ARM: dts: stm32: Sync DT files with v4.20 kernel for stm32f4

[oweals/u-boot.git] / arch / arm / dts / stm32f469-disco.dts

diff --git a/arch/arm/dts/stm32f469-disco.dts b/arch/arm/dts/stm32f469-disco.dts
index 3ecef2867366332e451d3a8038289d15134e6dde..3ceb84d8ba8aa0b2324433704019a7bb22a4e750 100644 (file)
--- a/arch/arm/dts/stm32f469-disco.dts
+++ b/arch/arm/dts/stm32f469-disco.dts
@@ -41,8 +41,10 @@
  */
 
 /dts-v1/;
-#include "stm32f429.dtsi"
+#include "stm32f469.dtsi"
 #include "stm32f469-pinctrl.dtsi"
+#include <dt-bindings/gpio/gpio.h>
+#include <dt-bindings/input/input.h>
 
 / {
        model = "STMicroelectronics STM32F469i-DISCO board";
@@ -72,11 +74,40 @@
                dma-ranges = <0xc0000000 0x0 0x10000000>;
        };
 
+       leds {
+               compatible = "gpio-leds";
+               green {
+                       gpios = <&gpiog 6 GPIO_ACTIVE_LOW>;
+                       linux,default-trigger = "heartbeat";
+               };
+               orange {
+                       gpios = <&gpiod 4 GPIO_ACTIVE_LOW>;
+               };
+               red {
+                       gpios = <&gpiod 5 GPIO_ACTIVE_LOW>;
+               };
+               blue {
+                       gpios = <&gpiok 3 GPIO_ACTIVE_LOW>;
+               };
+       };
+
+       gpio_keys {
+               compatible = "gpio-keys";
+               #address-cells = <1>;
+               #size-cells = <0>;
+               autorepeat;
+               button@0 {
+                       label = "User";
+                       linux,code = <KEY_WAKEUP>;
+                       gpios = <&gpioa 0 GPIO_ACTIVE_HIGH>;
+               };
+       };
+
        /* This turns on vbus for otg for host mode (dwc2) */
        vcc5v_otg: vcc5v-otg-regulator {
                compatible = "regulator-fixed";
                enable-active-high;
-               gpio = <&gpiob 2 0>;
+               gpio = <&gpiob 2 GPIO_ACTIVE_HIGH>;
                regulator-name = "vcc5_host1";
                regulator-always-on;
        };
@@ -90,6 +121,55 @@
        clock-frequency = <8000000>;
 };
 
+&dsi {
+       #address-cells = <1>;
+       #size-cells = <0>;
+       status = "okay";
+
+       ports {
+               #address-cells = <1>;
+               #size-cells = <0>;
+
+               port@0 {
+                       reg = <0>;
+                       dsi_in: endpoint {
+                               remote-endpoint = <&ltdc_out_dsi>;
+                       };
+               };
+
+               port@1 {
+                       reg = <1>;
+                       dsi_out: endpoint {
+                               remote-endpoint = <&dsi_panel_in>;
+                       };
+               };
+       };
+
+       panel-dsi@0 {
+               compatible = "orisetech,otm8009a";
+               reg = <0>; /* dsi virtual channel (0..3) */
+               reset-gpios = <&gpioh 7 GPIO_ACTIVE_LOW>;
+               status = "okay";
+
+               port {
+                       dsi_panel_in: endpoint {
+                               remote-endpoint = <&dsi_out>;
+                       };
+               };
+       };
+};
+
+&ltdc {
+       dma-ranges;
+       status = "okay";
+
+       port {
+               ltdc_out_dsi: endpoint@0 {
+                       remote-endpoint = <&dsi_in>;
+               };
+       };
+};
+
 &rtc {
        status = "okay";
 };
@@ -125,6 +205,8 @@
 &sdio {
        status = "okay";
        vmmc-supply = <&mmc_vcard>;
+       cd-gpios = <&gpiog 2 GPIO_ACTIVE_LOW>;
+       broken-cd;
        pinctrl-names = "default", "opendrain";
        pinctrl-0 = <&sdio_pins>;
        pinctrl-1 = <&sdio_pins_od>;