ARM: dts: rmobile: Synchronize Gen3 DTs with Linux 5.0
[oweals/u-boot.git] / arch / arm / dts / r8a77995-draak.dts
index a8e8f2669d4c53ae7492dc489107d3fbac30eebe..db2bed1751b8d308c814fc25c4e96000a819a6f1 100644 (file)
@@ -2,7 +2,7 @@
 /*
  * Device Tree Source for the Draak board
  *
- * Copyright (C) 2016 Renesas Electronics Corp.
+ * Copyright (C) 2016-2018 Renesas Electronics Corp.
  * Copyright (C) 2017 Glider bvba
  */
 
                stdout-path = "serial0:115200n8";
        };
 
-       vga {
-               compatible = "vga-connector";
+       backlight: backlight {
+               compatible = "pwm-backlight";
+               pwms = <&pwm1 0 50000>;
 
-               port {
-                       vga_in: endpoint {
-                               remote-endpoint = <&adv7123_out>;
-                       };
-               };
-       };
-
-       vga-encoder {
-               compatible = "adi,adv7123";
+               brightness-levels = <512 511 505 494 473 440 392 327 241 133 0>;
+               default-brightness-level = <10>;
 
-               ports {
-                       #address-cells = <1>;
-                       #size-cells = <0>;
-
-                       port@0 {
-                               reg = <0>;
-                               adv7123_in: endpoint {
-                                       remote-endpoint = <&du_out_rgb>;
-                               };
-                       };
-                       port@1 {
-                               reg = <1>;
-                               adv7123_out: endpoint {
-                                       remote-endpoint = <&vga_in>;
-                               };
-                       };
-               };
+               power-supply = <&reg_12p0v>;
+               enable-gpios = <&gpio4 0 GPIO_ACTIVE_HIGH>;
        };
 
        composite-in {
                };
        };
 
+       hdmi-out {
+               compatible = "hdmi-connector";
+               type = "a";
+
+               port {
+                       hdmi_con_out: endpoint {
+                               remote-endpoint = <&adv7511_out>;
+                       };
+               };
+       };
+
+       lvds-decoder {
+               compatible = "thine,thc63lvd1024";
+               vcc-supply = <&reg_3p3v>;
+
+               ports {
+                       #address-cells = <1>;
+                       #size-cells = <0>;
+
+                       port@0 {
+                               reg = <0>;
+                               thc63lvd1024_in: endpoint {
+                                       remote-endpoint = <&lvds0_out>;
+                               };
+                       };
+
+                       port@2 {
+                               reg = <2>;
+                               thc63lvd1024_out: endpoint {
+                                       remote-endpoint = <&adv7511_in>;
+                               };
+                       };
+               };
+       };
+
        memory@48000000 {
                device_type = "memory";
                /* first 128MB is reserved for secure area. */
                regulator-always-on;
        };
 
-       x12_clk: x12 {
-               compatible = "fixed-clock";
-               #clock-cells = <0>;
-               clock-frequency = <74250000>;
+       reg_12p0v: regulator1 {
+               compatible = "regulator-fixed";
+               regulator-name = "D12.0V";
+               regulator-min-microvolt = <12000000>;
+               regulator-max-microvolt = <12000000>;
+               regulator-boot-on;
+               regulator-always-on;
        };
-};
 
-&extal_clk {
-       clock-frequency = <48000000>;
-};
+       vga {
+               compatible = "vga-connector";
 
-&pfc {
-       avb0_pins: avb {
-               mux {
-                       groups = "avb0_link", "avb0_mdio", "avb0_mii";
-                       function = "avb0";
+               port {
+                       vga_in: endpoint {
+                               remote-endpoint = <&adv7123_out>;
+                       };
                };
        };
 
-       du_pins: du {
-               groups = "du_rgb888", "du_sync", "du_disp", "du_clk_out_0";
-               function = "du";
-       };
+       vga-encoder {
+               compatible = "adi,adv7123";
 
-       i2c0_pins: i2c0 {
-               groups = "i2c0";
-               function = "i2c0";
-       };
+               ports {
+                       #address-cells = <1>;
+                       #size-cells = <0>;
 
