rockchip: dts: rk3399: nanopi4: Use CD pin as RK_FUNC_1

[oweals/u-boot.git] / arch / arm / dts / am572x-idk.dts

diff --git a/arch/arm/dts/am572x-idk.dts b/arch/arm/dts/am572x-idk.dts
index b3405510d318bbed07cd8a418c6f34bd58056018..9212931f25db0597706036d36c46ee79c95c8867 100644 (file)
--- a/arch/arm/dts/am572x-idk.dts
+++ b/arch/arm/dts/am572x-idk.dts
@@ -9,81 +9,30 @@
 /dts-v1/;
 
 #include "dra74x.dtsi"
-#include <dt-bindings/gpio/gpio.h>
-#include <dt-bindings/interrupt-controller/irq.h>
+#include "am572x-idk-common.dtsi"
 #include "am57xx-idk-common.dtsi"
+#include "dra74x-mmc-iodelay.dtsi"
 
 / {
        model = "TI AM5728 IDK";
        compatible = "ti,am5728-idk", "ti,am5728", "ti,dra742", "ti,dra74",
                     "ti,dra7";
-
-       chosen {
-               stdout-path = &uart3;
-       };
-
-       memory {
-               device_type = "memory";
-               reg = <0x0 0x80000000 0x0 0x80000000>;
-       };
-
-       extcon_usb2: extcon_usb2 {
-               compatible = "linux,extcon-usb-gpio";
-               id-gpio = <&gpio3 16 GPIO_ACTIVE_HIGH>;
-       };
-
-       status-leds {
-               compatible = "gpio-leds";
-               cpu0-led {
-                       label = "status0:red:cpu0";
-                       gpios = <&gpio4 0 GPIO_ACTIVE_HIGH>;
-                       default-state = "off";
-                       linux,default-trigger = "cpu0";
-               };
-
-               usr0-led {
-                       label = "status0:green:usr";
-                       gpios = <&gpio3 11 GPIO_ACTIVE_HIGH>;
-                       default-state = "off";
-               };
-
-               heartbeat-led {
-                       label = "status0:blue:heartbeat";
-                       gpios = <&gpio3 12 GPIO_ACTIVE_HIGH>;
-                       default-state = "off";
-                       linux,default-trigger = "heartbeat";
-               };
-
-               cpu1-led {
-                       label = "status1:red:cpu1";
-                       gpios = <&gpio3 10 GPIO_ACTIVE_HIGH>;
-                       default-state = "off";
-                       linux,default-trigger = "cpu1";
-               };
-
-               usr1-led {
-                       label = "status1:green:usr";
-                       gpios = <&gpio7 23 GPIO_ACTIVE_HIGH>;
-                       default-state = "off";
-               };
-
-               mmc0-led {
-                       label = "status1:blue:mmc0";
-                       gpios = <&gpio7 22 GPIO_ACTIVE_HIGH>;
-                       default-state = "off";
-                       linux,default-trigger = "mmc0";
-               };
-       };
 };
 
-&omap_dwc3_2 {
-       extcon = <&extcon_usb2>;
+&mmc1 {
+       pinctrl-names = "default", "hs", "sdr12", "sdr25", "sdr50", "ddr50", "sdr104";
+       pinctrl-0 = <&mmc1_pins_default>;
+       pinctrl-1 = <&mmc1_pins_hs>;
+       pinctrl-2 = <&mmc1_pins_sdr12>;
+       pinctrl-3 = <&mmc1_pins_sdr25>;
+       pinctrl-4 = <&mmc1_pins_sdr50>;
+       pinctrl-5 = <&mmc1_pins_ddr50 &mmc1_iodelay_ddr_rev20_conf>;
+       pinctrl-6 = <&mmc1_pins_sdr104 &mmc1_iodelay_sdr104_rev20_conf>;
 };
 
-&mmc1 {
-       status = "okay";
-       vmmc-supply = <&v3_3d>;
-       vmmc_aux-supply = <&ldo1_reg>;
-       bus-width = <4>;
-       cd-gpios = <&gpio6 27 GPIO_ACTIVE_LOW>; /* gpio 219 */
+&mmc2 {
+       pinctrl-names = "default", "hs", "ddr_1_8v";
+       pinctrl-0 = <&mmc2_pins_default>;
+       pinctrl-1 = <&mmc2_pins_hs>;
+       pinctrl-2 = <&mmc2_pins_ddr_rev20>;
 };