#include <linux/linkage.h>
#include <asm/gic.h>
#include <asm/macro.h>
+#include <asm/arch-fsl-layerscape/soc.h>
#ifdef CONFIG_MP
#include <asm/arch/mp.h>
#endif
#ifdef CONFIG_FSL_LSCH3
#include <asm/arch-fsl-layerscape/immap_lsch3.h>
-#include <asm/arch-fsl-layerscape/soc.h>
#endif
#include <asm/u-boot.h>
+/* Get GIC offset
+* For LS1043a rev1.0, GIC base address align with 4k.
+* For LS1043a rev1.1, if DCFG_GIC400_ALIGN[GIC_ADDR_BIT]
+* is set, GIC base address align with 4K, or else align
+* with 64k.
+* output:
+* x0: the base address of GICD
+* x1: the base address of GICC
+*/
+ENTRY(get_gic_offset)
+ ldr x0, =GICD_BASE
+#ifdef CONFIG_GICV2
+ ldr x1, =GICC_BASE
+#endif
+#ifdef CONFIG_HAS_FEATURE_GIC64K_ALIGN
+ ldr x2, =DCFG_CCSR_SVR
+ ldr w2, [x2]
+ rev w2, w2
+ mov w3, w2
+ ands w3, w3, #SVR_WO_E << 8
+ mov w4, #SVR_LS1043A << 8
+ cmp w3, w4
+ b.ne 1f
+ ands w2, w2, #0xff
+ cmp w2, #REV1_0
+ b.eq 1f
+ ldr x2, =SCFG_GIC400_ALIGN
+ ldr w2, [x2]
+ rev w2, w2
+ tbnz w2, #GIC_ADDR_BIT, 1f
+ ldr x0, =GICD_BASE_64K
+#ifdef CONFIG_GICV2
+ ldr x1, =GICC_BASE_64K
+#endif
+1:
+#endif
+ ret
+ENDPROC(get_gic_offset)
+
+ENTRY(smp_kick_all_cpus)
+ /* Kick secondary cpus up by SGI 0 interrupt */
+#if defined(CONFIG_GICV2) || defined(CONFIG_GICV3)
+ mov x29, lr /* Save LR */
+ bl get_gic_offset
+ bl gic_kick_secondary_cpus
+ mov lr, x29 /* Restore LR */
+#endif
+ ret
+ENDPROC(smp_kick_all_cpus)
+
+
ENTRY(lowlevel_init)
mov x29, lr /* Save LR */
#ifdef CONFIG_FSL_LSCH3
/* Set Wuo bit for RN-I 20 */
-#ifdef CONFIG_LS2080A
+#ifdef CONFIG_ARCH_LS2080A
ldr x0, =CCI_AUX_CONTROL_BASE(20)
ldr x1, =0x00000010
bl ccn504_set_aux
/* Initialize GIC Secure Bank Status */
#if defined(CONFIG_GICV2) || defined(CONFIG_GICV3)
branch_if_slave x0, 1f
- ldr x0, =GICD_BASE
+ bl get_gic_offset
bl gic_init_secure
1:
#ifdef CONFIG_GICV3
ldr x0, =GICR_BASE
bl gic_init_secure_percpu
#elif defined(CONFIG_GICV2)
- ldr x0, =GICD_BASE
- ldr x1, =GICC_BASE
+ bl get_gic_offset
bl gic_init_secure_percpu
#endif
#endif
* NOTE: As per the CCSR map doc, TZASC 3 and TZASC 4 are just
* placeholders.
*/
+#ifdef CONFIG_FSL_TZASC_1
ldr x1, =TZASC_GATE_KEEPER(0)
ldr w0, [x1] /* Filter 0 Gate Keeper Register */
orr w0, w0, #1 << 0 /* Set open_request for Filter 0 */
str w0, [x1]
- ldr x1, =TZASC_GATE_KEEPER(1)
- ldr w0, [x1] /* Filter 0 Gate Keeper Register */
- orr w0, w0, #1 << 0 /* Set open_request for Filter 0 */
- str w0, [x1]
-
ldr x1, =TZASC_REGION_ATTRIBUTES_0(0)
ldr w0, [x1] /* Region-0 Attributes Register */
orr w0, w0, #1 << 31 /* Set Sec global write en, Bit[31] */
orr w0, w0, #1 << 30 /* Set Sec global read en, Bit[30] */
str w0, [x1]
+ ldr x1, =TZASC_REGION_ID_ACCESS_0(0)
+ ldr w0, [x1] /* Region-0 Access Register */
+ mov w0, #0xFFFFFFFF /* Set nsaid_wr_en and nsaid_rd_en */
+ str w0, [x1]
+#endif
+#ifdef CONFIG_FSL_TZASC_2
+ ldr x1, =TZASC_GATE_KEEPER(1)
+ ldr w0, [x1] /* Filter 0 Gate Keeper Register */
+ orr w0, w0, #1 << 0 /* Set open_request for Filter 0 */
+ str w0, [x1]
+
