+// SPDX-License-Identifier: (GPL-2.0+ OR X11)
/*
- * Copyright (C) 2015 Marek Vasut <marex@denx.de>
- *
- * SPDX-License-Identifier: GPL-2.0+
+ * Copyright (C) 2015-2019 Marek Vasut <marex@denx.de>
*/
#include "socfpga_cyclone5.dtsi"
+#include <dt-bindings/gpio/gpio.h>
+#include <dt-bindings/input/input.h>
/ {
- model = "samtec VIN|ING FPGA";
- compatible = "altr,socfpga-cyclone5", "altr,socfpga";
+ model = "Softing VIN|ING FPGA";
+ compatible = "samtec,vining", "altr,socfpga-cyclone5", "altr,socfpga";
chosen {
- bootargs = "console=ttyS0,115200";
+ bootargs = "earlyprintk";
+ stdout-path = "serial0:115200n8";
+ };
+
+ memory@0 {
+ name = "memory";
+ device_type = "memory";
+ reg = <0x0 0x40000000>; /* 1GB */
};
aliases {
+ /*
+ * This allow the ethaddr uboot environment variable contents
+ * to be added to the gmac1 device tree blob.
+ */
ethernet0 = &gmac1;
- udc0 = &usb0;
+ ethernet1 = &gmac0;
};
- memory {
- name = "memory";
- device_type = "memory";
- reg = <0x0 0x40000000>; /* 1GB */
+ gpio-keys {
+ compatible = "gpio-keys";
+
+ hps_temp0 {
+ label = "BTN_0"; /* TEMP_OS */
+ gpios = <&portc 18 GPIO_ACTIVE_LOW>; /* HPS_GPIO60 */
+ linux,code = <BTN_0>;
+ };
+
+ hps_hkey0 {
+ label = "BTN_1"; /* DIS_PWR */
+ gpios = <&portc 19 GPIO_ACTIVE_LOW>; /* HPS_GPIO61 */
+ linux,code = <BTN_1>;
+ };
+
+ hps_hkey1 {
+ label = "hps_hkey1"; /* POWER_DOWN */
+ gpios = <&portc 20 GPIO_ACTIVE_LOW>; /* HPS_GPIO62 */
+ linux,code = <KEY_POWER>;
+ };
};
- soc {
- u-boot,dm-pre-reloc;
+ regulator-usb-nrst {
+ compatible = "regulator-fixed";
+ regulator-name = "usb_nrst";
+ regulator-min-microvolt = <5000000>;
+ regulator-max-microvolt = <5000000>;
+ gpio = <&portb 5 GPIO_ACTIVE_HIGH>;
+ startup-delay-us = <70000>;
+ enable-active-high;
+ regulator-always-on;
};
};
+&gmac0 {
+ status = "disabled";
+ phy-mode = "gmii";
+};
+
&gmac1 {
status = "okay";
phy-mode = "rgmii";
+ phy-handle = <&phy1>;
- rxd0-skew-ps = <0>;
- rxd1-skew-ps = <0>;
- rxd2-skew-ps = <0>;
- rxd3-skew-ps = <0>;
- txen-skew-ps = <0>;
- txc-skew-ps = <2600>;
- rxdv-skew-ps = <0>;
- rxc-skew-ps = <2000>;
+ snps,reset-gpio = <&porta 0 GPIO_ACTIVE_LOW>;
+ snps,reset-active-low;
+ snps,reset-delays-us = <10000 10000 10000>;
+
+ mdio0 {
+ #address-cells = <1>;
+ #size-cells = <0>;
+ compatible = "snps,dwmac-mdio";
+ phy1: ethernet-phy@1 {
+ reg = <1>;
+ rxd0-skew-ps = <0>;
+ rxd1-skew-ps = <0>;
+ rxd2-skew-ps = <0>;
+ rxd3-skew-ps = <0>;
+ txd0-skew-ps = <0>;
+ txd1-skew-ps = <0>;
+ txd2-skew-ps = <0>;
+ txd3-skew-ps = <0>;
+ txen-skew-ps = <0>;
+ txc-skew-ps = <1860>;
+ rxdv-skew-ps = <0>;
+ rxc-skew-ps = <1860>;
+ };
+ };
};
-&gpio0 {
+&gpio0 { /* GPIO 0..29 */
status = "okay";
};
-&gpio1 {
+&gpio1 { /* GPIO 30..57 */
status = "okay";
};
-&gpio2 {
+&gpio2 { /* GPIO 58..66 (HLGPI 0..13 at offset 13) */
status = "okay";
};
&i2c0 {
status = "okay";
- rtc: rtc@68 {
- compatible = "stm,m41t82";
- reg = <0x68>;
