arm: dts: k3-j721e-common-proc-board: Add pinmux for SD card

[oweals/u-boot.git] / arch / arm / dts / k3-j721e-r5-common-proc-board.dts

diff --git a/arch/arm/dts/k3-j721e-r5-common-proc-board.dts b/arch/arm/dts/k3-j721e-r5-common-proc-board.dts
index 1a8e1078611010326112a337c6b35ccc2aca74bc..28a355d49c9b10af64bb28a1bbe9c59b993c73b0 100644 (file)
--- a/arch/arm/dts/k3-j721e-r5-common-proc-board.dts
+++ b/arch/arm/dts/k3-j721e-r5-common-proc-board.dts
@@ -119,6 +119,20 @@
                        J721E_IOPAD(0x210, PIN_INPUT, 7) /* (W3) MCAN1_RX.GPIO1_3 */
                >;
        };
+
+       main_mmc1_pins_default: main_mmc1_pins_default {
+               pinctrl-single,pins = <
+                       J721E_IOPAD(0x254, PIN_INPUT, 0) /* (R29) MMC1_CMD */
+                       J721E_IOPAD(0x250, PIN_INPUT, 0) /* (P25) MMC1_CLK */
+                       J721E_IOPAD(0x2ac, PIN_INPUT, 0) /* (P25) MMC1_CLKLB */
+                       J721E_IOPAD(0x24c, PIN_INPUT, 0) /* (R24) MMC1_DAT0 */
+                       J721E_IOPAD(0x248, PIN_INPUT, 0) /* (P24) MMC1_DAT1 */
+                       J721E_IOPAD(0x244, PIN_INPUT, 0) /* (R25) MMC1_DAT2 */
+                       J721E_IOPAD(0x240, PIN_INPUT, 0) /* (R26) MMC1_DAT3 */
+                       J721E_IOPAD(0x258, PIN_INPUT, 0) /* (P23) MMC1_SDCD */
+                       J721E_IOPAD(0x25c, PIN_INPUT, 0) /* (R28) MMC1_SDWP */
+               >;
+       };
 };
 
 &wkup_uart0 {
@@ -156,6 +170,8 @@
        /delete-property/ power-domains;
        /delete-property/ assigned-clocks;
        /delete-property/ assigned-clock-parents;
+       pinctrl-names = "default";
+       pinctrl-0 = <&main_mmc1_pins_default>;
        clock-names = "clk_xin";
        clocks = <&clk_200mhz>;
        ti,driver-strength-ohm = <50>;