drivers: usb: host: Add BRCM xHCI driver

[oweals/u-boot.git] / arch / arm / dts / k3-am654-base-board-u-boot.dtsi

diff --git a/arch/arm/dts/k3-am654-base-board-u-boot.dtsi b/arch/arm/dts/k3-am654-base-board-u-boot.dtsi
index 8589f76d234651e31d2eb12598764822c4fe7dfd..54ecb3d44400241f110647885521ea7b6d80ffa8 100644 (file)
--- a/arch/arm/dts/k3-am654-base-board-u-boot.dtsi
+++ b/arch/arm/dts/k3-am654-base-board-u-boot.dtsi
@@ -25,10 +25,20 @@
                compatible = "ti,am654-sdhci-5.1";
                reg = <0x0 0x4FA0000 0x0 0x1000>,
                      <0x0 0x4FB0000 0x0 0x400>;
-               clocks = <&k3_clks 48 1>;
+               clocks =<&k3_clks 48 0>, <&k3_clks 48 1>;
+               clock-names = "clk_ahb", "clk_xin";
                power-domains = <&k3_pds 48 TI_SCI_PD_EXCLUSIVE>;
                max-frequency = <25000000>;
-               ti,otap-del-sel = <0x2>;
+               ti,otap-del-sel-legacy = <0x0>;
+               ti,otap-del-sel-mmc-hs = <0x0>;
+               ti,otap-del-sel-sd-hs = <0x0>;
+               ti,otap-del-sel-sdr12 = <0x0>;
+               ti,otap-del-sel-sdr25 = <0x0>;
+               ti,otap-del-sel-sdr50 = <0x8>;
+               ti,otap-del-sel-sdr104 = <0x7>;
+               ti,otap-del-sel-ddr50 = <0x4>;
+               ti,otap-del-sel-ddr52 = <0x4>;
+               ti,otap-del-sel-hs200 = <0x7>;
                ti,trm-icp = <0x8>;
        };
 
@@ -336,13 +346,12 @@
                reg = <0>;
                /* TODO: phy reset: TCA9555RTWR(i2c:0x21)[p04].GPIO_MCU_RGMII_RSTN */
                ti,rx-internal-delay = <DP83867_RGMIIDCTL_2_00_NS>;
-               ti,tx-internal-delay = <DP83867_RGMIIDCTL_2_00_NS>;
                ti,fifo-depth = <DP83867_PHYCR_FIFO_DEPTH_4_B_NIB>;
        };
 };
 
 &cpsw_port1 {
-       phy-mode = "rgmii-id";
+       phy-mode = "rgmii-rxid";
        phy-handle = <&phy0>;
 };
 
@@ -361,3 +370,7 @@
 &wkup_i2c0 {
        u-boot,dm-spl;
 };
+
+&usb1 {
+       dr_mode = "peripheral";
+};