/dts-v1/;
#include "dra74x.dtsi"
-#include <dt-bindings/gpio/gpio.h>
+#include "dra7-evm-common.dtsi"
+#include "dra74x-mmc-iodelay.dtsi"
/ {
model = "TI DRA742";
compatible = "ti,dra7-evm", "ti,dra742", "ti,dra74", "ti,dra7";
- chosen {
- stdout-path = &uart1;
- tick-timer = &timer2;
+ memory@0 {
+ device_type = "memory";
+ reg = <0x0 0x80000000 0x0 0x60000000>; /* 1536 MB */
};
- memory {
- device_type = "memory";
- reg = <0x80000000 0x60000000>; /* 1536 MB */
+ evm_1v8_sw: fixedregulator-evm_1v8 {
+ compatible = "regulator-fixed";
+ regulator-name = "evm_1v8";
+ vin-supply = <&smps9_reg>;
+ regulator-min-microvolt = <1800000>;
+ regulator-max-microvolt = <1800000>;
};
- mmc2_3v3: fixedregulator-mmc2 {
+ evm_3v3_sd: fixedregulator-sd {
compatible = "regulator-fixed";
- regulator-name = "mmc2_3v3";
+ regulator-name = "evm_3v3_sd";
regulator-min-microvolt = <3300000>;
regulator-max-microvolt = <3300000>;
+ enable-active-high;
+ gpio = <&pcf_gpio_21 5 GPIO_ACTIVE_HIGH>;
};
- extcon_usb1: extcon_usb1 {
- compatible = "linux,extcon-usb-gpio";
- id-gpio = <&pcf_gpio_21 1 GPIO_ACTIVE_HIGH>;
+ evm_3v3_sw: fixedregulator-evm_3v3_sw {
+ compatible = "regulator-fixed";
+ regulator-name = "evm_3v3_sw";
+ vin-supply = <&sysen1>;
+ regulator-min-microvolt = <3300000>;
+ regulator-max-microvolt = <3300000>;
+ };
+
+ aic_dvdd: fixedregulator-aic_dvdd {
+ /* TPS77018DBVT */
+ compatible = "regulator-fixed";
+ regulator-name = "aic_dvdd";
+ vin-supply = <&evm_3v3_sw>;
+ regulator-min-microvolt = <1800000>;
+ regulator-max-microvolt = <1800000>;
};
extcon_usb2: extcon_usb2 {
regulator-always-on;
regulator-boot-on;
enable-active-high;
+ vin-supply = <&sysen2>;
gpio = <&gpio7 11 GPIO_ACTIVE_HIGH>;
};
+
};
&dra7_pmx_core {
- pinctrl-names = "default";
- pinctrl-0 = <&vtt_pin>;
-
- vtt_pin: pinmux_vtt_pin {
- pinctrl-single,pins = <
- 0x3b4 (PIN_OUTPUT | MUX_MODE14) /* spi1_cs1.gpio7_11 */
- >;
- };
-
- i2c1_pins: pinmux_i2c1_pins {
- pinctrl-single,pins = <
- 0x400 (PIN_INPUT | MUX_MODE0) /* i2c1_sda */
- 0x404 (PIN_INPUT | MUX_MODE0) /* i2c1_scl */
- >;
- };
-
- i2c2_pins: pinmux_i2c2_pins {
- pinctrl-single,pins = <
- 0x408 (PIN_INPUT | MUX_MODE0) /* i2c2_sda */
- 0x40c (PIN_INPUT | MUX_MODE0) /* i2c2_scl */
- >;
- };
-
- i2c3_pins: pinmux_i2c3_pins {
- pinctrl-single,pins = <
- 0x288 (PIN_INPUT | MUX_MODE9) /* gpio6_14.i2c3_sda */
