imx8: Replace SC_R_LAST with SC_R_NONE in DTB

[oweals/u-boot.git] / arch / arm / dts / sun5i-a10s-mk802.dts

diff --git a/arch/arm/dts/sun5i-a10s-mk802.dts b/arch/arm/dts/sun5i-a10s-mk802.dts
index 46ff9407826df08827e09e6c69846f914017b1ba..dd7fd5c3d76f19cda44da9c5b2a3e730dcccd2ad 100644 (file)
--- a/arch/arm/dts/sun5i-a10s-mk802.dts
+++ b/arch/arm/dts/sun5i-a10s-mk802.dts
@@ -73,13 +73,35 @@
        status = "okay";
 };
 
+&i2c0 {
+       pinctrl-names = "default";
+       pinctrl-0 = <&i2c0_pins_a>;
+       status = "okay";
+
+       axp152: pmic@30 {
+               compatible = "x-powers,axp152";
+               reg = <0x30>;
+               interrupts = <0>;
+               interrupt-controller;
+               #interrupt-cells = <1>;
+       };
+};
+
 &mmc0 {
        pinctrl-names = "default";
        pinctrl-0 = <&mmc0_pins_a>, <&mmc0_cd_pin_mk802>;
        vmmc-supply = <&reg_vcc3v3>;
        bus-width = <4>;
-       cd-gpios = <&pio 6 1 GPIO_ACTIVE_HIGH>; /* PG1 */
-       cd-inverted;
+       cd-gpios = <&pio 6 1 GPIO_ACTIVE_LOW>; /* PG1 */
+       status = "okay";
+};
+
+&mmc1 {
+       pinctrl-names = "default";
+       pinctrl-0 = <&mmc1_pins_a>;
+       vmmc-supply = <&reg_vcc3v3>;
+       bus-width = <4>;
+       non-removable;
        status = "okay";
 };
 
@@ -87,26 +109,25 @@
        status = "okay";
 };
 
+&otg_sram {
+       status = "okay";
+};
+
 &pio {
        led_pins_mk802: led_pins@0 {
-               allwinner,pins = "PB2";
-               allwinner,function = "gpio_out";
-               allwinner,drive = <SUN4I_PINCTRL_10_MA>;
-               allwinner,pull = <SUN4I_PINCTRL_NO_PULL>;
+               pins = "PB2";
+               function = "gpio_out";
        };
 
        mmc0_cd_pin_mk802: mmc0_cd_pin@0 {
-               allwinner,pins = "PG1";
-               allwinner,function = "gpio_in";
-               allwinner,drive = <SUN4I_PINCTRL_10_MA>;
-               allwinner,pull = <SUN4I_PINCTRL_PULL_UP>;
+               pins = "PG1";
+               function = "gpio_in";
+               bias-pull-up;
        };
 
        usb1_vbus_pin_mk802: usb1_vbus_pin@0 {
-               allwinner,pins = "PB10";
-               allwinner,function = "gpio_out";
-               allwinner,drive = <SUN4I_PINCTRL_10_MA>;
-               allwinner,pull = <SUN4I_PINCTRL_NO_PULL>;
+               pins = "PB10";
+               function = "gpio_out";
        };
 };
 
@@ -122,6 +143,11 @@
        status = "okay";
 };
 
+&usb_otg {
+       dr_mode = "peripheral";
+       status = "okay";
+};
+
 &usbphy {
        usb1_vbus-supply = <&reg_usb1_vbus>;
        status = "okay";