Merge branch 'master' of git://git.denx.de/u-boot-usb

[oweals/u-boot.git] / arch / arm / dts / sun4i-a10-chuwi-v7-cw0825.dts

diff --git a/arch/arm/dts/sun4i-a10-chuwi-v7-cw0825.dts b/arch/arm/dts/sun4i-a10-chuwi-v7-cw0825.dts
index 35fb163827decf05c89c3dc414e25b5a96f86420..cf7b392dff31477324e816f27e85365a98484c1c 100644 (file)
--- a/arch/arm/dts/sun4i-a10-chuwi-v7-cw0825.dts
+++ b/arch/arm/dts/sun4i-a10-chuwi-v7-cw0825.dts
@@ -16,11 +16,6 @@
  *     MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
  *     GNU General Public License for more details.
  *
- *     You should have received a copy of the GNU General Public
- *     License along with this file; if not, write to the Free
- *     Software Foundation, Inc., 51 Franklin St, Fifth Floor, Boston,
- *     MA 02110-1301 USA
- *
  * Or, alternatively,
  *
  *  b) Permission is hereby granted, free of charge, to any person
@@ -50,6 +45,7 @@
 #include "sunxi-common-regulators.dtsi"
 #include <dt-bindings/gpio/gpio.h>
 #include <dt-bindings/input/input.h>
+#include <dt-bindings/interrupt-controller/irq.h>
 
 / {
        model = "Chuwi V7 CW0825";
@@ -69,8 +65,6 @@
 };
 
 &i2c0 {
-       pinctrl-names = "default";
-       pinctrl-0 = <&i2c0_pins_a>;
        status = "okay";
 
        axp209: pmic@34 {
@@ -83,25 +77,42 @@
        };
 };
 
+&i2c1 {
+       status = "okay";
+};
+
+&i2c2 {
+       status = "okay";
+
+       ft5306de4: touchscreen@38 {
+               compatible = "edt,edt-ft5406";
+               reg = <0x38>;
+               interrupt-parent = <&pio>;
+               interrupts = <7 21 IRQ_TYPE_EDGE_FALLING>;
+               touchscreen-size-x = <1024>;
+               touchscreen-size-y = <768>;
+       };
+};
+
 &lradc {
        vref-supply = <&reg_vcc3v0>;
        status = "okay";
 
-       button@800 {
+       button-800 {
                label = "Volume Up";
                linux,code = <KEY_VOLUMEUP>;
                channel = <0>;
                voltage = <800000>;
        };
 
-       button@1000 {
+       button-1000 {
                label = "Volume Down";
                linux,code = <KEY_VOLUMEDOWN>;
                channel = <0>;
                voltage = <1000000>;
        };
 
-       button@1200 {
+       button-1200 {
                label = "Back";
                linux,code = <KEY_BACK>;
                channel = <0>;
@@ -110,12 +121,31 @@
 };
 
 &mmc0 {
-       pinctrl-names = "default";
-       pinctrl-0 = <&mmc0_pins_a>, <&mmc0_cd_pin_reference_design>;
        vmmc-supply = <&reg_vcc3v3>;
        bus-width = <4>;
-       cd-gpios = <&pio 7 1 GPIO_ACTIVE_HIGH>; /* PH1 */
-       cd-inverted;
+       cd-gpios = <&pio 7 1 GPIO_ACTIVE_LOW>; /* PH1 */
+       status = "okay";
+};
+
+&otg_sram {
+       status = "okay";
+};
+
+&pio {
+       usb0_id_detect_pin: usb0-id-detect-pin {
+               pins = "PH4";
+               function = "gpio_in";
+               bias-pull-up;
+       };
+
+       usb0_vbus_detect_pin: usb0-vbus-detect-pin {
+               pins = "PH5";
+               function = "gpio_in";
+               bias-pull-down;
+       };
+};
+
+&reg_usb0_vbus {
        status = "okay";
 };
 
@@ -125,11 +155,21 @@
 
 &uart0 {
        pinctrl-names = "default";
-       pinctrl-0 = <&uart0_pins_a>;
+       pinctrl-0 = <&uart0_pb_pins>;
+       status = "okay";
+};
+
+&usb_otg {
+       dr_mode = "otg";
        status = "okay";
 };
 
 &usbphy {
+       pinctrl-names = "default";
+       pinctrl-0 = <&usb0_id_detect_pin>, <&usb0_vbus_detect_pin>;
+       usb0_id_det-gpio = <&pio 7 4 GPIO_ACTIVE_HIGH>; /* PH4 */
+       usb0_vbus_det-gpio = <&pio 7 5 GPIO_ACTIVE_HIGH>; /* PH5 */
+       usb0_vbus-supply = <&reg_usb0_vbus>;
        usb2_vbus-supply = <&reg_usb2_vbus>;
        status = "okay";
 };