#include <dt-bindings/gpio/gpio.h>
#include <dt-bindings/input/input.h>
-#include <dt-bindings/pinctrl/sun4i-a10.h>
/ {
model = "MSI Primo81 tablet";
compatible = "msi,primo81", "allwinner,sun6i-a31s";
- aliases {
- serial0 = &uart0;
- };
+ hdmi-connector {
+ compatible = "hdmi-connector";
+ type = "c";
- chosen {
- stdout-path = "serial0:115200n8";
+ port {
+ hdmi_con_in: endpoint {
+ remote-endpoint = <&hdmi_out_con>;
+ };
+ };
};
};
cpu-supply = <®_dcdc3>;
};
+&de {
+ status = "okay";
+};
+
&ehci0 {
/* rtl8188etv wifi is connected here */
status = "okay";
};
+&hdmi {
+ status = "okay";
+};
+
+&hdmi_out {
+ hdmi_out_con: endpoint {
+ remote-endpoint = <&hdmi_con_in>;
+ };
+};
+
&i2c0 {
/* pull-ups and device VDDIO use AXP221 DLDO3 */
pinctrl-names = "default";
pinctrl-0 = <&mmc0_pins_a>, <&mmc0_cd_pin_primo81>;
vmmc-supply = <®_dcdc1>;
bus-width = <4>;
- cd-gpios = <&pio 0 8 GPIO_ACTIVE_HIGH>; /* PA8 */
- cd-inverted;
+ cd-gpios = <&pio 0 8 GPIO_ACTIVE_LOW>; /* PA8 */
status = "okay";
};
&pio {
gt911_int_primo81: gt911_int_pin@0 {
- allwinner,pins = "PA3";
- allwinner,function = "gpio_in";
- allwinner,drive = <SUN4I_PINCTRL_10_MA>;
- allwinner,pull = <SUN4I_PINCTRL_NO_PULL>;
+ pins = "PA3";
+ function = "gpio_in";
};
mma8452_int_primo81: mma8452_int_pin@0 {
- allwinner,pins = "PA9";
- allwinner,function = "gpio_in";
- allwinner,drive = <SUN4I_PINCTRL_10_MA>;
- allwinner,pull = <SUN4I_PINCTRL_PULL_UP>;
+ pins = "PA9";
+ function = "gpio_in";
+ bias-pull-up;
};
mmc0_cd_pin_primo81: mmc0_cd_pin@0 {
- allwinner,pins = "PA8";
- allwinner,function = "gpio_in";
- allwinner,drive = <SUN4I_PINCTRL_10_MA>;
- allwinner,pull = <SUN4I_PINCTRL_PULL_UP>;
+ pins = "PA8";
+ function = "gpio_in";
+ bias-pull-up;
};
};
reg = <0x68>;
interrupt-parent = <&nmi_intc>;
interrupts = <0 IRQ_TYPE_LEVEL_LOW>;
+ x-powers,drive-vbus-en;
};
};
#include "axp22x.dtsi"
+&battery_power_supply {
+ status = "okay";
+};
+
®_aldo3 {
regulator-always-on;
regulator-min-microvolt = <2700000>;
};
®_dc1sw {
- regulator-min-microvolt = <3000000>;
- regulator-max-microvolt = <3000000>;
regulator-name = "vcc-lcd";
};
regulator-name = "vddio-csi";
};
+®_drivevbus {
+ regulator-name = "usb0-vbus";
+ status = "okay";
+};
+
®_eldo3 {
regulator-min-microvolt = <1080000>;
regulator-max-microvolt = <1320000>;
};
&usb_otg {
- /* otg support requires support for AXP221 usb-power-supply and GPIO */
- dr_mode = "host";
+ dr_mode = "otg";
+ status = "okay";
+};
+
+&usb_power_supply {
status = "okay";
};
&usbphy {
+ usb0_id_det-gpio = <&pio 0 15 GPIO_ACTIVE_HIGH>; /* PA15 */
+ usb0_vbus_power-supply = <&usb_power_supply>;
+ usb0_vbus-supply = <®_drivevbus>;
usb1_vbus-supply = <®_dldo1>;
status = "okay";
};