*/
#include <dt-bindings/clock/stm32mp1-clksrc.h>
-#include "stm32mp157-u-boot.dtsi"
+#include "stm32mp15-u-boot.dtsi"
#include "stm32mp15-ddr3-1x4Gb-1066-binG.dtsi"
/ {
};
&adc {
- pinctrl-names = "default";
- pinctrl-0 = <&adc12_usb_pwr_pins_a>;
- vdd-supply = <&vdd>;
- vdda-supply = <&vdd>;
- vref-supply = <&vrefbuf>;
status = "okay";
- adc1: adc@0 {
- /*
- * Type-C USB_PWR_CC1 & USB_PWR_CC2 on in18 & in19.
- * Use at least 5 * RC time, e.g. 5 * (Rp + Rd) * C:
- * 5 * (56 + 47kOhms) * 5pF => 2.5us.
- * Use arbitrary margin here (e.g. 5µs).
- */
- st,min-sample-time-nsecs = <5000>;
- /* ANA0, ANA1, USB Type-C CC1 & CC2 */
- st,adc-channels = <0 1 18 19>;
- status = "okay";
- };
};
&clk_hse {
CLK_UART6_HSI
CLK_UART78_HSI
CLK_SPDIF_PLL4P
- CLK_FDCAN_PLL4Q
+ CLK_FDCAN_PLL4R
CLK_SAI1_PLL3Q
CLK_SAI2_PLL3Q
CLK_SAI3_PLL3Q
/* VCO = 1300.0 MHz => P = 650 (CPU) */
pll1: st,pll@0 {
+ compatible = "st,stm32mp1-pll";
+ reg = <0>;
cfg = < 2 80 0 0 0 PQR(1,0,0) >;
frac = < 0x800 >;
u-boot,dm-pre-reloc;
/* VCO = 1066.0 MHz => P = 266 (AXI), Q = 533 (GPU), R = 533 (DDR) */
pll2: st,pll@1 {
+ compatible = "st,stm32mp1-pll";
+ reg = <1>;
cfg = < 2 65 1 0 0 PQR(1,1,1) >;
frac = < 0x1400 >;
u-boot,dm-pre-reloc;
/* VCO = 417.8 MHz => P = 209, Q = 24, R = 11 */
pll3: st,pll@2 {
+ compatible = "st,stm32mp1-pll";
+ reg = <2>;
cfg = < 1 33 1 16 36 PQR(1,1,1) >;
frac = < 0x1a04 >;
u-boot,dm-pre-reloc;
/* VCO = 594.0 MHz => P = 99, Q = 74, R = 74 */
pll4: st,pll@3 {
+ compatible = "st,stm32mp1-pll";
+ reg = <3>;
cfg = < 3 98 5 7 7 PQR(1,1,1) >;
u-boot,dm-pre-reloc;
};
&sdmmc1_b4_pins_a {
u-boot,dm-spl;
- pins {
+ pins1 {
+ u-boot,dm-spl;
+ };
+ pins2 {
u-boot,dm-spl;
};
};