- 0x28c (PIN_INPUT | MUX_MODE9) /* gpio6_15.i2c3_scl */
- >;
- };
-
- mcspi1_pins: pinmux_mcspi1_pins {
- pinctrl-single,pins = <
- 0x3a4 (PIN_INPUT | MUX_MODE0) /* spi1_sclk */
- 0x3a8 (PIN_INPUT | MUX_MODE0) /* spi1_d1 */
- 0x3ac (PIN_INPUT | MUX_MODE0) /* spi1_d0 */
- 0x3b0 (PIN_INPUT_SLEW | MUX_MODE0) /* spi1_cs0 */
- 0x3b8 (PIN_INPUT_SLEW | MUX_MODE6) /* spi1_cs2.hdmi1_hpd */
- 0x3bc (PIN_INPUT_SLEW | MUX_MODE6) /* spi1_cs3.hdmi1_cec */
- >;
- };
-
- mcspi2_pins: pinmux_mcspi2_pins {
- pinctrl-single,pins = <
- 0x3c0 (PIN_INPUT | MUX_MODE0) /* spi2_sclk */
- 0x3c4 (PIN_INPUT_SLEW | MUX_MODE0) /* spi2_d1 */
- 0x3c8 (PIN_INPUT_SLEW | MUX_MODE0) /* spi2_d1 */
- 0x3cc (PIN_INPUT_SLEW | MUX_MODE0) /* spi2_cs0 */
- >;
- };
-
- uart1_pins: pinmux_uart1_pins {
- pinctrl-single,pins = <
- 0x3e0 (PIN_INPUT_SLEW | MUX_MODE0) /* uart1_rxd */
- 0x3e4 (PIN_INPUT_SLEW | MUX_MODE0) /* uart1_txd */
- 0x3e8 (PIN_INPUT | MUX_MODE3) /* uart1_ctsn */
- 0x3ec (PIN_INPUT | MUX_MODE3) /* uart1_rtsn */
- >;
- };
-
- uart2_pins: pinmux_uart2_pins {
- pinctrl-single,pins = <
- 0x3f0 (PIN_INPUT | MUX_MODE0) /* uart2_rxd */
- 0x3f4 (PIN_INPUT | MUX_MODE0) /* uart2_txd */
- 0x3f8 (PIN_INPUT | MUX_MODE0) /* uart2_ctsn */
- 0x3fc (PIN_INPUT | MUX_MODE0) /* uart2_rtsn */
- >;
- };
-
- uart3_pins: pinmux_uart3_pins {
- pinctrl-single,pins = <
- 0x248 (PIN_INPUT_SLEW | MUX_MODE0) /* uart3_rxd */
- 0x24c (PIN_INPUT_SLEW | MUX_MODE0) /* uart3_txd */
- >;
- };
-
- qspi1_pins: pinmux_qspi1_pins {
- pinctrl-single,pins = <
- 0x4c (PIN_INPUT | MUX_MODE1) /* gpmc_a3.qspi1_cs2 */
- 0x50 (PIN_INPUT | MUX_MODE1) /* gpmc_a4.qspi1_cs3 */
- 0x74 (PIN_INPUT | MUX_MODE1) /* gpmc_a13.qspi1_rtclk */
- 0x78 (PIN_INPUT | MUX_MODE1) /* gpmc_a14.qspi1_d3 */
- 0x7c (PIN_INPUT | MUX_MODE1) /* gpmc_a15.qspi1_d2 */
- 0x80 (PIN_INPUT | MUX_MODE1) /* gpmc_a16.qspi1_d1 */
- 0x84 (PIN_INPUT | MUX_MODE1) /* gpmc_a17.qspi1_d0 */
- 0x88 (PIN_INPUT | MUX_MODE1) /* qpmc_a18.qspi1_sclk */
- 0xb8 (PIN_INPUT_PULLUP | MUX_MODE1) /* gpmc_cs2.qspi1_cs0 */
- 0xbc (PIN_INPUT_PULLUP | MUX_MODE1) /* gpmc_cs3.qspi1_cs1 */
- >;
- };
-
- usb1_pins: pinmux_usb1_pins {
- pinctrl-single,pins = <
- 0x280 (PIN_INPUT_SLEW | MUX_MODE0) /* usb1_drvvbus */
- >;
- };
-
- usb2_pins: pinmux_usb2_pins {
- pinctrl-single,pins = <
- 0x284 (PIN_INPUT_SLEW | MUX_MODE0) /* usb2_drvvbus */
- >;
- };
-
- nand_flash_x16: nand_flash_x16 {
