#include <stdio_dev.h>
#include <lcd.h>
#include <asm/arch/pxa-regs.h>
+#include <asm/io.h>
/* #define DEBUG */
/*----------------------------------------------------------------------*/
+#ifdef CONFIG_ACX517AKN
+
+# define LCD_BPP LCD_COLOR8
+
+/* you have to set lccr0 and lccr3 (including pcd) */
+# define REG_LCCR0 0x003008f9
+# define REG_LCCR3 0x03700006
+
+vidinfo_t panel_info = {
+ .vl_col = 320,
+ .vl_row = 320,
+ .vl_width = 320,
+ .vl_height = 320,
+ .vl_clkp = CONFIG_SYS_HIGH,
+ .vl_oep = CONFIG_SYS_LOW,
+ .vl_hsp = CONFIG_SYS_LOW,
+ .vl_vsp = CONFIG_SYS_LOW,
+ .vl_dp = CONFIG_SYS_HIGH,
+ .vl_bpix = LCD_BPP,
+ .vl_lbw = 0,
+ .vl_splt = 1,
+ .vl_clor = 1,
+ .vl_tft = 1,
+ .vl_hpw = 0x04,
+ .vl_blw = 0x1c,
+ .vl_elw = 0x08,
+ .vl_vpw = 0x01,
+ .vl_bfw = 0x07,
+ .vl_efw = 0x08,
+};
+#endif /* CONFIG_ACX517AKN */
+
+/*----------------------------------------------------------------------*/
+
+#ifdef CONFIG_LQ038J7DH53
+
+# define LCD_BPP LCD_COLOR8
+
+/* you have to set lccr0 and lccr3 (including pcd) */
+# define REG_LCCR0 0x003008f9
+# define REG_LCCR3 0x03700004
+
+vidinfo_t panel_info = {
+ .vl_col = 320,
+ .vl_row = 480,
+ .vl_width = 320,
+ .vl_height = 480,
+ .vl_clkp = CONFIG_SYS_HIGH,
+ .vl_oep = CONFIG_SYS_LOW,
+ .vl_hsp = CONFIG_SYS_LOW,
+ .vl_vsp = CONFIG_SYS_LOW,
+ .vl_dp = CONFIG_SYS_HIGH,
+ .vl_bpix = LCD_BPP,
+ .vl_lbw = 0,
+ .vl_splt = 1,
+ .vl_clor = 1,
+ .vl_tft = 1,
+ .vl_hpw = 0x04,
+ .vl_blw = 0x20,
+ .vl_elw = 0x01,
+ .vl_vpw = 0x01,
+ .vl_bfw = 0x04,
+ .vl_efw = 0x01,
+};
+#endif /* CONFIG_ACX517AKN */
+
+/*----------------------------------------------------------------------*/
+
+#ifdef CONFIG_LITTLETON_LCD
+# define LCD_BPP LCD_COLOR8
+
+/* you have to set lccr0 and lccr3 (including pcd) */
+# define REG_LCCR0 0x003008f8
+# define REG_LCCR3 0x0300FF04
+
+vidinfo_t panel_info = {
+ .vl_col = 480,
+ .vl_row = 640,
+ .vl_width = 480,
+ .vl_height = 640,
+ .vl_clkp = CONFIG_SYS_HIGH,
+ .vl_oep = CONFIG_SYS_HIGH,
+ .vl_hsp = CONFIG_SYS_HIGH,
+ .vl_vsp = CONFIG_SYS_HIGH,
+ .vl_dp = CONFIG_SYS_HIGH,
+ .vl_bpix = LCD_BPP,
+ .vl_lbw = 0,
+ .vl_splt = 0,
+ .vl_clor = 0,
+ .vl_tft = 1,
+ .vl_hpw = 9,
+ .vl_blw = 8,
+ .vl_elw = 24,
+ .vl_vpw = 2,
+ .vl_bfw = 2,
+ .vl_efw = 4,
+};
+#endif /* CONFIG_LITTLETON_LCD */
+
+/*----------------------------------------------------------------------*/
+
#if LCD_BPP == LCD_COLOR8
void lcd_setcolreg (ushort regno, ushort red, ushort green, ushort blue);
#endif
{
debug("Setting GPIO for 4 bit data\n");
/* bits 58-61 */
- GPDR1 |= (0xf << 26);
- GAFR1_U = (GAFR1_U & ~(0xff << 20)) | (0xaa << 20);
+ writel(readl(GPDR1) | (0xf << 26), GPDR1);
+ writel((readl(GAFR1_U) & ~(0xff << 20)) | (0xaa << 20),
