rockchip: rk3328: rock64 - fix gen3 SPL hang

[oweals/u-boot.git] / arch / arm / dts / sun7i-a20-cubietruck.dts

diff --git a/arch/arm/dts/sun7i-a20-cubietruck.dts b/arch/arm/dts/sun7i-a20-cubietruck.dts
index e6b019232a9e880ea48a9b7f9dd975f6846be84e..99f531b8d2a78a2676bd34812e4a1127d214394e 100644 (file)
--- a/arch/arm/dts/sun7i-a20-cubietruck.dts
+++ b/arch/arm/dts/sun7i-a20-cubietruck.dts
@@ -48,7 +48,6 @@
 
 #include <dt-bindings/gpio/gpio.h>
 #include <dt-bindings/interrupt-controller/irq.h>
-#include <dt-bindings/pinctrl/sun4i-a10.h>
 
 / {
        model = "Cubietech Cubietruck";
@@ -62,10 +61,19 @@
                stdout-path = "serial0:115200n8";
        };
 
+       hdmi-connector {
+               compatible = "hdmi-connector";
+               type = "a";
+
+               port {
+                       hdmi_con_in: endpoint {
+                               remote-endpoint = <&hdmi_out_con>;
+                       };
+               };
+       };
+
        leds {
                compatible = "gpio-leds";
-               pinctrl-names = "default";
-               pinctrl-0 = <&led_pins_cubietruck>;
 
                blue {
                        label = "cubietruck:blue:usr";
@@ -90,9 +98,27 @@
 
        mmc3_pwrseq: mmc3_pwrseq {
                compatible = "mmc-pwrseq-simple";
-               pinctrl-names = "default";
-               pinctrl-0 = <&mmc3_pwrseq_pin_cubietruck>;
                reset-gpios = <&pio 7 9 GPIO_ACTIVE_LOW>; /* PH9 WIFI_EN */
+               clocks = <&ccu CLK_OUT_A>;
+               clock-names = "ext_clock";
+       };
+
+       sound {
+               compatible = "simple-audio-card";
+               simple-audio-card,name = "On-board SPDIF";
+
+               simple-audio-card,cpu {
+                       sound-dai = <&spdif>;
+               };
+
+               simple-audio-card,codec {
+                       sound-dai = <&spdif_out>;
+               };
+       };
+
+       spdif_out: spdif-out {
+               #sound-dai-cells = <0>;
+               compatible = "linux,spdif-dit";
        };
 };
 
@@ -101,10 +127,18 @@
        status = "okay";
 };
 
+&codec {
+       status = "okay";
+};
+
 &cpu0 {
        cpu-supply = <&reg_dcdc2>;
 };
 
+&de {
+       status = "okay";
+};
+
 &ehci0 {
        status = "okay";
 };
@@ -115,7 +149,7 @@
 
 &gmac {
        pinctrl-names = "default";
-       pinctrl-0 = <&gmac_pins_rgmii_a>;
+       pinctrl-0 = <&gmac_rgmii_pins>;
        phy = <&phy1>;
        phy-mode = "rgmii";
        status = "okay";
@@ -125,9 +159,17 @@
        };
 };
 
+&hdmi {
+       status = "okay";
+};
+
+&hdmi_out {
+       hdmi_out_con: endpoint {
+               remote-endpoint = <&hdmi_con_in>;
+       };
+};
+
 &i2c0 {
-       pinctrl-names = "default";
-       pinctrl-0 = <&i2c0_pins_a>;
        status = "okay";
 
        axp209: pmic@34 {
@@ -139,42 +181,34 @@
 
 &i2c1 {
        pinctrl-names = "default";
-       pinctrl-0 = <&i2c1_pins_a>;
        status = "okay";
 };
 
 &i2c2 {
-       pinctrl-names = "default";
-       pinctrl-0 = <&i2c2_pins_a>;
        status = "okay";
 };
 
 &ir0 {
        pinctrl-names = "default";
-       pinctrl-0 = <&ir0_rx_pins_a>;
+       pinctrl-0 = <&ir0_rx_pin>;
        status = "okay";
 };
 
 &mmc0 {
-       pinctrl-names = "default";
-       pinctrl-0 = <&mmc0_pins_a>, <&mmc0_cd_pin_reference_design>;
        vmmc-supply = <&reg_vcc3v3>;
        bus-width = <4>;
-       cd-gpios = <&pio 7 1 GPIO_ACTIVE_HIGH>; /* PH1 */
-       cd-inverted;
+       cd-gpios = <&pio 7 1 GPIO_ACTIVE_LOW>; /* PH1 */
        status = "okay";
 };
 
 &mmc3 {
-       pinctrl-names = "default";
-       pinctrl-0 = <&mmc3_pins_a>;
        vmmc-supply = <&reg_vcc3v3>;
        mmc-pwrseq = <&mmc3_pwrseq>;
        bus-width = <4>;
        non-removable;
        status = "okay";
 
-       brcmf: bcrmf@1 {
+       brcmf: wifi@1 {
                reg = <1>;
                compatible = "brcm,bcm4329-fmac";
                interrupt-parent = <&pio>;
@@ -183,11 +217,6 @@
        };
 };
 
-&mmc3_pins_a {
-       /* AP6210 requires pull-up */
-       allwinner,pull = <SUN4I_PINCTRL_PULL_UP>;
-};
-
 &ohci0 {
        status = "okay";
 };
@@ -201,63 +230,32 @@
 };
 
