {
-       pinctrl-names = "default";
-       pinctrl-0 = <&i2c2_pins_a>;
        status = "okay";
 };
 
 &ir0 {
        pinctrl-names = "default";
-       pinctrl-0 = <&ir0_rx_pins_a>;
+       pinctrl-0 = <&ir0_rx_pin>;
        status = "okay";
 };
 
 &mmc0 {
-       pinctrl-names = "default";
-       pinctrl-0 = <&mmc0_pins_a>, <&mmc0_cd_pin_lamobo_r1>;
        vmmc-supply = <&reg_vcc3v3>;
        bus-width = <4>;
-       cd-gpios = <&pio 7 10 GPIO_ACTIVE_HIGH>; /* PH10 */
-       cd-inverted;
+       cd-gpios = <&pio 7 10 GPIO_ACTIVE_LOW>; /* PH10 */
        status = "okay";
 };
 
@@ -168,48 +225,30 @@
        status = "okay";
 };
 
-&ohci1 {
-       status = "okay";
-};
-
 &otg_sram {
        status = "okay";
 };
 
 &pio {
-       usb0_id_detect_pin: usb0_id_detect_pin@0 {
-               allwinner,pins = "PH4";
-               allwinner,function = "gpio_in";
-               allwinner,drive = <SUN4I_PINCTRL_10_MA>;
-               allwinner,pull = <SUN4I_PINCTRL_PULL_UP>;
-       };
-
-       mmc0_cd_pin_lamobo_r1: mmc0_cd_pin@0 {
-               allwinner,pins = "PH10";
-               allwinner,function = "gpio_in";
-               allwinner,drive = <SUN4I_PINCTRL_10_MA>;
-               allwinner,pull = <SUN4I_PINCTRL_PULL_UP>;
+       usb0_id_detect_pin: usb0-id-detect-pin {
+               pins = "PH4";
+               function = "gpio_in";
+               bias-pull-up;
        };
+};
 
-       gmac_power_pin_lamobo_r1: gmac_power_pin@0 {
-               allwinner,pins = "PH23";
-               allwinner,function = "gpio_out";
-               allwinner,drive = <SUN4I_PINCTRL_10_MA>;
-               allwinner,pull = <SUN4I_PINCTRL_NO_PULL>;
-       };
+#include "axp209.dtsi"
 
-       led_pins_lamobo_r1: led_pins@0 {
-               allwinner,pins = "PH24";
-               allwinner,function = "gpio_out";
-               allwinner,drive = <SUN4I_PINCTRL_10_MA>;
-               allwinner,pull = <SUN4I_PINCTRL_NO_PULL>;
-       };
+&ac_power_supply {
+       status = "okay";
 };
 
-#include "axp209.dtsi"
+&battery_power_supply {
+       status = "okay";
+};
 
 &reg_ahci_5v {
-       gpio = <&pio 1 3 0>; /* PB3 */
+       gpio = <&pio 1 3 GPIO_ACTIVE_HIGH>; /* PB3 */
        status = "okay";
 };
 
@@ -242,37 +281,34 @@
        status = "okay";
 };
 
-&reg_usb1_vbus {
-       status = "okay";
-};
-
 &reg_usb2_vbus {
+       gpio = <&pio 7 12 GPIO_ACTIVE_HIGH>; /* PH12 */
        status = "okay";
 };
 
 &spi0 {
        pinctrl-names = "default";
-       pinctrl-0 = <&spi0_pins_a>,
-                   <&spi0_cs0_pins_a>,
-                   <&spi0_cs1_pins_a>;
+       pinctrl-0 = <&spi0_pi_pins>,
+                   <&spi0_cs0_pi_pin>,
+                   <&spi0_cs1_pi_pin>;
        status = "okay";
 };
 
 &uart0 {
        pinctrl-names = "default";
-       pinctrl-0 = <&uart0_pins_a>;
+       pinctrl-0 = <&uart0_pb_pins>;
        status = "okay";
 };
 
 &uart3 {
        pinctrl-names = "default";
-       pinctrl-0 = <&uart3_pins_b>;
+       pinctrl-0 = <&uart3_ph_pins>;
        status = "okay";
 };
 
 &uart7 {
        pinctrl-names = "default";
-       pinctrl-0 = <&uart7_pins_a>;
+       pinctrl-0 = <&uart7_pi_pins>;
        status = "okay";
 };
 
@@ -291,7 +327,6 @@
        usb0_id_det-gpio = <&pio 7 4 GPIO_ACTIVE_HIGH>; /* PH4 */
        usb0_vbus_power-supply = <&usb_power_supply>;
        usb0_vbus-supply = <&reg_usb0_vbus>;
-       usb1_vbus-supply = <&reg_usb1_vbus>;
        usb2_vbus-supply = <&reg_usb2_vbus>;
        status = "okay";
 };