ARM: imx: pico-imx8mq: Add support for Technexion Pico-iMX8MQ

[oweals/u-boot.git] / arch / arm / dts / sun4i-a10-marsboard.dts

diff --git a/arch/arm/dts/sun4i-a10-marsboard.dts b/arch/arm/dts/sun4i-a10-marsboard.dts
index 8e50723dbe02bae14fed5785547dc229dc061d9e..0dbf69576512ba8bbc7720ec838eaba8cb23ba3d 100644 (file)
--- a/arch/arm/dts/sun4i-a10-marsboard.dts
+++ b/arch/arm/dts/sun4i-a10-marsboard.dts
@@ -46,7 +46,6 @@
 #include "sunxi-common-regulators.dtsi"
 
 #include <dt-bindings/gpio/gpio.h>
-#include <dt-bindings/pinctrl/sun4i-a10.h>
 
 / {
        model = "HAOYU Electronics Marsboard A10";
@@ -62,8 +61,6 @@
 
        leds {
                compatible = "gpio-leds";
-               pinctrl-names = "default";
-               pinctrl-0 = <&led_pins_marsboard>;
 
                red1 {
                        label = "marsboard:red1:usr";
@@ -108,27 +105,19 @@
 };
 
 &emac {
-       pinctrl-names = "default";
-       pinctrl-0 = <&emac_pins_a>;
        phy = <&phy1>;
        status = "okay";
 };
 
 &i2c0 {
-       pinctrl-names = "default";
-       pinctrl-0 = <&i2c0_pins_a>;
        status = "okay";
 };
 
 &i2c1 {
-       pinctrl-names = "default";
-       pinctrl-0 = <&i2c1_pins_a>;
        status = "okay";
 };
 
 &i2c2 {
-       pinctrl-names = "default";
-       pinctrl-0 = <&i2c2_pins_a>;
        status = "okay";
 };
 
@@ -141,12 +130,9 @@
 };
 
 &mmc0 {
-       pinctrl-names = "default";
-       pinctrl-0 = <&mmc0_pins_a>, <&mmc0_cd_pin_reference_design>;
        vmmc-supply = <&reg_vcc3v3>;
        bus-width = <4>;
-       cd-gpios = <&pio 7 1 GPIO_ACTIVE_HIGH>; /* PH1 */
-       cd-inverted;
+       cd-gpios = <&pio 7 1 GPIO_ACTIVE_LOW>; /* PH1 */
        status = "okay";
 };
 
@@ -163,18 +149,10 @@
 };
 
 &pio {
-       led_pins_marsboard: led_pins@0 {
-               allwinner,pins = "PB5", "PB6", "PB7", "PB8";
-               allwinner,function = "gpio_out";
-               allwinner,drive = <SUN4I_PINCTRL_10_MA>;
-               allwinner,pull = <SUN4I_PINCTRL_NO_PULL>;
-       };
-
-       usb0_id_detect_pin: usb0_id_detect_pin@0 {
-               allwinner,pins = "PH4";
-               allwinner,function = "gpio_in";
-               allwinner,drive = <SUN4I_PINCTRL_10_MA>;
-               allwinner,pull = <SUN4I_PINCTRL_PULL_UP>;
+       usb0_id_detect_pin: usb0-id-detect-pin {
+               pins = "PH4";
+               function = "gpio_in";
+               bias-pull-up;
        };
 };
 
@@ -188,14 +166,14 @@
 
 &spi0 {
        pinctrl-names = "default";
-       pinctrl-0 = <&spi0_pins_a>,
-                   <&spi0_cs0_pins_a>;
+       pinctrl-0 = <&spi0_pi_pins>,
+                   <&spi0_cs0_pi_pin>;
        status = "okay";
 };
 
 &uart0 {
        pinctrl-names = "default";
-       pinctrl-0 = <&uart0_pins_a>;
+       pinctrl-0 = <&uart0_pb_pins>;
        status = "okay";
 };