Merge tag 'u-boot-imx-20191105' of https://gitlab.denx.de/u-boot/custodians/u-boot-imx

[oweals/u-boot.git] / arch / arm / dts / sun5i-a10s-r7-tv-dongle.dts

diff --git a/arch/arm/dts/sun5i-a10s-r7-tv-dongle.dts b/arch/arm/dts/sun5i-a10s-r7-tv-dongle.dts
index 9980969d09862b10cb0261ab8660042b654487c7..034853d1c08f5c95fe0cca17389f68aa03b71915 100644 (file)
--- a/arch/arm/dts/sun5i-a10s-r7-tv-dongle.dts
+++ b/arch/arm/dts/sun5i-a10s-r7-tv-dongle.dts
@@ -16,11 +16,6 @@
  *     MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
  *     GNU General Public License for more details.
  *
- *     You should have received a copy of the GNU General Public
- *     License along with this file; if not, write to the Free
- *     Software Foundation, Inc., 51 Franklin St, Fifth Floor, Boston,
- *     MA 02110-1301 USA
- *
  * Or, alternatively,
  *
  *  b) Permission is hereby granted, free of charge, to any person
@@ -50,7 +45,6 @@
 #include "sunxi-common-regulators.dtsi"
 
 #include <dt-bindings/gpio/gpio.h>
-#include <dt-bindings/pinctrl/sun4i-a10.h>
 
 / {
        model = "R7 A10s hdmi tv-stick";
@@ -86,8 +80,7 @@
        pinctrl-0 = <&mmc0_pins_a>, <&mmc0_cd_pin_r7>;
        vmmc-supply = <&reg_vcc3v3>;
        bus-width = <4>;
-       cd-gpios = <&pio 6 1 GPIO_ACTIVE_HIGH>; /* PG1 */
-       cd-inverted;
+       cd-gpios = <&pio 6 1 GPIO_ACTIVE_LOW>; /* PG1 */
        status = "okay";
 };
 
@@ -106,24 +99,20 @@
 
 &pio {
        mmc0_cd_pin_r7: mmc0_cd_pin@0 {
-               allwinner,pins = "PG1";
-               allwinner,function = "gpio_in";
-               allwinner,drive = <SUN4I_PINCTRL_10_MA>;
-               allwinner,pull = <SUN4I_PINCTRL_PULL_UP>;
+               pins = "PG1";
+               function = "gpio_in";
+               bias-pull-up;
        };
 
        led_pins_r7: led_pins@0 {
-               allwinner,pins = "PB2";
-               allwinner,function = "gpio_out";
-               allwinner,drive = <SUN4I_PINCTRL_20_MA>;
-               allwinner,pull = <SUN4I_PINCTRL_NO_PULL>;
+               pins = "PB2";
+               function = "gpio_out";
+               drive-strength = <20>;
        };
 
        usb1_vbus_pin_r7: usb1_vbus_pin@0 {
-               allwinner,pins = "PG13";
-               allwinner,function = "gpio_out";
-               allwinner,drive = <SUN4I_PINCTRL_10_MA>;
-               allwinner,pull = <SUN4I_PINCTRL_NO_PULL>;
+               pins = "PG13";
+               function = "gpio_out";
        };
 };