- /* On DRA7 EVM, GPMC_WPN and NAND_BOOTn comes from DIP switch
- * So NAND flash requires following switch settings:
- * SW5.9 (GPMC_WPN) = LOW
- * SW5.1 (NAND_BOOTn) = HIGH */
- pinctrl-single,pins = <
- 0x0 (PIN_INPUT | MUX_MODE0) /* gpmc_ad0 */
- 0x4 (PIN_INPUT | MUX_MODE0) /* gpmc_ad1 */
- 0x8 (PIN_INPUT | MUX_MODE0) /* gpmc_ad2 */
- 0xc (PIN_INPUT | MUX_MODE0) /* gpmc_ad3 */
- 0x10 (PIN_INPUT | MUX_MODE0) /* gpmc_ad4 */
- 0x14 (PIN_INPUT | MUX_MODE0) /* gpmc_ad5 */
- 0x18 (PIN_INPUT | MUX_MODE0) /* gpmc_ad6 */
- 0x1c (PIN_INPUT | MUX_MODE0) /* gpmc_ad7 */
- 0x20 (PIN_INPUT | MUX_MODE0) /* gpmc_ad8 */
- 0x24 (PIN_INPUT | MUX_MODE0) /* gpmc_ad9 */
- 0x28 (PIN_INPUT | MUX_MODE0) /* gpmc_ad10 */
- 0x2c (PIN_INPUT | MUX_MODE0) /* gpmc_ad11 */
- 0x30 (PIN_INPUT | MUX_MODE0) /* gpmc_ad12 */
- 0x34 (PIN_INPUT | MUX_MODE0) /* gpmc_ad13 */
- 0x38 (PIN_INPUT | MUX_MODE0) /* gpmc_ad14 */
- 0x3c (PIN_INPUT | MUX_MODE0) /* gpmc_ad15 */
- 0xd8 (PIN_INPUT_PULLUP | MUX_MODE0) /* gpmc_wait0 */
- 0xcc (PIN_OUTPUT | MUX_MODE0) /* gpmc_wen */
- 0xb4 (PIN_OUTPUT_PULLUP | MUX_MODE0) /* gpmc_csn0 */
- 0xc4 (PIN_OUTPUT | MUX_MODE0) /* gpmc_advn_ale */
- 0xc8 (PIN_OUTPUT | MUX_MODE0) /* gpmc_oen_ren */
- 0xd0 (PIN_OUTPUT | MUX_MODE0) /* gpmc_be0n_cle */
- >;
- };
-
- cpsw_default: cpsw_default {
- pinctrl-single,pins = <
- /* Slave 1 */
- 0x250 (PIN_OUTPUT | MUX_MODE0) /* rgmii0_txc.rgmii0_txc */
- 0x254 (PIN_OUTPUT | MUX_MODE0) /* rgmii0_txctl.rgmii0_txctl */
- 0x258 (PIN_OUTPUT | MUX_MODE0) /* rgmii0_td3.rgmii0_txd3 */
- 0x25c (PIN_OUTPUT | MUX_MODE0) /* rgmii0_txd2.rgmii0_txd2 */
- 0x260 (PIN_OUTPUT | MUX_MODE0) /* rgmii0_txd1.rgmii0_txd1 */
- 0x264 (PIN_OUTPUT | MUX_MODE0) /* rgmii0_txd0.rgmii0_txd0 */
- 0x268 (PIN_INPUT | MUX_MODE0) /* rgmii0_rxc.rgmii0_rxc */
- 0x26c (PIN_INPUT | MUX_MODE0) /* rgmii0_rxctl.rgmii0_rxctl */
- 0x270 (PIN_INPUT | MUX_MODE0) /* rgmii0_rxd3.rgmii0_rxd3 */
- 0x274 (PIN_INPUT | MUX_MODE0) /* rgmii0_rxd2.rgmii0_rxd2 */
- 0x278 (PIN_INPUT | MUX_MODE0) /* rgmii0_rxd1.rgmii0_rxd1 */
- 0x27c (PIN_INPUT | MUX_MODE0) /* rgmii0_rxd0.rgmii0_rxd0 */
-
- /* Slave 2 */
- 0x198 (PIN_OUTPUT | MUX_MODE3) /* vin2a_d12.rgmii1_txc */
- 0x19c (PIN_OUTPUT | MUX_MODE3) /* vin2a_d13.rgmii1_tctl */
- 0x1a0 (PIN_OUTPUT | MUX_MODE3) /* vin2a_d14.rgmii1_td3 */
- 0x1a4 (PIN_OUTPUT | MUX_MODE3) /* vin2a_d15.rgmii1_td2 */