-       i2c1_pins: i2c1 {
-               groups = "i2c1";
-               function = "i2c1";
+                       port@0 {
+                               reg = <0>;
+                               adv7123_in: endpoint {
+                                       remote-endpoint = <&du_out_rgb>;
+                               };
+                       };
+                       port@1 {
+                               reg = <1>;
+                               adv7123_out: endpoint {
+                                       remote-endpoint = <&vga_in>;
+                               };
+                       };
+               };
        };
 
-       pwm0_pins: pwm0 {
-               groups = "pwm0_c";
-               function = "pwm0";
+       x12_clk: x12 {
+               compatible = "fixed-clock";
+               #clock-cells = <0>;
+               clock-frequency = <74250000>;
        };
+};
 
-       pwm1_pins: pwm1 {
-               groups = "pwm1_c";
-               function = "pwm1";
-       };
+&avb {
+       pinctrl-0 = <&avb0_pins>;
+       pinctrl-names = "default";
+       renesas,no-ether-link;
+       phy-handle = <&phy0>;
+       phy-mode = "rgmii-txid";
+       status = "okay";
 
-       scif2_pins: scif2 {
-               groups = "scif2_data";
-               function = "scif2";
+       phy0: ethernet-phy@0 {
+               rxc-skew-ps = <1500>;
+               reg = <0>;
+               interrupt-parent = <&gpio5>;
+               interrupts = <19 IRQ_TYPE_LEVEL_LOW>;
        };
+};
 
-       sdhi2_pins: sd2 {
-               groups = "mmc_data8", "mmc_ctrl";
-               function = "mmc";
-               power-source = <1800>;
-       };
+&du {
+       pinctrl-0 = <&du_pins>;
+       pinctrl-names = "default";
+       status = "okay";
 
-       sdhi2_pins_uhs: sd2_uhs {
-               groups = "mmc_data8", "mmc_ctrl";
-               function = "mmc";
-               power-source = <1800>;
-       };
+       clocks = <&cpg CPG_MOD 724>,
+                <&cpg CPG_MOD 723>,
+                <&x12_clk>;
+       clock-names = "du.0", "du.1", "dclkin.0";
 
-       usb0_pins: usb0 {
-               groups = "usb0";
-               function = "usb0";
+       ports {
+               port@0 {
+                       endpoint {
+                               remote-endpoint = <&adv7123_in>;
+                       };
+               };
        };
+};
 
-       vin4_pins_cvbs: vin4 {
-               groups = "vin4_data8", "vin4_sync", "vin4_clk";
-               function = "vin4";
-       };
+&ehci0 {
+       dr_mode = "host";
+       status = "okay";
+};
+
+&extal_clk {
+       clock-frequency = <48000000>;
+};
+
+&hsusb {
+       dr_mode = "host";
+       status = "okay";
 };
 
 &i2c0 {
        pinctrl-names = "default";
        status = "okay";
 
-       eeprom@50 {
-               compatible = "rohm,br24t01", "atmel,24c01";
-               reg = <0x50>;
-               pagesize = <8>;
-       };
-
        composite-in@20 {
                compatible = "adi,adv7180cp";
                reg = <0x20>;
 
-               port {
+               ports {
                        #address-cells = <1>;
                        #size-cells = <0>;
 
 
        };
 
+       hdmi-encoder@39 {
+               compatible = "adi,adv7511w";
+               reg = <0x39>, <0x3f>, <0x38>, <0x3c>;
+               reg-names = "main", "edid", "packet", "cec";
+               interrupt-parent = <&gpio1>;
+               interrupts = <28 IRQ_TYPE_LEVEL_LOW>;
+
+               /* Depends on LVDS */
+               max-clock = <135000000>;
+               min-vrefresh = <50>;
+
+               adi,input-depth = <8>;
+               adi,input-colorspace = "rgb";
+               adi,input-clock = "1x";
+               adi,input-style = <1>;
+               adi,input-justification = "evenly";
+
+               ports {
+                       #address-cells = <1>;
+                       #size-cells = <0>;
+
+                       port@0 {
+                               reg = <0>;
+                               adv7511_in: endpoint {
+                                       remote-endpoint = <&thc63lvd1024_out>;
+                               };
+                       };
+
+                       port@1 {
+                               reg = <1>;
+                               adv7511_out: endpoint {
+                                       remote-endpoint = <&hdmi_con_out>;
+                               };
+                       };
+               };
+       };
+
        hdmi-decoder@4c {
                compatible = "adi,adv7612";
                reg = <0x4c>;
                        };
                };
        };
+
+       eeprom@50 {
+               compatible = "rohm,br24t01", "atmel,24c01";
+               reg = <0x50>;
+               pagesize = <8>;
+       };
 };
 
