drivers: usb: host: Add BRCM xHCI driver

[oweals/u-boot.git] / arch / arm / dts / k3-am654-base-board-u-boot.dtsi

diff --git a/arch/arm/dts/k3-am654-base-board-u-boot.dtsi b/arch/arm/dts/k3-am654-base-board-u-boot.dtsi
index 5d9ecb669f5d26ce8ed00c593927513ee9d861c6..54ecb3d44400241f110647885521ea7b6d80ffa8 100644 (file)
--- a/arch/arm/dts/k3-am654-base-board-u-boot.dtsi
+++ b/arch/arm/dts/k3-am654-base-board-u-boot.dtsi
@@ -25,10 +25,20 @@
                compatible = "ti,am654-sdhci-5.1";
                reg = <0x0 0x4FA0000 0x0 0x1000>,
                      <0x0 0x4FB0000 0x0 0x400>;
-               clocks = <&k3_clks 48 1>;
-               power-domains = <&k3_pds 48>;
+               clocks =<&k3_clks 48 0>, <&k3_clks 48 1>;
+               clock-names = "clk_ahb", "clk_xin";
+               power-domains = <&k3_pds 48 TI_SCI_PD_EXCLUSIVE>;
                max-frequency = <25000000>;
-               ti,otap-del-sel = <0x2>;
+               ti,otap-del-sel-legacy = <0x0>;
+               ti,otap-del-sel-mmc-hs = <0x0>;
+               ti,otap-del-sel-sd-hs = <0x0>;
+               ti,otap-del-sel-sdr12 = <0x0>;
+               ti,otap-del-sel-sdr25 = <0x0>;
+               ti,otap-del-sel-sdr50 = <0x8>;
+               ti,otap-del-sel-sdr104 = <0x7>;
+               ti,otap-del-sel-ddr50 = <0x4>;
+               ti,otap-del-sel-ddr52 = <0x4>;
+               ti,otap-del-sel-hs200 = <0x7>;
                ti,trm-icp = <0x8>;
        };
 
@@ -98,7 +108,7 @@
                dma-coherent;
                clocks = <&k3_clks 5 10>;
                clock-names = "fck";
-               power-domains = <&k3_pds 5>;
+               power-domains = <&k3_pds 5 TI_SCI_PD_EXCLUSIVE>;
                ti,psil-base = <0x7000>;
 
                dmas = <&mcu_udmap &mcu_cpsw 0 UDMA_DIR_TX>,
@@ -222,6 +232,14 @@
        u-boot,dm-spl;
 };
 
+&wkup_pmx0 {
+       u-boot,dm-spl;
+
+       wkup_i2c0_pins_default {
+               u-boot,dm-spl;
+       };
+};
+
 &main_pmx0 {
        u-boot,dm-spl;
        main_uart0_pins_default: main_uart0_pins_default {
@@ -328,13 +346,12 @@
                reg = <0>;
                /* TODO: phy reset: TCA9555RTWR(i2c:0x21)[p04].GPIO_MCU_RGMII_RSTN */
                ti,rx-internal-delay = <DP83867_RGMIIDCTL_2_00_NS>;
-               ti,tx-internal-delay = <DP83867_RGMIIDCTL_2_00_NS>;
                ti,fifo-depth = <DP83867_PHYCR_FIFO_DEPTH_4_B_NIB>;
        };
 };
 
 &cpsw_port1 {
-       phy-mode = "rgmii-id";
+       phy-mode = "rgmii-rxid";
        phy-handle = <&phy0>;
 };
 
@@ -349,3 +366,11 @@
                reg-names = "gmii-sel";
        };
 };
+
+&wkup_i2c0 {
+       u-boot,dm-spl;
+};
+
+&usb1 {
+       dr_mode = "peripheral";
+};