- 0x1a8 (PIN_OUTPUT | MUX_MODE3) /* vin2a_d16.rgmii1_td1 */
- 0x1ac (PIN_OUTPUT | MUX_MODE3) /* vin2a_d17.rgmii1_td0 */
- 0x1b0 (PIN_INPUT | MUX_MODE3) /* vin2a_d18.rgmii1_rclk */
- 0x1b4 (PIN_INPUT | MUX_MODE3) /* vin2a_d19.rgmii1_rctl */
- 0x1b8 (PIN_INPUT | MUX_MODE3) /* vin2a_d20.rgmii1_rd3 */
- 0x1bc (PIN_INPUT | MUX_MODE3) /* vin2a_d21.rgmii1_rd2 */
- 0x1c0 (PIN_INPUT | MUX_MODE3) /* vin2a_d22.rgmii1_rd1 */
- 0x1c4 (PIN_INPUT | MUX_MODE3) /* vin2a_d23.rgmii1_rd0 */
- >;
-
- };
-
- cpsw_sleep: cpsw_sleep {
- pinctrl-single,pins = <
- /* Slave 1 */
- 0x250 (MUX_MODE15)
- 0x254 (MUX_MODE15)
- 0x258 (MUX_MODE15)
- 0x25c (MUX_MODE15)
- 0x260 (MUX_MODE15)
- 0x264 (MUX_MODE15)
- 0x268 (MUX_MODE15)
- 0x26c (MUX_MODE15)
- 0x270 (MUX_MODE15)
- 0x274 (MUX_MODE15)
- 0x278 (MUX_MODE15)
- 0x27c (MUX_MODE15)
-
- /* Slave 2 */
- 0x198 (MUX_MODE15)
- 0x19c (MUX_MODE15)
- 0x1a0 (MUX_MODE15)
- 0x1a4 (MUX_MODE15)
- 0x1a8 (MUX_MODE15)
- 0x1ac (MUX_MODE15)
- 0x1b0 (MUX_MODE15)
- 0x1b4 (MUX_MODE15)
- 0x1b8 (MUX_MODE15)
- 0x1bc (MUX_MODE15)
- 0x1c0 (MUX_MODE15)
- 0x1c4 (MUX_MODE15)
- >;
- };
-
- davinci_mdio_default: davinci_mdio_default {
+ dcan1_pins_default: dcan1_pins_default {
pinctrl-single,pins = <
- 0x23c (PIN_OUTPUT_PULLUP | MUX_MODE0) /* mdio_d.mdio_d */
- 0x240 (PIN_INPUT_PULLUP | MUX_MODE0) /* mdio_clk.mdio_clk */
+ DRA7XX_CORE_IOPAD(0x37d0, PIN_OUTPUT_PULLUP | MUX_MODE0) /* dcan1_tx */
+ DRA7XX_CORE_IOPAD(0x3818, PULL_UP | MUX_MODE1) /* wakeup0.dcan1_rx */
>;
};
- davinci_mdio_sleep: davinci_mdio_sleep {
+ dcan1_pins_sleep: dcan1_pins_sleep {
pinctrl-single,pins = <
- 0x23c (MUX_MODE15)
- 0x240 (MUX_MODE15)
+ DRA7XX_CORE_IOPAD(0x37d0, MUX_MODE15 | PULL_UP) /* dcan1_tx.off */
+ DRA7XX_CORE_IOPAD(0x3818, MUX_MODE15 | PULL_UP) /* wakeup0.off */
>;
};
- dcan1_pins_default: dcan1_pins_default {
+ mmc1_pins_default: mmc1_pins_default {
pinctrl-single,pins = <
- 0x3d0 (PIN_OUTPUT_PULLUP | MUX_MODE0) /* dcan1_tx */
- 0x418 (PULL_UP | MUX_MODE1) /* wakeup0.dcan1_rx */
+ DRA7XX_CORE_IOPAD(0x376c, PIN_INPUT | MUX_MODE14) /* mmc1sdcd.gpio219 */
+ DRA7XX_CORE_IOPAD(0x3754, PIN_INPUT_PULLUP | MUX_MODE0) /* mmc1_clk.clk */
+ DRA7XX_CORE_IOPAD(0x3758, PIN_INPUT_PULLUP | MUX_MODE0) /* mmc1_cmd.cmd */
+ DRA7XX_CORE_IOPAD(0x375c, PIN_INPUT_PULLUP | MUX_MODE0) /* mmc1_dat0.dat0 */
+ DRA7XX_CORE_IOPAD(0x3760, PIN_INPUT_PULLUP | MUX_MODE0) /* mmc1_dat1.dat1 */