 &i2c1 {
        status = "okay";
 };
 
-&du {
-       pinctrl-0 = <&du_pins>;
-       pinctrl-names = "default";
+&lvds0 {
        status = "okay";
 
-       clocks = <&cpg CPG_MOD 724>,
-                <&cpg CPG_MOD 723>,
-                <&x12_clk>;
-       clock-names = "du.0", "du.1", "dclkin.0";
+       clocks = <&cpg CPG_MOD 727>,
+                <&x12_clk>,
+                <&extal_clk>;
+       clock-names = "fck", "dclkin.0", "extal";
 
        ports {
-               port@0 {
-                       endpoint {
-                               remote-endpoint = <&adv7123_in>;
+               port@1 {
+                       lvds0_out: endpoint {
+                               remote-endpoint = <&thc63lvd1024_in>;
                        };
                };
        };
 };
 
-&ehci0 {
-       status = "okay";
+&lvds1 {
+       clocks = <&cpg CPG_MOD 727>,
+                <&x12_clk>,
+                <&extal_clk>;
+       clock-names = "fck", "dclkin.0", "extal";
 };
 
 &ohci0 {
+       dr_mode = "host";
        status = "okay";
 };
 
-&avb {
-       pinctrl-0 = <&avb0_pins>;
+&pfc {
+       avb0_pins: avb {
+               mux {
+                       groups = "avb0_link", "avb0_mdio", "avb0_mii";
+                       function = "avb0";
+               };
+       };
+
+       du_pins: du {
+               groups = "du_rgb888", "du_sync", "du_disp", "du_clk_out_0";
+               function = "du";
+       };
+
+       i2c0_pins: i2c0 {
+               groups = "i2c0";
+               function = "i2c0";
+       };
+
+       i2c1_pins: i2c1 {
+               groups = "i2c1";
+               function = "i2c1";
+       };
+
+       pwm0_pins: pwm0 {
+               groups = "pwm0_c";
+               function = "pwm0";
+       };
+
+       pwm1_pins: pwm1 {
+               groups = "pwm1_c";
+               function = "pwm1";
+       };
+
+       scif2_pins: scif2 {
+               groups = "scif2_data";
+               function = "scif2";
+       };
+
+       sdhi2_pins: sd2 {
+               groups = "mmc_data8", "mmc_ctrl";
+               function = "mmc";
+               power-source = <1800>;
+       };
+
+       sdhi2_pins_uhs: sd2_uhs {
+               groups = "mmc_data8", "mmc_ctrl";
+               function = "mmc";
+               power-source = <1800>;
+       };
+
+       usb0_pins: usb0 {
+               groups = "usb0";
+               function = "usb0";
+       };
+
+       vin4_pins_cvbs: vin4 {
+               groups = "vin4_data8", "vin4_sync", "vin4_clk";
+               function = "vin4";
+       };
+};
+
+&pwm0 {
+       pinctrl-0 = <&pwm0_pins>;
        pinctrl-names = "default";
-       renesas,no-ether-link;
-       phy-handle = <&phy0>;
-       phy-mode = "rgmii-txid";
+
        status = "okay";
+};
 
-       phy0: ethernet-phy@0 {
-               rxc-skew-ps = <1500>;
-               reg = <0>;
-               interrupt-parent = <&gpio5>;
-               interrupts = <19 IRQ_TYPE_LEVEL_LOW>;
-       };
+&pwm1 {
+       pinctrl-0 = <&pwm1_pins>;
+       pinctrl-names = "default";
+
+       status = "okay";
+};
+
+&rwdt {
+       timeout-sec = <60>;
+       status = "okay";
 };
 
 &scif2 {
        pinctrl-0 = <&usb0_pins>;
        pinctrl-names = "default";
 
-       status = "okay";
-};
-
-&pwm0 {
-       pinctrl-0 = <&pwm0_pins>;
-       pinctrl-names = "default";
-
-       status = "okay";
-};
-
-&pwm1 {
-       pinctrl-0 = <&pwm1_pins>;
-       pinctrl-names = "default";
-
-       status = "okay";
-};
-
-&rwdt {
-       timeout-sec = <60>;
+       renesas,no-otg-pins;
        status = "okay";
 };