ARM: dts: sama5d2: Add uart4 definition

[oweals/u-boot.git] / arch / arm / dts / sun4i-a10-dserve-dsrv9703c.dts

diff --git a/arch/arm/dts/sun4i-a10-dserve-dsrv9703c.dts b/arch/arm/dts/sun4i-a10-dserve-dsrv9703c.dts
index 893497e397daca56bf2e2a86630137854743b320..896e27a08727827aad3b73f12ccc0c18993f7404 100644 (file)
--- a/arch/arm/dts/sun4i-a10-dserve-dsrv9703c.dts
+++ b/arch/arm/dts/sun4i-a10-dserve-dsrv9703c.dts
@@ -46,7 +46,6 @@
 #include <dt-bindings/gpio/gpio.h>
 #include <dt-bindings/input/input.h>
 #include <dt-bindings/interrupt-controller/irq.h>
-#include <dt-bindings/pinctrl/sun4i-a10.h>
 #include <dt-bindings/pwm/pwm.h>
 
 / {
@@ -59,8 +58,6 @@
 
        backlight: backlight {
                compatible = "pwm-backlight";
-               pinctrl-names = "default";
-               pinctrl-0 = <&bl_en_pin_dsrv9703c>;
                pwms = <&pwm 0 50000 PWM_POLARITY_INVERTED>;
                brightness-levels = <0 10 20 30 40 50 60 70 80 90 100>;
                default-brightness-level = <8>;
@@ -78,10 +75,8 @@
                max-microvolt = <3000000>;
        };
 
-       reg_motor: reg_motor {
+       reg_motor: reg-motor {
                compatible = "regulator-fixed";
-               pinctrl-names = "default";
-               pinctrl-0 = <&motor_pins>;
                regulator-name = "vcc-motor";
                regulator-min-microvolt = <3000000>;
                regulator-max-microvolt = <3000000>;
@@ -91,8 +86,6 @@
 };
 
 &codec {
-       pinctrl-names = "default";
-       pinctrl-0 = <&codec_pa_pin>;
        allwinner,pa-gpios = <&pio 7 15 GPIO_ACTIVE_HIGH>; /* PH15 */
        status = "okay";
 };
@@ -106,8 +99,6 @@
 };
 
 &i2c0 {
-       pinctrl-names = "default";
-       pinctrl-0 = <&i2c0_pins_a>;
        status = "okay";
 
        axp209: pmic@34 {
@@ -119,15 +110,11 @@
 #include "axp209.dtsi"
 
 &i2c1 {
-       pinctrl-names = "default";
-       pinctrl-0 = <&i2c1_pins_a>;
        /* pull-ups and devices require AXP209 LDO3 */
        status = "failed";
 };
 
 &i2c2 {
-       pinctrl-names = "default";
-       pinctrl-0 = <&i2c2_pins_a>;
        status = "okay";
 
        ft5406ee8: touchscreen@38 {
@@ -135,8 +122,6 @@
                reg = <0x38>;
                interrupt-parent = <&pio>;
                interrupts = <7 21 IRQ_TYPE_EDGE_FALLING>;
-               pinctrl-names = "default";
-               pinctrl-0 = <&touchscreen_pins>;
                reset-gpios = <&pio 1 13 GPIO_ACTIVE_LOW>;
                touchscreen-size-x = <1024>;
                touchscreen-size-y = <768>;
@@ -147,14 +132,14 @@
        vref-supply = <&reg_ldo2>;
        status = "okay";
 
-       button@400 {
+       button-400 {
                label = "Volume Down";
                linux,code = <KEY_VOLUMEDOWN>;
                channel = <0>;
                voltage = <400000>;
        };
 
-       button@800 {
+       button-800 {
                label = "Volume Up";
                linux,code = <KEY_VOLUMEUP>;
                channel = <0>;
@@ -163,12 +148,9 @@
 };
 
 &mmc0 {
-       pinctrl-names = "default";
-       pinctrl-0 = <&mmc0_pins_a>, <&mmc0_cd_pin_reference_design>;
        vmmc-supply = <&reg_vcc3v3>;
        bus-width = <4>;
-       cd-gpios = <&pio 7 1 GPIO_ACTIVE_HIGH>; /* PH1 */
-       cd-inverted;
+       cd-gpios = <&pio 7 1 GPIO_ACTIVE_LOW>; /* PH1 */
        status = "okay";
 };
 
@@ -177,52 +159,22 @@
 };
 
 &pio {
-       bl_en_pin_dsrv9703c: bl_en_pin@0 {
-               allwinner,pins = "PH7";
-               allwinner,function = "gpio_out";
-               allwinner,drive = <SUN4I_PINCTRL_10_MA>;
-               allwinner,pull = <SUN4I_PINCTRL_NO_PULL>;
-       };
-
-       codec_pa_pin: codec_pa_pin@0 {
-               allwinner,pins = "PH15";
-               allwinner,function = "gpio_out";
-               allwinner,drive = <SUN4I_PINCTRL_10_MA>;
-               allwinner,pull = <SUN4I_PINCTRL_NO_PULL>;
-       };
-
-       motor_pins: motor_pins@0 {
-               allwinner,pins = "PB3";
-               allwinner,function = "gpio_out";
-               allwinner,drive = <SUN4I_PINCTRL_10_MA>;
-               allwinner,pull = <SUN4I_PINCTRL_NO_PULL>;
-       };
-
-       touchscreen_pins: touchscreen_pins@0 {
-               allwinner,pins = "PB13";
-               allwinner,function = "gpio_out";
-               allwinner,drive = <SUN4I_PINCTRL_10_MA>;
-               allwinner,pull = <SUN4I_PINCTRL_NO_PULL>;
-       };
-
-       usb0_id_detect_pin: usb0_id_detect_pin@0 {
-               allwinner,pins = "PH4";
-               allwinner,function = "gpio_in";
-               allwinner,drive = <SUN4I_PINCTRL_10_MA>;
-               allwinner,pull = <SUN4I_PINCTRL_PULL_UP>;
+       usb0_id_detect_pin: usb0-id-detect-pin {
+               pins = "PH4";
+               function = "gpio_in";
+               bias-pull-up;
        };
 
-       usb0_vbus_detect_pin: usb0_vbus_detect_pin@0 {
-               allwinner,pins = "PH5";
-               allwinner,function = "gpio_in";
-               allwinner,drive = <SUN4I_PINCTRL_10_MA>;
-               allwinner,pull = <SUN4I_PINCTRL_PULL_DOWN>;
+       usb0_vbus_detect_pin: usb0-vbus-detect-pin {
+               pins = "PH5";
+               function = "gpio_in";
+               bias-pull-down;
        };
 };
 
 &pwm {
        pinctrl-names = "default";
-       pinctrl-0 = <&pwm0_pins_a>;
+       pinctrl-0 = <&pwm0_pin>;
        status = "okay";
 };
 
@@ -261,7 +213,7 @@
 
 &uart0 {
        pinctrl-names = "default";
-       pinctrl-0 = <&uart0_pins_a>;
+       pinctrl-0 = <&uart0_pb_pins>;
        status = "okay";
 };