+ DRA7XX_CORE_IOPAD(0x3764, PIN_INPUT_PULLUP | MUX_MODE0) /* mmc1_dat2.dat2 */
+ DRA7XX_CORE_IOPAD(0x3768, PIN_INPUT_PULLUP | MUX_MODE0) /* mmc1_dat3.dat3 */
>;
};
- dcan1_pins_sleep: dcan1_pins_sleep {
+ mmc2_pins_default: mmc2_pins_default {
pinctrl-single,pins = <
- 0x3d0 (MUX_MODE15 | PULL_UP) /* dcan1_tx.off */
- 0x418 (MUX_MODE15 | PULL_UP) /* wakeup0.off */
+ DRA7XX_CORE_IOPAD(0x349c, PIN_INPUT_PULLUP | MUX_MODE1) /* gpmc_a23.mmc2_clk */
+ DRA7XX_CORE_IOPAD(0x34b0, PIN_INPUT_PULLUP | MUX_MODE1) /* gpmc_cs1.mmc2_cmd */
+ DRA7XX_CORE_IOPAD(0x34a0, PIN_INPUT_PULLUP | MUX_MODE1) /* gpmc_a24.mmc2_dat0 */
+ DRA7XX_CORE_IOPAD(0x34a4, PIN_INPUT_PULLUP | MUX_MODE1) /* gpmc_a25.mmc2_dat1 */
+ DRA7XX_CORE_IOPAD(0x34a8, PIN_INPUT_PULLUP | MUX_MODE1) /* gpmc_a26.mmc2_dat2 */
+ DRA7XX_CORE_IOPAD(0x34ac, PIN_INPUT_PULLUP | MUX_MODE1) /* gpmc_a27.mmc2_dat3 */
+ DRA7XX_CORE_IOPAD(0x348c, PIN_INPUT_PULLUP | MUX_MODE1) /* gpmc_a19.mmc2_dat4 */
+ DRA7XX_CORE_IOPAD(0x3490, PIN_INPUT_PULLUP | MUX_MODE1) /* gpmc_a20.mmc2_dat5 */
+ DRA7XX_CORE_IOPAD(0x3494, PIN_INPUT_PULLUP | MUX_MODE1) /* gpmc_a21.mmc2_dat6 */
+ DRA7XX_CORE_IOPAD(0x3498, PIN_INPUT_PULLUP | MUX_MODE1) /* gpmc_a22.mmc2_dat7 */
>;
};
};
&i2c1 {
status = "okay";
- pinctrl-names = "default";
- pinctrl-0 = <&i2c1_pins>;
clock-frequency = <400000>;
tps659038: tps659038@58 {
compatible = "ti,tps659038";
reg = <0x58>;
+ ti,palmas-override-powerhold;
+ ti,system-power-controller;
tps659038_pmic {
compatible = "ti,tps659038-pmic";
/* VDD_DSPEVE */
regulator-name = "smps45";
regulator-min-microvolt = < 850000>;
- regulator-max-microvolt = <1150000>;
+ regulator-max-microvolt = <1250000>;
regulator-always-on;
regulator-boot-on;
};
/* CORE_VDD */
regulator-name = "smps7";
regulator-min-microvolt = <850000>;
- regulator-max-microvolt = <1060000>;
+ regulator-max-microvolt = <1150000>;
regulator-always-on;
regulator-boot-on;
};
regulator-name = "ldo1";
regulator-min-microvolt = <1800000>;
regulator-max-microvolt = <3300000>;
+ regulator-always-on;
regulator-boot-on;
};
regulator-max-microvolt = <1050000>;
regulator-always-on;
regulator-boot-on;
+ regulator-allow-bypass;
};
ldoln_reg: ldoln {
regulator-max-microvolt = <3300000>;
regulator-boot-on;
};
+
+ /* REGEN1 is unused */
+
+ regen2: regen2 {
+ /* Needed for PMIC internal resources */
+ regulator-name = "regen2";
+ regulator-boot-on;
+ regulator-always-on;
