Merge branch 'master' of git://git.denx.de/u-boot

[oweals/u-boot.git] / arch / arm / dts / sun4i-a10-inet1.dts

diff --git a/arch/arm/dts/sun4i-a10-inet1.dts b/arch/arm/dts/sun4i-a10-inet1.dts
index 487ce63519dcf9f0a79cc0df11a13a121cf715ee..26d0c1d6a02b4454ff34b214562732a86e59b8d7 100644 (file)
--- a/arch/arm/dts/sun4i-a10-inet1.dts
+++ b/arch/arm/dts/sun4i-a10-inet1.dts
@@ -46,7 +46,7 @@
 #include <dt-bindings/gpio/gpio.h>
 #include <dt-bindings/input/input.h>
 #include <dt-bindings/interrupt-controller/irq.h>
-#include <dt-bindings/pinctrl/sun4i-a10.h>
+#include <dt-bindings/pwm/pwm.h>
 
 / {
        model = "iNet-1";
@@ -56,11 +56,23 @@
                serial0 = &uart0;
        };
 
+       backlight: backlight {
+               compatible = "pwm-backlight";
+               pwms = <&pwm 0 50000 PWM_POLARITY_INVERTED>;
+               brightness-levels = <0 10 20 30 40 50 60 70 80 90 100>;
+               default-brightness-level = <8>;
+               enable-gpios = <&pio 7 7 GPIO_ACTIVE_HIGH>; /* PH7 */
+       };
+
        chosen {
                stdout-path = "serial0:115200n8";
        };
 };
 
+&codec {
+       status = "okay";
+};
+
 &cpu0 {
        cpu-supply = <&reg_dcdc2>;
 };
@@ -74,8 +86,6 @@
 };
 
 &i2c0 {
-       pinctrl-names = "default";
-       pinctrl-0 = <&i2c0_pins_a>;
        status = "okay";
 
        axp209: pmic@34 {
@@ -87,8 +97,6 @@
 #include "axp209.dtsi"
 
 &i2c1 {
-       pinctrl-names = "default";
-       pinctrl-0 = <&i2c1_pins_a>;
        status = "okay";
 
        /* Accelerometer */
@@ -101,30 +109,39 @@
 };
 
 &i2c2 {
-       pinctrl-names = "default";
-       pinctrl-0 = <&i2c2_pins_a>;
        status = "okay";
+
+       ft5x: touchscreen@38 {
+               compatible = "edt,edt-ft5406";
+               reg = <0x38>;
+               interrupt-parent = <&pio>;
+               interrupts = <7 21 IRQ_TYPE_EDGE_FALLING>;
+               wake-gpios = <&pio 1 13 GPIO_ACTIVE_HIGH>; /* PB13 */
+               touchscreen-size-x = <600>;
+               touchscreen-size-y = <1024>;
+               touchscreen-swapped-x-y;
+       };
 };
 
 &lradc {
        vref-supply = <&reg_ldo2>;
        status = "okay";
 
-       button@200 {
+       button-200 {
                label = "Volume Up";
                linux,code = <KEY_VOLUMEUP>;
                channel = <0>;
                voltage = <200000>;
        };
 
-       button@1000 {
+       button-1000 {
                label = "Volume Down";
                linux,code = <KEY_VOLUMEDOWN>;
                channel = <0>;
                voltage = <1000000>;
        };
 
-       button@1200 {
+       button-1200 {
                label = "Home";
                linux,code = <KEY_HOMEPAGE>;
                channel = <0>;
@@ -133,12 +150,9 @@
 };
 
 &mmc0 {
-       pinctrl-names = "default";
-       pinctrl-0 = <&mmc0_pins_a>, <&mmc0_cd_pin_reference_design>;
        vmmc-supply = <&reg_vcc3v3>;
        bus-width = <4>;
-       cd-gpios = <&pio 7 1 GPIO_ACTIVE_HIGH>; /* PH1 */
-       cd-inverted;
+       cd-gpios = <&pio 7 1 GPIO_ACTIVE_LOW>; /* PH1 */
        status = "okay";
 };
 
@@ -151,21 +165,25 @@
 };
 
 &pio {
-       usb0_id_detect_pin: usb0_id_detect_pin@0 {
-               allwinner,pins = "PH4";
-               allwinner,function = "gpio_in";
-               allwinner,drive = <SUN4I_PINCTRL_10_MA>;
-               allwinner,pull = <SUN4I_PINCTRL_PULL_UP>;
+       usb0_id_detect_pin: usb0-id-detect-pin {
+               pins = "PH4";
+               function = "gpio_in";
+               bias-pull-up;
        };
 
-       usb0_vbus_detect_pin: usb0_vbus_detect_pin@0 {
-               allwinner,pins = "PH5";
-               allwinner,function = "gpio_in";
-               allwinner,drive = <SUN4I_PINCTRL_10_MA>;
-               allwinner,pull = <SUN4I_PINCTRL_PULL_DOWN>;
+       usb0_vbus_detect_pin: usb0-vbus-detect-pin {
+               pins = "PH5";
+               function = "gpio_in";
+               bias-pull-down;
        };
 };
 
+&pwm {
+       pinctrl-names = "default";
+       pinctrl-0 = <&pwm0_pin>;
+       status = "okay";
+};
+
 &reg_dcdc2 {
        regulator-always-on;
        regulator-min-microvolt = <1000000>;
@@ -205,7 +223,7 @@
 
 &uart0 {
        pinctrl-names = "default";
-       pinctrl-0 = <&uart0_pins_a>;
+       pinctrl-0 = <&uart0_pb_pins>;
        status = "okay";
 };