 &pio {
-       ahci_pwr_pin_cubietruck: ahci_pwr_pin@1 {
-               allwinner,pins = "PH12";
-               allwinner,function = "gpio_out";
-               allwinner,drive = <SUN4I_PINCTRL_10_MA>;
-               allwinner,pull = <SUN4I_PINCTRL_NO_PULL>;
-       };
-
-       led_pins_cubietruck: led_pins@0 {
-               allwinner,pins = "PH7", "PH11", "PH20", "PH21";
-               allwinner,function = "gpio_out";
-               allwinner,drive = <SUN4I_PINCTRL_10_MA>;
-               allwinner,pull = <SUN4I_PINCTRL_NO_PULL>;
-       };
-
-       mmc3_pwrseq_pin_cubietruck: mmc3_pwrseq_pin@0 {
-               allwinner,pins = "PH9";
-               allwinner,function = "gpio_out";
-               allwinner,drive = <SUN4I_PINCTRL_10_MA>;
-               allwinner,pull = <SUN4I_PINCTRL_NO_PULL>;
-       };
-
-       usb0_vbus_pin_a: usb0_vbus_pin@0 {
-               allwinner,pins = "PH17";
-               allwinner,function = "gpio_out";
-               allwinner,drive = <SUN4I_PINCTRL_10_MA>;
-               allwinner,pull = <SUN4I_PINCTRL_NO_PULL>;
-       };
-
-       usb0_id_detect_pin: usb0_id_detect_pin@0 {
-               allwinner,pins = "PH19";
-               allwinner,function = "gpio_in";
-               allwinner,drive = <SUN4I_PINCTRL_10_MA>;
-               allwinner,pull = <SUN4I_PINCTRL_NO_PULL>;
-       };
-
-       usb0_vbus_detect_pin: usb0_vbus_detect_pin@0 {
-               allwinner,pins = "PH22";
-               allwinner,function = "gpio_in";
-               allwinner,drive = <SUN4I_PINCTRL_10_MA>;
-               allwinner,pull = <SUN4I_PINCTRL_NO_PULL>;
-       };
+       /* Pin outputs low power clock for WiFi and BT */
+       pinctrl-0 = <&clk_out_a_pin>;
+       pinctrl-names = "default";
 };
 
 &pwm {
        pinctrl-names = "default";
-       pinctrl-0 = <&pwm0_pins_a>, <&pwm1_pins_a>;
+       pinctrl-0 = <&pwm0_pin>, <&pwm1_pin>;
        status = "okay";
 };
 
 &reg_ahci_5v {
-       pinctrl-0 = <&ahci_pwr_pin_cubietruck>;
        gpio = <&pio 7 12 GPIO_ACTIVE_HIGH>;
        status = "okay";
 };
 
 #include "axp209.dtsi"
 
+&ac_power_supply {
+       status = "okay";
+};
+
+&battery_power_supply {
+       status = "okay";
+};
+
 &reg_dcdc2 {
        regulator-always-on;
        regulator-min-microvolt = <1000000>;
@@ -284,7 +282,6 @@
 };
 
 &reg_usb0_vbus {
-       pinctrl-0 = <&usb0_vbus_pin_a>;
        gpio = <&pio 7 17 GPIO_ACTIVE_HIGH>;
        status = "okay";
 };
@@ -297,22 +294,48 @@
        status = "okay";
 };
 
+&spdif {
+       pinctrl-names = "default";
+       pinctrl-0 = <&spdif_tx_pin>;
+       status = "okay";
+};
+
 &uart0 {
        pinctrl-names = "default";
-       pinctrl-0 = <&uart0_pins_a>;
+       pinctrl-0 = <&uart0_pb_pins>;
        status = "okay";
 };
 
+&uart2 {
+       pinctrl-names = "default";
+       pinctrl-0 = <&uart2_pi_pins>, <&uart2_cts_rts_pi_pins>;
+       uart-has-rtscts;
+       status = "okay";
+
+       bluetooth {
+               compatible = "brcm,bcm20702a1";
+               clocks = <&ccu CLK_OUT_A>;
+               clock-names = "lpo";
+               device-wakeup-gpios = <&pio 7 24 GPIO_ACTIVE_LOW>; /* PH24 */
+               host-wakeup-gpios = <&pio 7 25 GPIO_ACTIVE_LOW>; /* PH25 */
+               shutdown-gpios = <&pio 7 18 GPIO_ACTIVE_HIGH>; /* PH18 */
+               max-speed = <1500000>;
+       };
+};
+
 &usb_otg {
        dr_mode = "otg";
        status = "okay";
 };
 
+&usb_power_supply {
+       status = "okay";
+};
+
 &usbphy {
-       pinctrl-names = "default";
-       pinctrl-0 = <&usb0_id_detect_pin>, <&usb0_vbus_detect_pin>;
        usb0_id_det-gpios = <&pio 7 19 GPIO_ACTIVE_HIGH>; /* PH19 */
        usb0_vbus_det-gpios = <&pio 7 22 GPIO_ACTIVE_HIGH>; /* PH22 */
+       usb0_vbus_power-supply = <&usb_power_supply>;
        usb0_vbus-supply = <&reg_usb0_vbus>;
        usb1_vbus-supply = <&reg_usb1_vbus>;
        usb2_vbus-supply = <&reg_usb2_vbus>;