/dts-v1/;
#include "stm32mp157c.dtsi"
-#include "stm32mp157-pinctrl.dtsi"
+#include "stm32mp157xac-pinctrl.dtsi"
#include <dt-bindings/gpio/gpio.h>
#include <dt-bindings/mfd/st,stpmic1.h>
reg = <0xc0000000 0x20000000>;
};
+ reserved-memory {
+ #address-cells = <1>;
+ #size-cells = <1>;
+ ranges;
+
+ gpu_reserved: gpu@d4000000 {
+ reg = <0xd4000000 0x4000000>;
+ no-map;
+ };
+ };
+
led {
compatible = "gpio-leds";
blue {
};
};
+&cec {
+ pinctrl-names = "default", "sleep";
+ pinctrl-0 = <&cec_pins_b>;
+ pinctrl-1 = <&cec_pins_sleep_b>;
+ status = "okay";
+};
+
ðernet0 {
status = "okay";
pinctrl-0 = <ðernet0_rgmii_pins_a>;
pinctrl-1 = <ðernet0_rgmii_pins_sleep_a>;
pinctrl-names = "default", "sleep";
- phy-mode = "rgmii";
+ phy-mode = "rgmii-id";
max-speed = <1000>;
phy-handle = <&phy0>;
};
};
+&gpu {
+ contiguous-area = <&gpu_reserved>;
+ status = "okay";
+};
+
+&i2c1 {
+ pinctrl-names = "default", "sleep";
+ pinctrl-0 = <&i2c1_pins_a>;
+ pinctrl-1 = <&i2c1_pins_sleep_a>;
+ i2c-scl-rising-time-ns = <100>;
+ i2c-scl-falling-time-ns = <7>;
+ status = "okay";
+ /delete-property/dmas;
+ /delete-property/dma-names;
+
+ hdmi-transmitter@39 {
+ compatible = "sil,sii9022";
+ reg = <0x39>;
+ iovcc-supply = <&v3v3_hdmi>;
+ cvcc12-supply = <&v1v2_hdmi>;
+ reset-gpios = <&gpioa 10 GPIO_ACTIVE_LOW>;
+ interrupts = <1 IRQ_TYPE_EDGE_FALLING>;
+ interrupt-parent = <&gpiog>;
+ pinctrl-names = "default", "sleep";
+ pinctrl-0 = <<dc_pins_a>;
+ pinctrl-1 = <<dc_pins_sleep_a>;
+ status = "okay";
+
+ ports {
+ #address-cells = <1>;
+ #size-cells = <0>;
+
+ port@0 {
+ reg = <0>;
+ sii9022_in: endpoint {
+ remote-endpoint = <<dc_ep0_out>;
+ };
+ };
+ };
+ };
+};
+
&i2c4 {
pinctrl-names = "default";
pinctrl-0 = <&i2c4_pins_a>;
i2c-scl-rising-time-ns = <185>;
i2c-scl-falling-time-ns = <20>;
status = "okay";
+ /* spare dmas for other usage */
/delete-property/dmas;
/delete-property/dma-names;
+ typec: stusb1600@28 {
+ compatible = "st,stusb1600";
+ reg = <0x28>;
+ interrupts = <11 IRQ_TYPE_EDGE_FALLING>;
+ interrupt-parent = <&gpioi>;
+ pinctrl-names = "default";
+ pinctrl-0 = <&stusb1600_pins_a>;
+
+ status = "okay";
+
+ typec_con: connector {
+ compatible = "usb-c-connector";
+ label = "USB-C";
+ power-role = "sink";
+ power-opmode = "default";
+ };
+ };
+
pmic: stpmic@33 {
compatible = "st,stpmic1";
reg = <0x33>;
+ interrupts-extended = <&gpioa 0 IRQ_TYPE_EDGE_FALLING>;
interrupt-controller;
#interrupt-cells = <2>;
status = "okay";
- st,main-control-register = <0x04>;
- st,vin-control-register = <0xc0>;
- st,usb-control-register = <0x20>;
-
regulators {
compatible = "st,stpmic1-regulators";
-
ldo1-supply = <&v3v3>;
ldo3-supply = <&vdd_ddr>;
ldo6-supply = <&v3v3>;
vddcore: buck1 {
regulator-name = "vddcore";
- regulator-min-microvolt = <1200000>;
+ regulator-min-microvolt = <800000>;
regulator-max-microvolt = <1350000>;
regulator-always-on;
regulator-initial-mode = <0>;
regulator-max-microvolt = <1200000>;
regulator-always-on;
interrupts = <IT_CURLIM_LDO6 0>;
-
};
vref_ddr: vref_ddr {
vbus_otg: pwr_sw1 {
regulator-name = "vbus_otg";
interrupts = <IT_OCP_OTG 0>;
- regulator-active-discharge;
};
vbus_sw: pwr_sw2 {
onkey {
compatible = "st,stpmic1-onkey";
- interrupts = <IT_PONKEY_F 0>, <IT_PONKEY_R 1>;
+ interrupts = <IT_PONKEY_F 0>, <IT_PONKEY_R 0>;
interrupt-names = "onkey-falling", "onkey-rising";
+ power-off-time-sec = <10>;
status = "okay";
};
};
};
+&ipcc {
+ status = "okay";
+};
+
&iwdg2 {
timeout-sec = <32>;
status = "okay";
};
+<dc {
+ status = "okay";
+
+ port {
+ #address-cells = <1>;
+ #size-cells = <0>;
+
+ ltdc_ep0_out: endpoint@0 {
+ reg = <0>;
+ remote-endpoint = <&sii9022_in>;
+ };
+ };
+};
+
+&m4_rproc {
+ mboxes = <&ipcc 0>, <&ipcc 1>, <&ipcc 2>;
+ mbox-names = "vq0", "vq1", "shutdown";
+ status = "okay";
+};
+
&pwr {
- pwr-supply = <&vdd>;
+ pwr-regulators {
+ vdd-supply = <&vdd>;
+ vdd_3v3_usbfs-supply = <&vdd_usb>;
+ };
};
&rng1 {
};
&sdmmc1 {
- pinctrl-names = "default";
+ pinctrl-names = "default", "opendrain", "sleep";
pinctrl-0 = <&sdmmc1_b4_pins_a>;
+ pinctrl-1 = <&sdmmc1_b4_od_pins_a>;
+ pinctrl-2 = <&sdmmc1_b4_sleep_pins_a>;
broken-cd;
st,neg-edge;
bus-width = <4>;
status = "okay";
};
+&usbotg_hs {
+ dr_mode = "peripheral";
+ phys = <&usbphyc_port1 0>;
+ phy-names = "usb2-phy";
+ status = "okay";
+};
+
&usbphyc {
- vdd3v3-supply = <&vdd_usb>;
status = "okay";
};
+&usbphyc_port0 {
+ phy-supply = <&vdd_usb>;
+};
+
+&usbphyc_port1 {
+ phy-supply = <&vdd_usb>;
+};
+
&vrefbuf {
regulator-min-microvolt = <2500000>;
regulator-max-microvolt = <2500000>;