+ };
+
+ /* REGEN3 is unused */
+
+ sysen1: sysen1 {
+ /* PMIC_REGEN_3V3 */
+ regulator-name = "sysen1";
+ regulator-boot-on;
+ regulator-always-on;
+ };
+
+ sysen2: sysen2 {
+ /* PMIC_REGEN_DDR */
+ regulator-name = "sysen2";
+ regulator-boot-on;
+ regulator-always-on;
+ };
};
};
};
+ pcf_lcd: gpio@20 {
+ compatible = "ti,pcf8575", "nxp,pcf8575";
+ reg = <0x20>;
+ gpio-controller;
+ #gpio-cells = <2>;
+ interrupt-parent = <&gpio6>;
+ interrupts = <11 IRQ_TYPE_EDGE_FALLING>;
+ interrupt-controller;
+ #interrupt-cells = <2>;
+ };
+
pcf_gpio_21: gpio@21 {
- compatible = "ti,pcf8575";
+ compatible = "ti,pcf8575", "nxp,pcf8575";
reg = <0x21>;
lines-initial-states = <0x1408>;
gpio-controller;
#interrupt-cells = <2>;
};
+ tlv320aic3106: tlv320aic3106@19 {
+ #sound-dai-cells = <0>;
+ compatible = "ti,tlv320aic3106";
+ reg = <0x19>;
+ adc-settle-ms = <40>;
+ ai3x-micbias-vg = <1>; /* 2.0V */
+ status = "okay";
+
+ /* Regulators */
+ AVDD-supply = <&evm_3v3_sw>;
+ IOVDD-supply = <&evm_3v3_sw>;
+ DRVDD-supply = <&evm_3v3_sw>;
+ DVDD-supply = <&aic_dvdd>;
+ };
};
&i2c2 {
status = "okay";
- pinctrl-names = "default";
- pinctrl-0 = <&i2c2_pins>;
- clock-frequency = <400000>;
-};
-
-&i2c3 {
- status = "okay";
- pinctrl-names = "default";
- pinctrl-0 = <&i2c3_pins>;
clock-frequency = <400000>;
-};
-
-&mcspi1 {
- status = "okay";
- pinctrl-names = "default";
- pinctrl-0 = <&mcspi1_pins>;
-};
-
-&mcspi2 {
- status = "okay";
- pinctrl-names = "default";
- pinctrl-0 = <&mcspi2_pins>;
-};
-
-&uart1 {
- status = "okay";
- pinctrl-names = "default";
- pinctrl-0 = <&uart1_pins>;
- interrupts-extended = <&crossbar_mpu GIC_SPI 67 IRQ_TYPE_LEVEL_HIGH>,
- <&dra7_pmx_core 0x3e0>;
-};
-&uart2 {
- status = "okay";
- pinctrl-names = "default";
- pinctrl-0 = <&uart2_pins>;
-};
-
-&uart3 {
- status = "okay";
- pinctrl-names = "default";
- pinctrl-0 = <&uart3_pins>;
+ pcf_hdmi: gpio@26 {
+ compatible = "ti,pcf8575", "nxp,pcf8575";
+ reg = <0x26>;
+ gpio-controller;
+ #gpio-cells = <2>;
+ p1 {
+ /* vin6_sel_s0: high: VIN6, low: audio */
+ gpio-hog;
+ gpios = <1 GPIO_ACTIVE_HIGH>;
+ output-low;
+ line-name = "vin6_sel_s0";
+ };
+ };
};
&mmc1 {
status = "okay";
- vmmc-supply = <&ldo1_reg>;
+ vmmc-supply = <&evm_3v3_sd>;
+ vqmmc-supply = <&ldo1_reg>;
bus-width = <4>;
/*
* SDCD signal is not being used here - using the fact that GPIO mode
* is always hardwired.
