ARM: dts: rmobile: Add soc label to Gen3

[oweals/u-boot.git] / arch / arm / dts / sun4i-a10-hackberry.dts

diff --git a/arch/arm/dts/sun4i-a10-hackberry.dts b/arch/arm/dts/sun4i-a10-hackberry.dts
index f4437883fba7a5aa0a99f613eed6991309b1a02b..cc988ccd5ca753157887f70a141b55679bbb24f8 100644 (file)
--- a/arch/arm/dts/sun4i-a10-hackberry.dts
+++ b/arch/arm/dts/sun4i-a10-hackberry.dts
@@ -18,11 +18,6 @@
  *     MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
  *     GNU General Public License for more details.
  *
- *     You should have received a copy of the GNU General Public
- *     License along with this file; if not, write to the Free
- *     Software Foundation, Inc., 51 Franklin St, Fifth Floor, Boston,
- *     MA 02110-1301 USA
- *
  * Or, alternatively,
  *
  *  b) Permission is hereby granted, free of charge, to any person
@@ -52,7 +47,6 @@
 #include "sunxi-common-regulators.dtsi"
 
 #include <dt-bindings/gpio/gpio.h>
-#include <dt-bindings/pinctrl/sun4i-a10.h>
 
 / {
        model = "Miniand Hackberry";
@@ -71,6 +65,7 @@
                regulator-name = "emac-3v3";
                regulator-min-microvolt = <3300000>;
                regulator-max-microvolt = <3300000>;
+               startup-delay-us = <20000>;
                enable-active-high;
                gpio = <&pio 7 19 GPIO_ACTIVE_HIGH>;
        };
@@ -85,15 +80,17 @@
 };
 
 &emac {
-       pinctrl-names = "default";
-       pinctrl-0 = <&emac_pins_a>;
        phy = <&phy0>;
        status = "okay";
 };
 
+&emac_sram {
+       status = "okay";
+};
+
 &ir0 {
        pinctrl-names = "default";
-       pinctrl-0 = <&ir0_pins_a>;
+       pinctrl-0 = <&ir0_rx_pins>;
        status = "okay";
 };
 
@@ -107,12 +104,9 @@
 };
 
 &mmc0 {
-       pinctrl-names = "default";
-       pinctrl-0 = <&mmc0_pins_a>, <&mmc0_cd_pin_reference_design>;
        vmmc-supply = <&reg_vcc3v3>;
        bus-width = <4>;
-       cd-gpios = <&pio 7 1 GPIO_ACTIVE_HIGH>; /* PH1 */
-       cd-inverted;
+       cd-gpios = <&pio 7 1 GPIO_ACTIVE_LOW>; /* PH1 */
        status = "okay";
 };
 
@@ -124,31 +118,11 @@
        status = "okay";
 };
 
-&pio {
-       pinctrl-names = "default";
-       pinctrl-0 = <&hackberry_hogs>;
-
-       hackberry_hogs: hogs@0 {
-               allwinner,pins = "PH19";
-               allwinner,function = "gpio_out";
-               allwinner,drive = <SUN4I_PINCTRL_10_MA>;
-               allwinner,pull = <SUN4I_PINCTRL_NO_PULL>;
-       };
-
-       usb2_vbus_pin_hackberry: usb2_vbus_pin@0 {
-               allwinner,pins = "PH12";
-               allwinner,function = "gpio_out";
-               allwinner,drive = <SUN4I_PINCTRL_10_MA>;
-               allwinner,pull = <SUN4I_PINCTRL_NO_PULL>;
-       };
-};
-
 &reg_usb1_vbus {
        status = "okay";
 };
 
 &reg_usb2_vbus {
-       pinctrl-0 = <&usb2_vbus_pin_hackberry>;
        gpio = <&pio 7 12 GPIO_ACTIVE_HIGH>;
        status = "okay";
 };
@@ -161,6 +135,6 @@
 
 &uart0 {
        pinctrl-names = "default";
-       pinctrl-0 = <&uart0_pins_a>;
+       pinctrl-0 = <&uart0_pb_pins>;
        status = "okay";
 };