ARM: dts: rockchip: Add regulators for rk3288-vyasa

[oweals/u-boot.git] / arch / arm / dts / armada-3720-db.dts

diff --git a/arch/arm/dts/armada-3720-db.dts b/arch/arm/dts/armada-3720-db.dts
index 86110a6ae33095ac5af652a80052ac566b5f9c7b..5f06252e4e24a55207b0801bc3c6d9e643362675 100644 (file)
--- a/arch/arm/dts/armada-3720-db.dts
+++ b/arch/arm/dts/armada-3720-db.dts
@@ -56,19 +56,93 @@
                stdout-path = "serial0:115200n8";
        };
 
+       aliases {
+               ethernet0 = &eth0;
+               i2c0 = &i2c0;
+               spi0 = &spi0;
+       };
+
        memory {
                device_type = "memory";
                reg = <0x00000000 0x00000000 0x00000000 0x20000000>;
        };
 };
 
+&comphy {
+       phy0 {
+               phy-type = <PHY_TYPE_PEX0>;
+               phy-speed = <PHY_SPEED_2_5G>;
+       };
+
+       phy1 {
+               phy-type = <PHY_TYPE_USB3_HOST0>;
+               phy-speed = <PHY_SPEED_5G>;
+       };
+};
+
+&eth0 {
+       pinctrl-names = "default";
+       pinctrl-0 = <&rgmii_pins>;
+       status = "okay";
+       phy-mode = "rgmii";
+};
+
+&i2c0 {
+       pinctrl-names = "default";
+       pinctrl-0 = <&i2c1_pins>;
+       status = "okay";
+};
+
 /* CON3 */
 &sata {
        status = "okay";
 };
 
+&sdhci0 {
+       bus-width = <4>;
+       status = "okay";
+};
+
+&sdhci1 {
+       non-removable;
+       bus-width = <8>;
+       mmc-ddr-1_8v;
+       mmc-hs400-1_8v;
+       marvell,pad-type = "fixed-1-8v";
+       status = "okay";
+
+       #address-cells = <1>;
+       #size-cells = <0>;
+       mmccard: mmccard@0 {
+               compatible = "mmc-card";
+               reg = <0>;
+       };
+};
+
+&spi0 {
+       status = "okay";
+       pinctrl-names = "default";
+       pinctrl-0 = <&spi_quad_pins>;
+
+       spi-flash@0 {
+               #address-cells = <1>;
+               #size-cells = <1>;
+               compatible = "st,m25p128", "spi-flash";
+               reg = <0>; /* Chip select 0 */
+               spi-max-frequency = <50000000>;
+               m25p,fast-read;
+       };
+};
+
 /* Exported on the micro USB connector CON32 through an FTDI */
 &uart0 {
+       pinctrl-names = "default";
+       pinctrl-0 = <&uart1_pins>;
+       status = "okay";
+};
+
+/* CON29 */
+&usb2 {
        status = "okay";
 };