Merge branch 'master' of git://git.denx.de/u-boot-sh

[oweals/u-boot.git] / arch / arm / dts / sun6i-a31s-sinovoip-bpi-m2.dts

diff --git a/arch/arm/dts/sun6i-a31s-sinovoip-bpi-m2.dts b/arch/arm/dts/sun6i-a31s-sinovoip-bpi-m2.dts
index db7fa13f5425e46981102d2c6e247535b082be0e..b8b79c0e9ee051255762e7d7d10e76422130fabd 100644 (file)
--- a/arch/arm/dts/sun6i-a31s-sinovoip-bpi-m2.dts
+++ b/arch/arm/dts/sun6i-a31s-sinovoip-bpi-m2.dts
@@ -42,7 +42,6 @@
 
 /dts-v1/;
 #include "sun6i-a31s.dtsi"
-#include "sunxi-common-regulators.dtsi"
 #include <dt-bindings/gpio/gpio.h>
 
 / {
@@ -86,6 +85,10 @@
        };
 };
 
+&cpu0 {
+       cpu-supply = <&reg_dcdc3>;
+};
+
 &ehci0 {
        status = "okay";
 };
@@ -95,6 +98,7 @@
        pinctrl-0 = <&gmac_pins_rgmii_a>, <&gmac_phy_reset_pin_bpi_m2>;
        phy = <&phy1>;
        phy-mode = "rgmii";
+       phy-supply = <&reg_dldo1>;
        snps,reset-gpio = <&pio 0 21 GPIO_ACTIVE_HIGH>; /* PA21 */
        snps,reset-active-low;
        snps,reset-delays-us = <0 10000 30000>;
@@ -114,27 +118,26 @@
 &mmc0 {
        pinctrl-names = "default";
        pinctrl-0 = <&mmc0_pins_a>, <&mmc0_cd_pin_bpi_m2>;
-       vmmc-supply = <&reg_vcc3v0>;
+       vmmc-supply = <&reg_dcdc1>;
        bus-width = <4>;
-       cd-gpios = <&pio 0 4 GPIO_ACTIVE_HIGH>; /* PA4 */
-       cd-inverted;
+       cd-gpios = <&pio 0 4 GPIO_ACTIVE_LOW>; /* PA4 */
        status = "okay";
 };
 
 &mmc0_pins_a {
-       allwinner,pull = <SUN4I_PINCTRL_PULL_UP>;
+       bias-pull-up;
 };
 
 &mmc2 {
        pinctrl-names = "default";
        pinctrl-0 = <&mmc2_pins_a>;
-       vmmc-supply = <&reg_vcc3v0>;
+       vmmc-supply = <&reg_aldo1>;
        mmc-pwrseq = <&mmc2_pwrseq>;
        bus-width = <4>;
        non-removable;
        status = "okay";
 
-       brcmf: bcrmf@1 {
+       brcmf: wifi@1 {
                reg = <1>;
                compatible = "brcm,bcm4329-fmac";
                interrupt-parent = <&r_pio>;
@@ -144,45 +147,148 @@
 };
 
 &mmc2_pins_a {
-       allwinner,pull = <SUN4I_PINCTRL_PULL_UP>;
+       bias-pull-up;
 };
 
 &ohci0 {
        status = "okay";
 };
 
+&p2wi {
+       status = "okay";
+
+       axp22x: pmic@68 {
+               compatible = "x-powers,axp221";
+               reg = <0x68>;
+               interrupt-parent = <&nmi_intc>;
+               interrupts = <0 IRQ_TYPE_LEVEL_LOW>;
+               eldoin-supply = <&reg_dcdc1>;
+               x-powers,drive-vbus-en;
+       };
+};
+
 &pio {
        gmac_phy_reset_pin_bpi_m2: gmac_phy_reset_pin@0 {
-               allwinner,pins = "PA21";
-               allwinner,function = "gpio_out";
-               allwinner,drive = <SUN4I_PINCTRL_10_MA>;
-               allwinner,pull = <SUN4I_PINCTRL_NO_PULL>;
+               pins = "PA21";
+               function = "gpio_out";
        };
 
