Merge https://gitlab.denx.de/u-boot/custodians/u-boot-clk

[oweals/u-boot.git] / arch / arm / dts / sun4i-a10-jesurun-q5.dts

diff --git a/arch/arm/dts/sun4i-a10-jesurun-q5.dts b/arch/arm/dts/sun4i-a10-jesurun-q5.dts
index 1b0452fea273bfddaead4d5fb1f44751e691ea18..247fa27ef7178aa9390ca70c4df27524be91e60b 100644 (file)
--- a/arch/arm/dts/sun4i-a10-jesurun-q5.dts
+++ b/arch/arm/dts/sun4i-a10-jesurun-q5.dts
@@ -18,11 +18,6 @@
  *     MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
  *     GNU General Public License for more details.
  *
- *     You should have received a copy of the GNU General Public
- *     License along with this file; if not, write to the Free
- *     Software Foundation, Inc., 51 Franklin St, Fifth Floor, Boston,
- *     MA 02110-1301 USA
- *
  * Or, alternatively,
  *
  *  b) Permission is hereby granted, free of charge, to any person
@@ -52,7 +47,6 @@
 #include "sunxi-common-regulators.dtsi"
 
 #include <dt-bindings/gpio/gpio.h>
-#include <dt-bindings/pinctrl/sun4i-a10.h>
 
 / {
        model = "Jesurun Q5";
@@ -68,8 +62,6 @@
 
        leds {
                compatible = "gpio-leds";
-               pinctrl-names = "default";
-               pinctrl-0 = <&led_pins_q5>;
 
                green {
                        label = "q5:green:usr";
@@ -80,11 +72,10 @@
 
        reg_emac_3v3: emac-3v3 {
                compatible = "regulator-fixed";
-               pinctrl-names = "default";
-               pinctrl-0 = <&emac_power_pin_q5>;
                regulator-name = "emac-3v3";
                regulator-min-microvolt = <3300000>;
                regulator-max-microvolt = <3300000>;
+               startup-delay-us = <20000>;
                enable-active-high;
                gpio = <&pio 7 19 GPIO_ACTIVE_HIGH>;   /* PH19 */
        };
@@ -103,15 +94,15 @@
 };
 
 &emac {
-       pinctrl-names = "default";
-       pinctrl-0 = <&emac_pins_a>;
        phy = <&phy1>;
        status = "okay";
 };
 
+&emac_sram {
+       status = "okay";
+};
+
 &i2c0 {
-       pinctrl-names = "default";
-       pinctrl-0 = <&i2c0_pins_a>;
        status = "okay";
 
        axp209: pmic@34 {
@@ -126,7 +117,7 @@
 
 &ir0 {
        pinctrl-names = "default";
-       pinctrl-0 = <&ir0_pins_a>;
+       pinctrl-0 = <&ir0_rx_pins>;
        status = "okay";
 };
 
@@ -140,12 +131,9 @@
 };
 
 &mmc0 {
-       pinctrl-names = "default";
-       pinctrl-0 = <&mmc0_pins_a>, <&mmc0_cd_pin_reference_design>;
        vmmc-supply = <&reg_vcc3v3>;
        bus-width = <4>;
-       cd-gpios = <&pio 7 1 GPIO_ACTIVE_HIGH>; /* PH1 */
-       cd-inverted;
+       cd-gpios = <&pio 7 1 GPIO_ACTIVE_LOW>; /* PH1 */
        status = "okay";
 };
 
@@ -157,20 +145,13 @@
        status = "okay";
 };
 
-&pio {
-       emac_power_pin_q5: emac_power_pin@0 {
-               allwinner,pins = "PH19";
-               allwinner,function = "gpio_out";
-               allwinner,drive = <SUN4I_PINCTRL_10_MA>;
-               allwinner,pull = <SUN4I_PINCTRL_NO_PULL>;
-       };
+&otg_sram {
+       status = "okay";
+};
 
-       led_pins_q5: led_pins@0 {
-               allwinner,pins = "PH20";
-               allwinner,function = "gpio_out";
-               allwinner,drive = <SUN4I_PINCTRL_10_MA>;
-               allwinner,pull = <SUN4I_PINCTRL_NO_PULL>;
-       };
+&reg_usb0_vbus {
+       regulator-boot-on;
+       status = "okay";
 };
 
 &reg_usb1_vbus {
@@ -183,11 +164,17 @@
 
 &uart0 {
        pinctrl-names = "default";
-       pinctrl-0 = <&uart0_pins_a>;
+       pinctrl-0 = <&uart0_pb_pins>;
+       status = "okay";
+};
+
+&usb_otg {
+       dr_mode = "host";
        status = "okay";
 };
 
 &usbphy {
+       usb0_vbus-supply = <&reg_usb0_vbus>;
        usb1_vbus-supply = <&reg_usb1_vbus>;
        usb2_vbus-supply = <&reg_usb2_vbus>;
        status = "okay";