dts: Disable device tree for SPL on all boards

[oweals/u-boot.git] / arch / arm / dts / exynos5250-snow.dts

diff --git a/arch/arm/dts/exynos5250-snow.dts b/arch/arm/dts/exynos5250-snow.dts
index c584172b8698f83eb1b8a05bf23a0027b76781e1..e4b3dc29e470e927f95ebfde622637da5be952c5 100644 (file)
--- a/arch/arm/dts/exynos5250-snow.dts
+++ b/arch/arm/dts/exynos5250-snow.dts
@@ -10,7 +10,7 @@
 */
 
 /dts-v1/;
-/include/ "exynos5250.dtsi"
+#include "exynos5250.dtsi"
 
 / {
        model = "Google Snow";
@@ -40,11 +40,12 @@
        };
 
        i2c4: i2c@12ca0000 {
-               cros-ec@1e {
+               cros_ec: cros-ec@1e {
                        reg = <0x1e>;
-                       compatible = "google,cros-ec";
+                       compatible = "google,cros-ec-i2c";
                        i2c-max-frequency = <100000>;
-                       ec-interrupt = <&gpio 182 1>;
+                       u-boot,i2c-offset-len = <0>;
+                       ec-interrupt = <&gpx1 6 GPIO_ACTIVE_LOW>;
                };
 
                power-regulator@48 {
@@ -53,14 +54,23 @@
                };
        };
 
+       spi@12d30000 {
+               spi-max-frequency = <50000000>;
+               firmware_storage_spi: flash@0 {
+                       compatible = "spi-flash";
+                       reg = <0>;
+               };
+       };
+
        spi@131b0000 {
                spi-max-frequency = <1000000>;
                spi-deactivate-delay = <100>;
-               cros-ec@0 {
-                       reg = <0>;
-                       compatible = "google,cros-ec";
+
+               embedded-controller {
+                       compatible = "google,cros-ec-i2c";
+                       reg = <0x1e>;
                        spi-max-frequency = <5000000>;
-                       ec-interrupt = <&gpio 182 1>;
+                       ec-interrupt = <&gpx1 6 GPIO_ACTIVE_LOW>;
                        optimise-flash-write;
                        status = "disabled";
                };
@@ -68,7 +78,7 @@
 
        sound@3830000 {
                samsung,codec-type = "max98095";
-               codec-enable-gpio = <&gpio 0xb7 0>;
+               codec-enable-gpio = <&gpx1 7 GPIO_ACTIVE_HIGH>;
        };
 
        sound@12d60000 {
@@ -80,12 +90,25 @@
                        reg = <0x22>;
                        compatible = "maxim,max98095-codec";
                };
+
+               ptn3460-bridge@20 {
+                       compatible = "nxp,ptn3460";
+                       reg = <0x20>;
+                       /*
+                        * TODO(sjg@chromium.org): Use GPIOs here
+                        * powerdown-gpio = <&gpy2 5 0>;
+                        * reset-gpio = <&gpx1 5 0>;
+                        * edid-emulation = <5>;
+                        * pinctrl-names = "default";
+                        * pinctrl-0 = <&ptn3460_gpios>;
+                        */
+               };
        };
 
        i2c@12c60000 {
                pmic@9 {
                        reg = <0x9>;
-                       compatible = "maxim,max77686_pmic";
+                       compatible = "maxim,max77686";
                };
        };
 
@@ -110,11 +133,12 @@
        };
 
        ehci@12110000 {
-               samsung,vbus-gpio = <&gpio 0x309 0>; /* X11 */
+               samsung,vbus-gpio = <&gpx1 1 GPIO_ACTIVE_HIGH>;
+               status = "okay";
        };
 
        xhci@12000000 {
-               samsung,vbus-gpio = <&gpio 0x317 0>; /* X27 */
+               samsung,vbus-gpio = <&gpx2 7 GPIO_ACTIVE_HIGH>;
        };
 
        tmu@10060000 {
@@ -130,58 +154,49 @@
                samsung,dc-value        = <25>;
        };
 
