DTS: Provide USB host DTS description for i.MX53 devices

[oweals/u-boot.git] / arch / arm / dts / am571x-idk.dts

diff --git a/arch/arm/dts/am571x-idk.dts b/arch/arm/dts/am571x-idk.dts
index ac69bb0616586ee784ad6174b4f18e2b9c4cb446..debf9464403ef52a5c4b7e27135b1a5ed5778fd2 100644 (file)
--- a/arch/arm/dts/am571x-idk.dts
+++ b/arch/arm/dts/am571x-idk.dts
@@ -11,6 +11,7 @@
 #include <dt-bindings/gpio/gpio.h>
 #include <dt-bindings/interrupt-controller/irq.h>
 #include "am57xx-idk-common.dtsi"
+#include "dra72x-mmc-iodelay.dtsi"
 
 / {
        model = "TI AM5718 IDK";
@@ -62,20 +63,57 @@
                        linux,default-trigger = "mmc0";
                };
        };
+};
+
+&omap_dwc3_2 {
+       extcon = <&extcon_usb2>;
+};
 
-       extcon_usb2: extcon_usb2 {
-            compatible = "linux,extcon-usb-gpio";
-            id-gpio = <&gpio5 7 GPIO_ACTIVE_HIGH>;
+&extcon_usb2 {
+       id-gpio = <&gpio5 7 GPIO_ACTIVE_HIGH>;
+       vbus-gpio = <&gpio7 22 GPIO_ACTIVE_HIGH>;
+};
+
+&mailbox5 {
+       status = "okay";
+       mbox_ipu1_ipc3x: mbox_ipu1_ipc3x {
+               status = "okay";
+       };
+       mbox_dsp1_ipc3x: mbox_dsp1_ipc3x {
+               status = "okay";
        };
 };
 
-&mmc1 {
+&mailbox6 {
        status = "okay";
-       vmmc-supply = <&ldo1_reg>;
-       bus-width = <4>;
-       cd-gpios = <&gpio6 27 GPIO_ACTIVE_LOW>; /* gpio 219 */
+       mbox_ipu2_ipc3x: mbox_ipu2_ipc3x {
+               status = "okay";
+       };
 };
 
-&omap_dwc3_2 {
-       extcon = <&extcon_usb2>;
+&pcie1_rc {
+       status = "okay";
+       gpios = <&gpio3 23 GPIO_ACTIVE_HIGH>;
+};
+
+&pcie1_ep {
+       gpios = <&gpio3 23 GPIO_ACTIVE_HIGH>;
+};
+
+&mmc1 {
+       pinctrl-names = "default", "hs", "sdr12", "sdr25", "sdr50", "ddr50", "sdr104";
+       pinctrl-0 = <&mmc1_pins_default>;
+       pinctrl-1 = <&mmc1_pins_hs>;
+       pinctrl-2 = <&mmc1_pins_sdr12>;
+       pinctrl-3 = <&mmc1_pins_sdr25>;
+       pinctrl-4 = <&mmc1_pins_sdr50>;
+       pinctrl-5 = <&mmc1_pins_ddr50_rev20 &mmc1_iodelay_ddr50_conf>;
+       pinctrl-6 = <&mmc1_pins_sdr104 &mmc1_iodelay_sdr104_rev20_conf>;
+};
+
+&mmc2 {
+       pinctrl-names = "default", "hs", "ddr_1_8v";
+       pinctrl-0 = <&mmc2_pins_default>;
+       pinctrl-1 = <&mmc2_pins_hs>;
+       pinctrl-2 = <&mmc2_pins_ddr_rev20 &mmc2_iodelay_ddr_conf>;
 };