Merge https://gitlab.denx.de/u-boot/custodians/u-boot-i2c

[oweals/u-boot.git] / arch / arm / dts / sun7i-a20-i12-tvbox.dts

diff --git a/arch/arm/dts/sun7i-a20-i12-tvbox.dts b/arch/arm/dts/sun7i-a20-i12-tvbox.dts
index 1e6bd360dac0eaae2c7a651e35000ba6924e72fa..5f1c4f573d3eac3cbb3c900014119b97a629a78f 100644 (file)
--- a/arch/arm/dts/sun7i-a20-i12-tvbox.dts
+++ b/arch/arm/dts/sun7i-a20-i12-tvbox.dts
@@ -46,7 +46,6 @@
 
 #include <dt-bindings/gpio/gpio.h>
 #include <dt-bindings/interrupt-controller/irq.h>
-#include <dt-bindings/pinctrl/sun4i-a10.h>
 
 / {
        model = "I12 / Q5 / QT840A A20 tvbox";
@@ -62,8 +61,6 @@
 
        leds {
                compatible = "gpio-leds";
-               pinctrl-names = "default";
-               pinctrl-0 = <&led_pins_i12_tvbox>;
 
                red {
                        label = "i12_tvbox:red:usr";
@@ -78,8 +75,6 @@
 
        reg_vmmc3: vmmc3 {
                compatible = "regulator-fixed";
-               pinctrl-names = "default";
-               pinctrl-0 = <&vmmc3_pin_i12_tvbox>;
                regulator-name = "vmmc3";
                regulator-min-microvolt = <3300000>;
                regulator-max-microvolt = <3300000>;
@@ -89,8 +84,6 @@
 
        reg_vmmc3_io: vmmc3-io {
                compatible = "regulator-fixed";
-               pinctrl-names = "default";
-               pinctrl-0 = <&vmmc3_io_pin_i12_tvbox>;
                regulator-name = "vmmc3-io";
                regulator-min-microvolt = <3300000>;
                regulator-max-microvolt = <3300000>;
@@ -102,8 +95,6 @@
 
        reg_gmac_3v3: gmac-3v3 {
                compatible = "regulator-fixed";
-               pinctrl-names = "default";
-               pinctrl-0 = <&gmac_power_pin_i12_tvbox>;
                regulator-name = "gmac-3v3";
                regulator-min-microvolt = <3300000>;
                regulator-max-microvolt = <3300000>;
@@ -123,7 +114,7 @@
 
 &gmac {
        pinctrl-names = "default";
-       pinctrl-0 = <&gmac_pins_mii_a>;
+       pinctrl-0 = <&gmac_mii_pins>;
        phy = <&phy1>;
        phy-mode = "mii";
        phy-supply = <&reg_gmac_3v3>;
@@ -135,8 +126,6 @@
 };
 
 &i2c0 {
-       pinctrl-names = "default";
-       pinctrl-0 = <&i2c0_pins_a>;
        status = "okay";
 
        axp209: pmic@34 {
@@ -152,29 +141,24 @@
 
 &ir0 {
        pinctrl-names = "default";
-       pinctrl-0 = <&ir0_rx_pins_a>;
+       pinctrl-0 = <&ir0_rx_pin>;
        status = "okay";
 };
 
 &mmc0 {
-       pinctrl-names = "default";
-       pinctrl-0 = <&mmc0_pins_a>, <&mmc0_cd_pin_reference_design>;
        vmmc-supply = <&reg_vcc3v3>;
        bus-width = <4>;
-       cd-gpios = <&pio 7 1 GPIO_ACTIVE_HIGH>; /* PH1 */
-       cd-inverted;
+       cd-gpios = <&pio 7 1 GPIO_ACTIVE_LOW>; /* PH1 */
        status = "okay";
 };
 
 &mmc3 {
-       pinctrl-names = "default";
-       pinctrl-0 = <&mmc3_pins_a>;
        vmmc-supply = <&reg_vmmc3>;
        bus-width = <4>;
        non-removable;
        status = "okay";
 
-       brcmf: bcrmf@1 {
+       brcmf: wifi@1 {
                reg = <1>;
                compatible = "brcm,bcm4329-fmac";
                interrupt-parent = <&pio>;
@@ -183,11 +167,6 @@
        };
 };
 
-&mmc3_pins_a {
-       /* AP6210 / AP6330 requires pull-up */
-       allwinner,pull = <SUN4I_PINCTRL_PULL_UP>;
-};
-
 &ohci0 {
        status = "okay";
 };
@@ -196,36 +175,6 @@
        status = "okay";
 };
 
-&pio {
-       vmmc3_pin_i12_tvbox: vmmc3_pin@0 {
-               allwinner,pins = "PH2";
-               allwinner,function = "gpio_out";
-               allwinner,drive = <SUN4I_PINCTRL_10_MA>;
-               allwinner,pull = <SUN4I_PINCTRL_NO_PULL>;
-       };
-
-       vmmc3_io_pin_i12_tvbox: vmmc3_io_pin@0 {
-               allwinner,pins = "PH12";
-               allwinner,function = "gpio_out";
-               allwinner,drive = <SUN4I_PINCTRL_10_MA>;
-               allwinner,pull = <SUN4I_PINCTRL_NO_PULL>;
-       };
-
-       gmac_power_pin_i12_tvbox: gmac_power_pin@0 {
-               allwinner,pins = "PH21";
-               allwinner,function = "gpio_out";
-               allwinner,drive = <SUN4I_PINCTRL_10_MA>;
-               allwinner,pull = <SUN4I_PINCTRL_NO_PULL>;
-       };
-
-       led_pins_i12_tvbox: led_pins@0 {
-               allwinner,pins = "PH9", "PH20";
-               allwinner,function = "gpio_out";
-               allwinner,drive = <SUN4I_PINCTRL_10_MA>;
-               allwinner,pull = <SUN4I_PINCTRL_NO_PULL>;
-       };
-};
-
 &reg_usb1_vbus {
        status = "okay";
 };
@@ -236,7 +185,7 @@
 
 &uart0 {
        pinctrl-names = "default";
-       pinctrl-0 = <&uart0_pins_a>;
+       pinctrl-0 = <&uart0_pb_pins>;
        status = "okay";
 };