ldr x1, =TZASC_REGION_ATTRIBUTES_0(1)
ldr w0, [x1] /* Region-1 Attributes Register */
orr w0, w0, #1 << 31 /* Set Sec global write en, Bit[31] */
orr w0, w0, #1 << 30 /* Set Sec global read en, Bit[30] */
str w0, [x1]
- ldr x1, =TZASC_REGION_ID_ACCESS_0(0)
- ldr w0, [x1] /* Region-0 Access Register */
- mov w0, #0xFFFFFFFF /* Set nsaid_wr_en and nsaid_rd_en */
- str w0, [x1]
-
ldr x1, =TZASC_REGION_ID_ACCESS_0(1)
ldr w0, [x1] /* Region-1 Attributes Register */
mov w0, #0xFFFFFFFF /* Set nsaid_wr_en and nsaid_rd_en */
str w0, [x1]
-
+#endif
isb
dsb sy
#endif
isb
#endif
+#if defined(CONFIG_FSL_LSCH2) && !defined(CONFIG_SPL_BUILD)
+ bl fsl_ocram_init
+#endif
+
mov lr, x29 /* Restore LR */
ret
ENDPROC(lowlevel_init)
+#if defined(CONFIG_FSL_LSCH2) && !defined(CONFIG_SPL_BUILD)
+ENTRY(fsl_ocram_init)
+ mov x28, lr /* Save LR */
+ bl fsl_clear_ocram
+ bl fsl_ocram_clear_ecc_err
+ mov lr, x28 /* Restore LR */
+ ret
+ENDPROC(fsl_ocram_init)
+
+ENTRY(fsl_clear_ocram)
+/* Clear OCRAM */
+ ldr x0, =CONFIG_SYS_FSL_OCRAM_BASE
+ ldr x1, =(CONFIG_SYS_FSL_OCRAM_BASE + CONFIG_SYS_FSL_OCRAM_SIZE)
+ mov x2, #0
+clear_loop:
+ str x2, [x0]
+ add x0, x0, #8
+ cmp x0, x1
+ b.lo clear_loop
+ ret
+ENDPROC(fsl_clear_ocram)
+
+ENTRY(fsl_ocram_clear_ecc_err)
+ /* OCRAM1/2 ECC status bit */
+ mov w1, #0x60
+ ldr x0, =DCSR_DCFG_SBEESR2
+ str w1, [x0]
+ ldr x0, =DCSR_DCFG_MBEESR2
+ str w1, [x0]
+ ret
+ENDPROC(fsl_ocram_init)
+#endif
+
#ifdef CONFIG_FSL_LSCH3
.globl get_svr
get_svr:
#if defined(CONFIG_GICV3)
gic_wait_for_interrupt_m x0
#elif defined(CONFIG_GICV2)
- ldr x0, =GICC_BASE
+ bl get_gic_offset
+ mov x0, x1
gic_wait_for_interrupt_m x0, w1
#endif
b.eq 1f
#ifdef CONFIG_ARMV8_SWITCH_TO_EL1
- adr x3, secondary_switch_to_el1
- ldr x4, =ES_TO_AARCH64
+ adr x4, secondary_switch_to_el1
+ ldr x5, =ES_TO_AARCH64
#else
- ldr x3, [x11]
- ldr x4, =ES_TO_AARCH32
+ ldr x4, [x11]
+ ldr x5, =ES_TO_AARCH32
#endif
bl secondary_switch_to_el2
1:
#ifdef CONFIG_ARMV8_SWITCH_TO_EL1
- adr x3, secondary_switch_to_el1
+ adr x4, secondary_switch_to_el1
#else
- ldr x3, [x11]
+ ldr x4, [x11]
#endif
- ldr x4, =ES_TO_AARCH64
+ ldr x5, =ES_TO_AARCH64
bl secondary_switch_to_el2
ENDPROC(secondary_boot_func)
ENTRY(secondary_switch_to_el2)
- switch_el x5, 1f, 0f, 0f
+ switch_el x6, 1f, 0f, 0f
0: ret
-1: armv8_switch_to_el2_m x3, x4, x5
+1: armv8_switch_to_el2_m x4, x5, x6
ENDPROC(secondary_switch_to_el2)
ENTRY(secondary_switch_to_el1)
/* physical address of this cpus spin table element */
add x11, x1, x0
- ldr x3, [x11]
+ ldr x4, [x11]
ldr x5, [x11, #24]
ldr x6, =IH_ARCH_DEFAULT
cmp x6, x5
b.eq 2f
- ldr x4, =ES_TO_AARCH32
+ ldr x5, =ES_TO_AARCH32
bl switch_to_el1
-2: ldr x4, =ES_TO_AARCH64
+2: ldr x5, =ES_TO_AARCH64
switch_to_el1:
- switch_el x5, 0f, 1f, 0f
+ switch_el x6, 0f, 1f, 0f
0: ret
-1: armv8_switch_to_el1_m x3, x4, x5
+1: armv8_switch_to_el1_m x4, x5, x6
ENDPROC(secondary_switch_to_el1)
/* Ensure that the literals used by the secondary boot code are
projects / oweals / u-boot.git / blobdiff