arm64: zynqmp: Define routines for mmio write and read

[oweals/u-boot.git] / arch / arm / cpu / armv8 / zynqmp / Kconfig

diff --git a/arch/arm/cpu/armv8/zynqmp/Kconfig b/arch/arm/cpu/armv8/zynqmp/Kconfig
index ed3305d71821f3421f403eceddd4420ec045bc61..5ac48ebc4d1aa904b4af16a00844106fa1ab6293 100644 (file)
--- a/arch/arm/cpu/armv8/zynqmp/Kconfig
+++ b/arch/arm/cpu/armv8/zynqmp/Kconfig
@@ -1,9 +1,34 @@
 if ARCH_ZYNQMP
 
+config SPL_FAT_SUPPORT
+       default y
+
+config SPL_LIBCOMMON_SUPPORT
+       default y
+
+config SPL_LIBDISK_SUPPORT
+       default y
+
+config SPL_LIBGENERIC_SUPPORT
+       default y
+
+config SPL_MMC_SUPPORT
+       default y if MMC_SDHCI_ZYNQ
+
+config SPL_SERIAL_SUPPORT
+       default y
+
+config SPL_SPI_FLASH_SUPPORT
+       default y if ZYNQ_QSPI
+
+config SPL_SPI_SUPPORT
+       default y if ZYNQ_QSPI
+
 config SYS_BOARD
        default "zynqmp"
 
 config SYS_VENDOR
+       string "Vendor name"
        default "xilinx"
 
 config SYS_SOC
@@ -17,11 +42,75 @@ config SYS_CONFIG_NAME
          Based on this option include/configs/<CONFIG_SYS_CONFIG_NAME>.h header
          will be used for board configuration.
 
+config BOOT_INIT_FILE
+       string "boot.bin init register filename"
+       depends on SPL
+       default ""
+       help
+         Add register writes to boot.bin format (max 256 pairs).
+         Expect a table of register-value pairs, e.g. "0x12345678 0x4321"
+
 config ZYNQMP_USB
        bool "Configure ZynqMP USB"
 
 config SYS_MALLOC_F_LEN
        default 0x600
 
+config SPL_ZYNQMP_ALT_BOOTMODE_ENABLED
+       bool "Overwrite SPL bootmode"
+       depends on SPL
+       help
+         Overwrite bootmode selected via boot mode pins to tell SPL what should
+         be the next boot device.
+
+config SPL_ZYNQMP_ALT_BOOTMODE
+       hex
+       default 0x0 if JTAG_MODE
+       default 0x1 if QSPI_MODE_24BIT
+       default 0x2 if QSPI_MODE_32BIT
+       default 0x3 if SD_MODE
+       default 0x4 if NAND_MODE
+       default 0x5 if SD_MODE1
+       default 0x6 if EMMC_MODE
+       default 0x7 if USB_MODE
+       default 0xa if SW_USBHOST_MODE
+       default 0xb if SW_SATA_MODE
+
+choice
+       prompt "Boot mode"
+       depends on SPL_ZYNQMP_ALT_BOOTMODE_ENABLED
+       default JTAG
+
+config JTAG_MODE
+       bool "JTAG_MODE"
+
+config QSPI_MODE_24BIT
+       bool "QSPI_MODE_24BIT"
+
+config QSPI_MODE_32BIT
+       bool "QSPI_MODE_32BIT"
+
+config SD_MODE
+       bool "SD_MODE"
+
+config SD_MODE1
+       bool "SD_MODE1"
+
+config NAND_MODE
+       bool "NAND_MODE"
+
+config EMMC_MODE
+       bool "EMMC_MODE"
+
+config USB_MODE
+       bool "USB"
+
+config SW_USBHOST_MODE
+       bool "SW USBHOST_MODE"
+
+config SW_SATA_MODE
+       bool "SW SATA_MODE"
+
+endchoice
 
 endif