+ gpio: pca9557@1f {
+ compatible = "nxp,pca9557";
+ reg = <0x1f>;
+ gpio-controller;
+ #gpio-cells = <2>;
+ };
+
+ temp: lm75@48 {
+ compatible = "lm75";
+ reg = <0x48>;
+ };
+
+ at24@50 {
+ compatible = "atmel,24c01";
+ pagesize = <8>;
+ reg = <0x50>;
+ };
+
+ i2cswitch@70 {
+ compatible = "nxp,pca9548";
+ #address-cells = <1>;
+ #size-cells = <0>;
+ reg = <0x70>;
+
+ i2c@0 {
+ #address-cells = <1>;
+ #size-cells = <0>;
+ reg = <0>;
+ };
+
+ i2c@1 {
+ #address-cells = <1>;
+ #size-cells = <0>;
+ reg = <1>;
+ };
+
+ i2c@2 {
+ #address-cells = <1>;
+ #size-cells = <0>;
+ reg = <2>;
+ };
+
+ i2c@3 {
+ #address-cells = <1>;
+ #size-cells = <0>;
+ reg = <3>;
+ };
+
+ i2c@4 {
+ #address-cells = <1>;
+ #size-cells = <0>;
+ reg = <4>;
+ };
+
+ i2c@5 {
+ #address-cells = <1>;
+ #size-cells = <0>;
+ reg = <5>;
+ };
+
+ i2c@6 { /* Backplane EEPROM */
+ #address-cells = <1>;
+ #size-cells = <0>;
+ reg = <6>;
+ eeprom@51 {
+ compatible = "atmel,24c01";
+ pagesize = <8>;
+ reg = <0x51>;
+ };
+ };
+
+ i2c@7 { /* Power board EEPROM */
+ #address-cells = <1>;
+ #size-cells = <0>;
+ reg = <7>;
+ eeprom@51 {
+ compatible = "atmel,24c01";
+ pagesize = <8>;
+ reg = <0x51>;
+ };
+ };
+ };
+};
+
+&i2c1 {
+ status = "okay";
+ clock-frequency = <100000>;
+
+ at24@50 {
+ compatible = "atmel,24c02";
+ pagesize = <8>;
+ reg = <0x50>;
};
};
&qspi {
status = "okay";
- u-boot,dm-pre-reloc;
- flash0: n25q128@0 {
- u-boot,dm-pre-reloc;
+ n25q128@0 {
#address-cells = <1>;
#size-cells = <1>;
- compatible = "n25q128", "spi-flash";
- reg = <0>; /* chip select */
- spi-max-frequency = <50000000>;
+ compatible = "n25q128";
+ reg = <0>; /* chip select */
+ spi-max-frequency = <100000000>;
m25p,fast-read;
- page-size = <256>;
- block-size = <16>; /* 2^16, 64KB */
- read-delay = <4>; /* delay value in read data capture register */
- tshsl-ns = <50>;
- tsd2d-ns = <50>;
- tchsh-ns = <4>;
- tslch-ns = <4>;
+
+ cdns,page-size = <256>;
+ cdns,block-size = <16>;
+ cdns,read-delay = <4>;
+ cdns,tshsl-ns = <50>;
+ cdns,tsd2d-ns = <50>;
+ cdns,tchsh-ns = <4>;
+ cdns,tslch-ns = <4>;
};
- flash1: n25q00@1 {
- u-boot,dm-pre-reloc;
+ n25q00@1 {
#address-cells = <1>;
#size-cells = <1>;
- compatible = "n25q00", "spi-flash";
- reg = <1>; /* chip select */
- spi-max-frequency = <50000000>;
+ compatible = "n25q00";
+ reg = <1>; /* chip select */
+ spi-max-frequency = <100000000>;
m25p,fast-read;
- page-size = <256>;
- block-size = <16>; /* 2^16, 64KB */
- read-delay = <4>; /* delay value in read data capture register */
- tshsl-ns = <50>;
- tsd2d-ns = <50>;
- tchsh-ns = <4>;
- tslch-ns = <4>;
+
+ cdns,page-size = <256>;
+ cdns,block-size = <16>;
+ cdns,read-delay = <4>;
+ cdns,tshsl-ns = <50>;
+ cdns,tsd2d-ns = <50>;
+ cdns,tchsh-ns = <4>;
+ cdns,tslch-ns = <4>;
};
};
&usb0 {
+ dr_mode = "host";
status = "okay";
};
&usb1 {
+ dr_mode = "peripheral";
status = "okay";
};
projects / oweals / u-boot.git / blobdiff