rockchip: rk3328: rock64 - fix gen3 SPL hang

[oweals/u-boot.git] / arch / arm / dts / sun4i-a10-a1000.dts

diff --git a/arch/arm/dts/sun4i-a10-a1000.dts b/arch/arm/dts/sun4i-a10-a1000.dts
index 2630d78d9e0456b58039723151ca26128c6065d4..6c254ec4c85b71faaff83da262ab59d4d3794211 100644 (file)
--- a/arch/arm/dts/sun4i-a10-a1000.dts
+++ b/arch/arm/dts/sun4i-a10-a1000.dts
@@ -47,7 +47,6 @@
 #include "sunxi-common-regulators.dtsi"
 
 #include <dt-bindings/gpio/gpio.h>
-#include <dt-bindings/pinctrl/sun4i-a10.h>
 
 / {
        model = "Mele A1000";
@@ -63,8 +62,6 @@
 
        leds {
                compatible = "gpio-leds";
-               pinctrl-names = "default";
-               pinctrl-0 = <&led_pins_a1000>;
 
                red {
                        label = "a1000:red:usr";
@@ -72,27 +69,53 @@
                };
 
                blue {
-                       label = "a1000:blue:usr";
+                       label = "a1000:blue:pwr";
                        gpios = <&pio 7 20 GPIO_ACTIVE_HIGH>;
+                       default-state = "on";
                };
        };
 
        reg_emac_3v3: emac-3v3 {
                compatible = "regulator-fixed";
-               pinctrl-names = "default";
-               pinctrl-0 = <&emac_power_pin_a1000>;
                regulator-name = "emac-3v3";
                regulator-min-microvolt = <3300000>;
                regulator-max-microvolt = <3300000>;
+               startup-delay-us = <20000>;
                enable-active-high;
                gpio = <&pio 7 15 GPIO_ACTIVE_HIGH>;
        };
+
+       sound {
+               compatible = "simple-audio-card";
+               simple-audio-card,name = "On-board SPDIF";
+
+               simple-audio-card,cpu {
+                       sound-dai = <&spdif>;
+               };
+
+               simple-audio-card,codec {
+                       sound-dai = <&spdif_out>;
+               };
+       };
+
+       spdif_out: spdif-out {
+               #sound-dai-cells = <0>;
+               compatible = "linux,spdif-dit";
+       };
 };
 
 &ahci {
        status = "okay";
 };
 
+&codec {
+       status = "okay";
+};
+
+&cpu0 {
+       cpu-supply = <&reg_dcdc2>;
+};
+
 &ehci0 {
        status = "okay";
 };
@@ -102,8 +125,6 @@
 };
 
 &emac {
-       pinctrl-names = "default";
-       pinctrl-0 = <&emac_pins_a>;
        phy = <&phy1>;
        status = "okay";
 };
@@ -113,8 +134,6 @@
 };
 
 &i2c0 {
-       pinctrl-names = "default";
-       pinctrl-0 = <&i2c0_pins_a>;
        status = "okay";
 
        axp209: pmic@34 {
@@ -129,7 +148,7 @@
 
 &ir0 {
        pinctrl-names = "default";
-       pinctrl-0 = <&ir0_rx_pins_a>;
+       pinctrl-0 = <&ir0_rx_pins>;
        status = "okay";
 };
 
@@ -143,12 +162,9 @@
 };
 
 &mmc0 {
-       pinctrl-names = "default";
-       pinctrl-0 = <&mmc0_pins_a>, <&mmc0_cd_pin_reference_design>;
        vmmc-supply = <&reg_vcc3v3>;
        bus-width = <4>;
-       cd-gpios = <&pio 7 1 GPIO_ACTIVE_HIGH>; /* PH1 */
-       cd-inverted;
+       cd-gpios = <&pio 7 1 GPIO_ACTIVE_LOW>; /* PH1 */
        status = "okay";
 };
 
@@ -160,20 +176,31 @@
        status = "okay";
 };
 
-&pio {
-       emac_power_pin_a1000: emac_power_pin@0 {
-               allwinner,pins = "PH15";
-               allwinner,function = "gpio_out";
-               allwinner,drive = <SUN4I_PINCTRL_10_MA>;
-               allwinner,pull = <SUN4I_PINCTRL_NO_PULL>;
-       };
+#include "axp209.dtsi"
 
-       led_pins_a1000: led_pins@0 {
-               allwinner,pins = "PH10", "PH20";
-               allwinner,function = "gpio_out";
-               allwinner,drive = <SUN4I_PINCTRL_10_MA>;
-               allwinner,pull = <SUN4I_PINCTRL_NO_PULL>;
-       };
+&reg_dcdc2 {
+       regulator-always-on;
+       regulator-min-microvolt = <1000000>;
+       regulator-max-microvolt = <1400000>;
+       regulator-name = "vdd-cpu";
+};
+
+&reg_dcdc3 {
+       regulator-always-on;
+       regulator-min-microvolt = <1000000>;
+       regulator-max-microvolt = <1250000>;
+       regulator-name = "vdd-int-dll";
+};
+
+&reg_ldo1 {
+       regulator-name = "vdd-rtc";
+};
+
+&reg_ldo2 {
+       regulator-always-on;
+       regulator-min-microvolt = <3000000>;
+       regulator-max-microvolt = <3000000>;
+       regulator-name = "avcc";
 };
 
 &reg_usb1_vbus {
@@ -184,9 +211,15 @@
        status = "okay";
 };
 
+&spdif {
+       pinctrl-names = "default";
+       pinctrl-0 = <&spdif_tx_pin>;
+       status = "okay";
+};
+
 &uart0 {
        pinctrl-names = "default";
-       pinctrl-0 = <&uart0_pins_a>;
+       pinctrl-0 = <&uart0_pb_pins>;
        status = "okay";
 };