*/
cd-gpios = <&gpio6 27 GPIO_ACTIVE_LOW>;
+ pinctrl-names = "default", "hs", "sdr12", "sdr25", "sdr50", "ddr50-rev11", "sdr104-rev11", "ddr50", "sdr104";
+ pinctrl-0 = <&mmc1_pins_default>;
+ pinctrl-1 = <&mmc1_pins_hs>;
+ pinctrl-2 = <&mmc1_pins_sdr12>;
+ pinctrl-3 = <&mmc1_pins_sdr25>;
+ pinctrl-4 = <&mmc1_pins_sdr50>;
+ pinctrl-5 = <&mmc1_pins_ddr50 &mmc1_iodelay_ddr_rev11_conf>;
+ pinctrl-6 = <&mmc1_pins_sdr104 &mmc1_iodelay_sdr104_rev11_conf>;
+ pinctrl-7 = <&mmc1_pins_ddr50 &mmc1_iodelay_ddr_rev20_conf>;
+ pinctrl-8 = <&mmc1_pins_sdr104 &mmc1_iodelay_sdr104_rev20_conf>;
};
&mmc2 {
status = "okay";
- vmmc-supply = <&mmc2_3v3>;
+ vmmc-supply = <&evm_1v8_sw>;
bus-width = <8>;
+ pinctrl-names = "default", "hs", "ddr_1_8v-rev11", "ddr_1_8v", "hs200_1_8v-rev11", "hs200_1_8v";
+ pinctrl-0 = <&mmc2_pins_default>;
+ pinctrl-1 = <&mmc2_pins_hs>;
+ pinctrl-2 = <&mmc2_pins_ddr_1_8v_rev11 &mmc2_iodelay_ddr_1_8v_rev11_conf>;
+ pinctrl-3 = <&mmc2_pins_ddr_rev20>;
+ pinctrl-4 = <&mmc2_pins_hs200 &mmc2_iodelay_hs200_rev11_conf>;
+ pinctrl-5 = <&mmc2_pins_hs200 &mmc2_iodelay_hs200_rev20_conf>;
};
&cpu0 {
cpu0-supply = <&smps123_reg>;
};
-&qspi {
- status = "okay";
- pinctrl-names = "default";
- pinctrl-0 = <&qspi1_pins>;
-
- spi-max-frequency = <64000000>;
- m25p80@0 {
- compatible = "s25fl256s1","spi-flash";
- spi-max-frequency = <64000000>;
- reg = <0>;
- spi-tx-bus-width = <1>;
- spi-rx-bus-width = <4>;
- #address-cells = <1>;
- #size-cells = <1>;
-
- /* MTD partition table.
- * The ROM checks the first four physical blocks
- * for a valid file to boot and the flash here is
- * 64KiB block size.
