#include <dt-bindings/gpio/gpio.h>
#include <dt-bindings/interrupt-controller/irq.h>
-#include <dt-bindings/pinctrl/sun4i-a10.h>
/ {
model = "A10s-Wobo i5";
regulator-name = "emac-3v3";
regulator-min-microvolt = <3300000>;
regulator-max-microvolt = <3300000>;
+ startup-delay-us = <20000>;
enable-active-high;
gpio = <&pio 0 2 GPIO_ACTIVE_HIGH>;
};
&emac {
pinctrl-names = "default";
- pinctrl-0 = <&emac_pins_b>;
+ pinctrl-0 = <&emac_pins_a>;
phy = <&phy1>;
status = "okay";
};
pinctrl-0 = <&mmc0_pins_a>, <&mmc0_cd_pin_wobo_i5>;
vmmc-supply = <®_vcc3v3>;
bus-width = <4>;
- cd-gpios = <&pio 1 3 GPIO_ACTIVE_HIGH>; /* PB3 */
- cd-inverted;
+ cd-gpios = <&pio 1 3 GPIO_ACTIVE_LOW>; /* PB3 */
status = "okay";
};
&pio {
led_pins_wobo_i5: led_pins@0 {
- allwinner,pins = "PB2";
- allwinner,function = "gpio_out";
- allwinner,drive = <SUN4I_PINCTRL_10_MA>;
- allwinner,pull = <SUN4I_PINCTRL_NO_PULL>;
+ pins = "PB2";
+ function = "gpio_out";
};
mmc0_cd_pin_wobo_i5: mmc0_cd_pin@0 {
- allwinner,pins = "PB3";
- allwinner,function = "gpio_in";
- allwinner,drive = <SUN4I_PINCTRL_10_MA>;
- allwinner,pull = <SUN4I_PINCTRL_PULL_UP>;
+ pins = "PB3";
+ function = "gpio_in";
+ bias-pull-up;
};
emac_power_pin_wobo: emac_power_pin@0 {
- allwinner,pins = "PA02";
- allwinner,function = "gpio_out";
- allwinner,drive = <SUN4I_PINCTRL_10_MA>;
- allwinner,pull = <SUN4I_PINCTRL_NO_PULL>;
+ pins = "PA02";
+ function = "gpio_out";
};
};
regulator-always-on;
regulator-min-microvolt = <3300000>;
regulator-max-microvolt = <3300000>;
- regulator-name = "vcc-wifi";
+ regulator-name = "vcc-wifi1";
+};
+
+®_ldo4 {
+ regulator-always-on;
+ regulator-min-microvolt = <3300000>;
+ regulator-max-microvolt = <3300000>;
+ regulator-name = "vcc-wifi2";
};
®_usb1_vbus {
status = "okay";
};
-&usb1_vbus_pin_a {
- allwinner,pins = "PG12";
-};
-
&usbphy {
usb1_vbus-supply = <®_usb1_vbus>;
status = "okay";