ARM: dts: sama5d2: Add uart4 definition

[oweals/u-boot.git] / arch / arm / dts / sun4i-a10-ba10-tvbox.dts

diff --git a/arch/arm/dts/sun4i-a10-ba10-tvbox.dts b/arch/arm/dts/sun4i-a10-ba10-tvbox.dts
index f3cb297fd1db3d22c4510aa8d0da8ee3d88d18e2..38a2c413495248024fc8f4e96348dd1e64260d14 100644 (file)
--- a/arch/arm/dts/sun4i-a10-ba10-tvbox.dts
+++ b/arch/arm/dts/sun4i-a10-ba10-tvbox.dts
@@ -68,8 +68,6 @@
 };
 
 &emac {
-       pinctrl-names = "default";
-       pinctrl-0 = <&emac_pins_a>;
        phy = <&phy1>;
        status = "okay";
 };
@@ -79,8 +77,6 @@
 };
 
 &i2c0 {
-       pinctrl-names = "default";
-       pinctrl-0 = <&i2c0_pins_a>;
        status = "okay";
 
        axp209: pmic@34 {
@@ -95,7 +91,7 @@
 
 &ir0 {
        pinctrl-names = "default";
-       pinctrl-0 = <&ir0_rx_pins_a>;
+       pinctrl-0 = <&ir0_rx_pins>;
        status = "okay";
 };
 
@@ -108,12 +104,9 @@
 };
 
 &mmc0 {
-       pinctrl-names = "default";
-       pinctrl-0 = <&mmc0_pins_a>, <&mmc0_cd_pin_reference_design>;
        vmmc-supply = <&reg_vcc3v3>;
        bus-width = <4>;
-       cd-gpios = <&pio 7 1 GPIO_ACTIVE_HIGH>; /* PH1 */
-       cd-inverted;
+       cd-gpios = <&pio 7 1 GPIO_ACTIVE_LOW>; /* PH1 */
        status = "okay";
 };
 
@@ -121,20 +114,10 @@
        status = "okay";
 };
 
-&ohci1 {
-       status = "okay";
-};
-
 &otg_sram {
        status = "okay";
 };
 
-&pio {
-       usb2_vbus_pin_a: usb2_vbus_pin@0 {
-               allwinner,pins = "PH12";
-       };
-};
-
 &reg_usb0_vbus {
        regulator-boot-on;
        status = "okay";
@@ -151,7 +134,7 @@
 
 &uart0 {
        pinctrl-names = "default";
-       pinctrl-0 = <&uart0_pins_a>;
+       pinctrl-0 = <&uart0_pb_pins>;
        status = "okay";
 };