- */
- partition@0 {
- label = "QSPI.SPL";
- reg = <0x00000000 0x000010000>;
- };
- partition@1 {
- label = "QSPI.SPL.backup1";
- reg = <0x00010000 0x00010000>;
- };
- partition@2 {
- label = "QSPI.SPL.backup2";
- reg = <0x00020000 0x00010000>;
- };
- partition@3 {
- label = "QSPI.SPL.backup3";
- reg = <0x00030000 0x00010000>;
- };
- partition@4 {
- label = "QSPI.u-boot";
- reg = <0x00040000 0x00100000>;
- };
- partition@5 {
- label = "QSPI.u-boot-spl-os";
- reg = <0x00140000 0x00080000>;
- };
- partition@6 {
- label = "QSPI.u-boot-env";
- reg = <0x001c0000 0x00010000>;
- };
- partition@7 {
- label = "QSPI.u-boot-env.backup1";
- reg = <0x001d0000 0x0010000>;
- };
- partition@8 {
- label = "QSPI.kernel";
- reg = <0x001e0000 0x0800000>;
- };
- partition@9 {
- label = "QSPI.file-system";
- reg = <0x009e0000 0x01620000>;
- };
- };
-};
-
-&omap_dwc3_1 {
- extcon = <&extcon_usb1>;
-};
-
&omap_dwc3_2 {
extcon = <&extcon_usb2>;
};
-&usb1 {
- dr_mode = "peripheral";
- pinctrl-names = "default";
- pinctrl-0 = <&usb1_pins>;
-};
-
-&usb2 {
- dr_mode = "host";
- pinctrl-names = "default";
- pinctrl-0 = <&usb2_pins>;
-};
-
&elm {
status = "okay";
};
&gpmc {
- status = "okay";
- pinctrl-names = "default";
- pinctrl-0 = <&nand_flash_x16>;
- ranges = <0 0 0 0x01000000>; /* minimum GPMC partition = 16MB */
+ /*
+ * For the existing IOdelay configuration via U-Boot we don't
+ * support NAND on dra7-evm. Keep it disabled. Enabling it
+ * requires a different configuration by U-Boot.
+ */
+ status = "disabled";
+ ranges = <0 0 0x08000000 0x01000000>; /* minimum GPMC partition = 16MB */
nand@0,0 {
+ compatible = "ti,omap2-nand";
reg = <0 0 4>; /* device IO registers */
+ interrupt-parent = <&gpmc>;
+ interrupts = <0 IRQ_TYPE_NONE>, /* fifoevent */
+ <1 IRQ_TYPE_NONE>; /* termcount */
+ rb-gpios = <&gpmc 0 GPIO_ACTIVE_HIGH>; /* gpmc_wait0 pin */
+ ti,nand-xfer-type = "prefetch-dma";
ti,nand-ecc-opt = "bch8";
ti,elm-id = <&elm>;
nand-bus-width = <16>;
gpmc,bus-turnaround-ns = <0>;
gpmc,cycle2cycle-delay-ns = <0>;
gpmc,clk-activation-ns = <0>;
- gpmc,wait-monitoring-ns = <0>;
gpmc,wr-data-mux-bus-ns = <0>;
/* MTD partition table */
/* All SPL-* partitions are sized to minimal length
&mac {
status = "okay";
- pinctrl-names = "default", "sleep";
- pinctrl-0 = <&cpsw_default>;
- pinctrl-1 = <&cpsw_sleep>;
dual_emac;
};
&cpsw_emac0 {
- phy_id = <&davinci_mdio>, <2>;
+ phy-handle = <ðphy0>;
phy-mode = "rgmii";
dual_emac_res_vlan = <1>;
};
&cpsw_emac1 {
- phy_id = <&davinci_mdio>, <3>;
+ phy-handle = <ðphy1>;
phy-mode = "rgmii";
dual_emac_res_vlan = <2>;
};
&davinci_mdio {
- pinctrl-names = "default", "sleep";
- pinctrl-0 = <&davinci_mdio_default>;
- pinctrl-1 = <&davinci_mdio_sleep>;
+ ethphy0: ethernet-phy@2 {
+ reg = <2>;
+ };
+
+ ethphy1: ethernet-phy@3 {
+ reg = <3>;
+ };
};
&dcan1 {
pinctrl-1 = <&dcan1_pins_sleep>;
pinctrl-2 = <&dcan1_pins_default>;
};
+
+&pcie1_rc {
+ status = "okay";
+};
projects / oweals / u-boot.git / blobdiff