        led_pins_bpi_m2: led_pins@0 {
-               allwinner,pins = "PG5", "PG10", "PG11";
-               allwinner,function = "gpio_out";
-               allwinner,drive = <SUN4I_PINCTRL_10_MA>;
-               allwinner,pull = <SUN4I_PINCTRL_NO_PULL>;
+               pins = "PG5", "PG10", "PG11";
+               function = "gpio_out";
        };
 
        mmc0_cd_pin_bpi_m2: mmc0_cd_pin@0 {
-               allwinner,pins = "PA4";
-               allwinner,function = "gpio_in";
-               allwinner,drive = <SUN4I_PINCTRL_10_MA>;
-               allwinner,pull = <SUN4I_PINCTRL_PULL_UP>;
+               pins = "PA4";
+               function = "gpio_in";
+               bias-pull-up;
        };
 };
 
 &r_pio {
        mmc2_pwrseq_pin_bpi_m2: mmc2_pwrseq_pin@0 {
-               allwinner,pins = "PL8";
-               allwinner,function = "gpio_out";
-               allwinner,drive = <SUN4I_PINCTRL_10_MA>;
-               allwinner,pull = <SUN4I_PINCTRL_NO_PULL>;
+               pins = "PL8";
+               function = "gpio_out";
        };
 };
 
+#include "axp22x.dtsi"
+
+&reg_aldo1 {
+       regulator-min-microvolt = <3300000>;
+       regulator-max-microvolt = <3300000>;
+       regulator-name = "vcc-wifi";
+};
+
+&reg_aldo2 {
+       regulator-always-on;
+       regulator-min-microvolt = <2500000>;
+       regulator-max-microvolt = <2500000>;
+       regulator-name = "vcc-gmac";
+};
+
+&reg_aldo3 {
+       regulator-always-on;
+       regulator-min-microvolt = <3000000>;
+       regulator-max-microvolt = <3000000>;
+       regulator-name = "avcc";
+};
+
+&reg_dc5ldo {
+       regulator-always-on;
+       regulator-min-microvolt = <700000>;
+       regulator-max-microvolt = <1320000>;
+       regulator-name = "vdd-cpus";
+};
+
+&reg_dcdc1 {
+       regulator-always-on;
+       regulator-min-microvolt = <3000000>;
+       regulator-max-microvolt = <3000000>;
+       regulator-name = "vdd-3v0";
+};
+
+&reg_dcdc2 {
+       regulator-min-microvolt = <700000>;
+       regulator-max-microvolt = <1320000>;
+       regulator-name = "vdd-gpu";
+};
+
+&reg_dcdc3 {
+       regulator-always-on;
+       regulator-min-microvolt = <700000>;
+       regulator-max-microvolt = <1320000>;
+       regulator-name = "vdd-cpu";
+};
+
+&reg_dcdc4 {
+       regulator-always-on;
+       regulator-min-microvolt = <700000>;
+       regulator-max-microvolt = <1320000>;
+       regulator-name = "vdd-sys-dll";
+};
+
+&reg_dcdc5 {
+       regulator-always-on;
+       regulator-min-microvolt = <1500000>;
+       regulator-max-microvolt = <1500000>;
+       regulator-name = "vcc-dram";
+};
+
+&reg_dldo1 {
+       regulator-min-microvolt = <3000000>;
+       regulator-max-microvolt = <3000000>;
+       regulator-name = "vcc-mac";
+};
+
+&reg_dldo2 {
+       regulator-min-microvolt = <2800000>;
+       regulator-max-microvolt = <2800000>;
+       regulator-name = "avdd-csi";
+};
+
+&reg_dldo3 {
+       regulator-always-on;
+       regulator-min-microvolt = <3300000>;
+       regulator-max-microvolt = <3300000>;
+       regulator-name = "vcc-pb";
+};
+
+&reg_eldo1 {
+       regulator-min-microvolt = <1800000>;
+       regulator-max-microvolt = <1800000>;
+       regulator-name = "vdd-csi";
+       status = "okay";
+};
+
+&reg_ldo_io1 {
+       regulator-always-on;
+       regulator-min-microvolt = <1800000>;
+       regulator-max-microvolt = <1800000>;
+       regulator-name = "vcc-pm-cpus";
+       status = "okay";
+};
+
 &uart0 {
        pinctrl-names = "default";
        pinctrl-0 = <&uart0_pins_a>;