-       cros-ec-keyb {
-               compatible = "google,cros-ec-keyb";
-               google,key-rows = <8>;
-               google,key-columns = <13>;
-               google,repeat-delay-ms = <240>;
-               google,repeat-rate-ms = <30>;
-               google,ghost-filter;
-               /*
-                * Keymap entries take the form of 0xRRCCKKKK where
-                * RR=Row CC=Column KKKK=Key Code
-                * The values below are for a US keyboard layout and
-                * are taken from the Linux driver. Note that the
-                * 102ND key is not used for US keyboards.
-                */
-               linux,keymap = <
-                       /* CAPSLCK F1         B          F10     */
-                       0x0001003a 0x0002003b 0x00030030 0x00040044
-                       /* N       =          R_ALT      ESC     */
-                       0x00060031 0x0008000d 0x000a0064 0x01010001
-                       /* F4      G          F7         H       */
-                       0x0102003e 0x01030022 0x01040041 0x01060023
-                       /* '       F9         BKSPACE    L_CTRL  */
-                       0x01080028 0x01090043 0x010b000e 0x0200001d
-                       /* TAB     F3         T          F6      */
-                       0x0201000f 0x0202003d 0x02030014 0x02040040
-                       /* ]       Y          102ND      [       */
-                       0x0205001b 0x02060015 0x02070056 0x0208001a
-                       /* F8      GRAVE      F2         5       */
-                       0x02090042 0x03010029 0x0302003c 0x03030006
-                       /* F5      6          -          \       */
-                       0x0304003f 0x03060007 0x0308000c 0x030b002b
-                       /* R_CTRL  A          D          F       */
-                       0x04000061 0x0401001e 0x04020020 0x04030021
-                       /* S       K          J          ;       */
-                       0x0404001f 0x04050025 0x04060024 0x04080027
-                       /* L       ENTER      Z          C       */
-                       0x04090026 0x040b001c 0x0501002c 0x0502002e
-                       /* V       X          ,          M       */
-                       0x0503002f 0x0504002d 0x05050033 0x05060032
-                       /* L_SHIFT /          .          SPACE   */
-                       0x0507002a 0x05080035 0x05090034 0x050B0039
-                       /* 1       3          4          2       */
-                       0x06010002 0x06020004 0x06030005 0x06040003
-                       /* 8       7          0          9       */
-                       0x06050009 0x06060008 0x0608000b 0x0609000a
-                       /* L_ALT   DOWN       RIGHT      Q       */
-                       0x060a0038 0x060b006c 0x060c006a 0x07010010
-                       /* E       R          W          I       */
-                       0x07020012 0x07030013 0x07040011 0x07050017
-                       /* U       R_SHIFT    P          O       */
-                       0x07060016 0x07070036 0x07080019 0x07090018
-                       /* UP      LEFT    */
-                       0x070b0067 0x070c0069>;
+       fimd@14400000 {
+               samsung,vl-freq = <60>;
+               samsung,vl-col = <1366>;
+               samsung,vl-row = <768>;
+               samsung,vl-width = <1366>;
+               samsung,vl-height = <768>;
+
+               samsung,vl-clkp;
+               samsung,vl-dp;
+               samsung,vl-hsp;
+               samsung,vl-vsp;
+
+               samsung,vl-bpix = <4>;
+
+               samsung,vl-hspw = <32>;
+               samsung,vl-hbpd = <80>;
+               samsung,vl-hfpd = <48>;
+               samsung,vl-vspw = <5>;
+               samsung,vl-vbpd = <14>;
+               samsung,vl-vfpd = <3>;
+               samsung,vl-cmd-allow-len = <0xf>;
+
+               samsung,winid = <0>;
+               samsung,interface-mode = <1>;
+               samsung,dp-enabled = <1>;
+               samsung,dual-lcd-enabled = <0>;
+       };
+
+       dp@145b0000 {
+               samsung,lt-status = <0>;
+
+               samsung,master-mode = <0>;
+               samsung,bist-mode = <0>;
+               samsung,bist-pattern = <0>;
+               samsung,h-sync-polarity = <0>;
+               samsung,v-sync-polarity = <0>;
+               samsung,interlaced = <0>;
+               samsung,color-space = <0>;
+               samsung,dynamic-range = <0>;
+               samsung,ycbcr-coeff = <0>;
+               samsung,color-depth = <1>;
        };
+
 };
+
+#include "cros-ec-keyboard.dtsi"