ARM: imx: pico-imx8mq: Add support for Technexion Pico-iMX8MQ

[oweals/u-boot.git] / arch / arm / dts / meson-g12a-u200.dts

diff --git a/arch/arm/dts/meson-g12a-u200.dts b/arch/arm/dts/meson-g12a-u200.dts
index 8551fbd4a488cfd358c160104177e3a9e613108d..a26bfe72550fe47cb94dab419adc15531a8d2b0e 100644 (file)
--- a/arch/arm/dts/meson-g12a-u200.dts
+++ b/arch/arm/dts/meson-g12a-u200.dts
@@ -129,6 +129,24 @@
                regulator-always-on;
        };
 
+       vddcpu: regulator-vddcpu {
+               /*
+                * MP8756GD Regulator.
+                */
+               compatible = "pwm-regulator";
+
+               regulator-name = "VDDCPU";
+               regulator-min-microvolt = <721000>;
+               regulator-max-microvolt = <1022000>;
+
+               vin-supply = <&main_12v>;
+
+               pwms = <&pwm_AO_cd 1 1250 0>;
+               pwm-dutycycle-range = <100 0>;
+
+               regulator-boot-on;
+               regulator-always-on;
+       };
 };
 
 &cec_AO {
@@ -145,6 +163,34 @@
        hdmi-phandle = <&hdmi_tx>;
 };
 
+&cpu0 {
+       cpu-supply = <&vddcpu>;
+       operating-points-v2 = <&cpu_opp_table>;
+       clocks = <&clkc CLKID_CPU_CLK>;
+       clock-latency = <50000>;
+};
+
+&cpu1 {
+       cpu-supply = <&vddcpu>;
+       operating-points-v2 = <&cpu_opp_table>;
+       clocks = <&clkc CLKID_CPU_CLK>;
+       clock-latency = <50000>;
+};
+
+&cpu2 {
+       cpu-supply = <&vddcpu>;
+       operating-points-v2 = <&cpu_opp_table>;
+       clocks = <&clkc CLKID_CPU_CLK>;
+       clock-latency = <50000>;
+};
+
+&cpu3 {
+       cpu-supply = <&vddcpu>;
+       operating-points-v2 = <&cpu_opp_table>;
+       clocks = <&clkc CLKID_CPU_CLK>;
+       clock-latency = <50000>;
+};
+
 &cvbs_vdac_port {
        cvbs_vdac_out: endpoint {
                remote-endpoint = <&cvbs_connector_in>;
@@ -197,6 +243,14 @@
        pinctrl-names = "default";
 };
 
+&pwm_AO_cd {
+       pinctrl-0 = <&pwm_ao_d_e_pins>;
+       pinctrl-names = "default";
+       clocks = <&xtal>;
+       clock-names = "clkin1";
+       status = "okay";
+};
+
 /* SD card */
 &sd_emmc_b {
        status = "okay";
@@ -217,7 +271,7 @@
 /* eMMC */
 &sd_emmc_c {
        status = "okay";
-       pinctrl-0 = <&emmc_pins>, <&emmc_ds_pins>;
+       pinctrl-0 = <&emmc_ctrl_pins>, <&emmc_data_8b_pins>, <&emmc_ds_pins>;
        pinctrl-1 = <&emmc_clk_gate_pins>;
        pinctrl-names = "default", "clk-gate";