+ GAFR1_U);
/* bits 74-77 */
- GPDR2 |= (0xf << 10);
- GAFR2_L = (GAFR2_L & ~(0xff << 20)) | (0xaa << 20);
+ writel(readl(GPDR2) | (0xf << 10), GPDR2);
+ writel((readl(GAFR2_L) & ~(0xff << 20)) | (0xaa << 20),
+ GAFR2_L);
}
/* 8 bit interface */
{
debug("Setting GPIO for 8 bit data\n");
/* bits 58-65 */
- GPDR1 |= (0x3f << 26);
- GPDR2 |= (0x3);
+ writel(readl(GPDR1) | (0x3f << 26), GPDR1);
+ writel(readl(GPDR2) | (0x3), GPDR2);
- GAFR1_U = (GAFR1_U & ~(0xfff << 20)) | (0xaaa << 20);
- GAFR2_L = (GAFR2_L & ~0xf) | (0xa);
+ writel((readl(GAFR1_U) & ~(0xfff << 20)) | (0xaaa << 20),
+ GAFR1_U);
+ writel((readl(GAFR2_L) & ~0xf) | (0xa), GAFR2_L);
/* bits 74-77 */
- GPDR2 |= (0xf << 10);
- GAFR2_L = (GAFR2_L & ~(0xff << 20)) | (0xaa << 20);
+ writel(readl(GPDR2) | (0xf << 10), GPDR2);
+ writel((readl(GAFR2_L) & ~(0xff << 20)) | (0xaa << 20),
+ GAFR2_L);
}
/* 16 bit interface */
{
debug("Setting GPIO for 16 bit data\n");
/* bits 58-77 */
- GPDR1 |= (0x3f << 26);
- GPDR2 |= 0x00003fff;
+ writel(readl(GPDR1) | (0x3f << 26), GPDR1);
+ writel(readl(GPDR2) | 0x00003fff, GPDR2);
- GAFR1_U = (GAFR1_U & ~(0xfff << 20)) | (0xaaa << 20);
- GAFR2_L = (GAFR2_L & 0xf0000000) | 0x0aaaaaaa;
+ writel((readl(GAFR1_U) & ~(0xfff << 20)) | (0xaaa << 20),
+ GAFR1_U);
+ writel((readl(GAFR2_L) & 0xf0000000) | 0x0aaaaaaa, GAFR2_L);
}
else
{
debug("Enabling LCD controller\n");
/* Sequence from 11.7.10 */
- LCCR3 = vid->pxa.reg_lccr3;
- LCCR2 = vid->pxa.reg_lccr2;
- LCCR1 = vid->pxa.reg_lccr1;
- LCCR0 = vid->pxa.reg_lccr0 & ~LCCR0_ENB;
- FDADR0 = vid->pxa.fdadr0;
- FDADR1 = vid->pxa.fdadr1;
- LCCR0 |= LCCR0_ENB;
+ writel(vid->pxa.reg_lccr3, LCCR3);
+ writel(vid->pxa.reg_lccr2, LCCR2);
+ writel(vid->pxa.reg_lccr1, LCCR1);
+ writel(vid->pxa.reg_lccr0 & ~LCCR0_ENB, LCCR0);
+ writel(vid->pxa.fdadr0, FDADR0);
+ writel(vid->pxa.fdadr1, FDADR1);
+ writel(readl(LCCR0) | LCCR0_ENB, LCCR0);
#ifdef CONFIG_CPU_MONAHANS
- CKENA |= CKENA_1_LCD;
+ writel(readl(CKENA) | CKENA_1_LCD, CKENA);
#else
- CKEN |= CKEN16_LCD;
+ writel(readl(CKEN) | CKEN16_LCD, CKEN);
#endif
- debug("FDADR0 = 0x%08x\n", (unsigned int)FDADR0);
- debug("FDADR1 = 0x%08x\n", (unsigned int)FDADR1);
- debug("LCCR0 = 0x%08x\n", (unsigned int)LCCR0);
- debug("LCCR1 = 0x%08x\n", (unsigned int)LCCR1);
- debug("LCCR2 = 0x%08x\n", (unsigned int)LCCR2);
- debug("LCCR3 = 0x%08x\n", (unsigned int)LCCR3);
+ debug("FDADR0 = 0x%08x\n", readl(FDADR0));
+ debug("FDADR1 = 0x%08x\n", readl(FDADR1));
+ debug("LCCR0 = 0x%08x\n", readl(LCCR0));
+ debug("LCCR1 = 0x%08x\n", readl(LCCR1));
+ debug("LCCR2 = 0x%08x\n", readl(LCCR2));
+ debug("LCCR3 = 0x%08x\n", readl(LCCR3));
}
static int pxafb_init (vidinfo_t *vid)