Merge tag 'u-boot-imx-20191009' of https://gitlab.denx.de/u-boot/custodians/u-boot-imx

[oweals/u-boot.git] / arch / arm / dts / sun4i-a10-itead-iteaduino-plus.dts

diff --git a/arch/arm/dts/sun4i-a10-itead-iteaduino-plus.dts b/arch/arm/dts/sun4i-a10-itead-iteaduino-plus.dts
index 985e15503378f818299eed0110f1678fa2c016cc..80ecd78247ac4466a1ad4135c85fa70275c3a98e 100644 (file)
--- a/arch/arm/dts/sun4i-a10-itead-iteaduino-plus.dts
+++ b/arch/arm/dts/sun4i-a10-itead-iteaduino-plus.dts
@@ -1,5 +1,6 @@
 /*
  * Copyright 2015 Josef Gajdusek <atx@atx.name>
+ * Copyright 2015 - Marcus Cooper <codekipper@gmail.com>
  *
  * This file is dual-licensed: you can use it either under the terms
  * of the GPL or the X11 license, at your option. Note that this dual
@@ -42,22 +43,11 @@
 
 /dts-v1/;
 #include "sun4i-a10.dtsi"
-#include "sunxi-common-regulators.dtsi"
-
-#include <dt-bindings/gpio/gpio.h>
-#include <dt-bindings/pinctrl/sun4i-a10.h>
+#include "sunxi-itead-core-common.dtsi"
 
 / {
        model = "Iteaduino Plus A10";
        compatible = "itead,iteaduino-plus-a10", "allwinner,sun4i-a10";
-
-       aliases {
-               serial0 = &uart0;
-       };
-
-       chosen {
-               stdout-path = "serial0:115200n8";
-       };
 };
 
 &ahci {
@@ -65,21 +55,9 @@
        status = "okay";
 };
 
-&cpu0 {
-       cpu-supply = <&reg_dcdc2>;
-};
-
-&ehci0 {
-       status = "okay";
-};
-
-&ehci1 {
-       status = "okay";
-};
-
 &emac {
        pinctrl-names = "default";
-       pinctrl-0 = <&emac_pins_a>;
+       pinctrl-0 = <&emac_pins>;
        phy = <&phy1>;
        status = "okay";
 };
@@ -90,30 +68,28 @@
 
 &i2c0 {
        pinctrl-names = "default";
-       pinctrl-0 = <&i2c0_pins_a>;
-       status = "okay";
+       pinctrl-0 = <&i2c0_pins>;
 
        axp209: pmic@34 {
-               reg = <0x34>;
                interrupts = <0>;
        };
 };
 
 &i2c1 {
        pinctrl-names = "default";
-       pinctrl-0 = <&i2c1_pins_a>;
+       pinctrl-0 = <&i2c1_pins>;
        status = "okay";
 };
 
 &i2c2 {
        pinctrl-names = "default";
-       pinctrl-0 = <&i2c2_pins_a>;
+       pinctrl-0 = <&i2c2_pins>;
        status = "okay";
 };
 
 &ir0 {
        pinctrl-names = "default";
-       pinctrl-0 = <&ir0_rx_pins_a>;
+       pinctrl-0 = <&ir0_rx_pins>;
        status = "okay";
 };
 
@@ -127,19 +103,10 @@
 
 &mmc0 {
        pinctrl-names = "default";
-       pinctrl-0 = <&mmc0_pins_a>, <&mmc0_cd_pin_reference_design>;
+       pinctrl-0 = <&mmc0_pins>;
        vmmc-supply = <&reg_vcc3v3>;
        bus-width = <4>;
-       cd-gpios = <&pio 7 1 GPIO_ACTIVE_HIGH>; /* PH1 */
-       cd-inverted;
-       status = "okay";
-};
-
-&ohci0 {
-       status = "okay";
-};
-
-&ohci1 {
+       cd-gpios = <&pio 7 1 GPIO_ACTIVE_LOW>; /* PH1 */
        status = "okay";
 };
 
@@ -147,56 +114,13 @@
        status = "okay";
 };
 
-#include "axp209.dtsi"
-
-&reg_dcdc2 {
-       regulator-always-on;
-       regulator-min-microvolt = <1000000>;
-       regulator-max-microvolt = <1450000>;
-       regulator-name = "vdd-cpu";
-};
-
-&reg_dcdc3 {
-       regulator-always-on;
-       regulator-min-microvolt = <1000000>;
-       regulator-max-microvolt = <1400000>;
-       regulator-name = "vdd-int-dll";
-};
-
-&reg_ldo1 {
-       regulator-name = "vdd-rtc";
-};
-
-&reg_ldo2 {
-       regulator-always-on;
-       regulator-min-microvolt = <3000000>;
-       regulator-max-microvolt = <3000000>;
-       regulator-name = "avcc";
-};
-
-&reg_usb1_vbus {
-       status = "okay";
-};
-
-&reg_usb2_vbus {
-       status = "okay";
-};
-
 &spi0 {
        pinctrl-names = "default";
-       pinctrl-0 = <&spi0_pins_a>,
-                   <&spi0_cs0_pins_a>;
+       pinctrl-0 = <&spi0_pi_pins>,
+                   <&spi0_cs0_pi_pin>;
        status = "okay";
 };
 
 &uart0 {
-       pinctrl-names = "default";
-       pinctrl-0 = <&uart0_pins_a>;
-       status = "okay";
-};
-
-&usbphy {
-       usb1_vbus-supply = <&reg_usb1_vbus>;
-       usb2_vbus-supply = <&reg_usb2_vbus>;
-       status = "okay";
+       pinctrl-0 = <&uart0_pb_pins>;
 };