*/
#include <common.h>
+#include <efi_loader.h>
#include <libfdt.h>
#include <fdt_support.h>
#include <phy.h>
int addr_cells;
u64 val, core_id;
size_t *boot_code_size = &(__secondary_boot_code_size);
-#if defined(CONFIG_ARMV8_SEC_FIRMWARE_SUPPORT) && defined(CONFIG_ARMV8_PSCI)
+#if defined(CONFIG_ARMV8_SEC_FIRMWARE_SUPPORT) && \
+ defined(CONFIG_FSL_PPA_ARMV8_PSCI)
int node;
u32 psci_ver;
fdt_add_mem_rsv(blob, (uintptr_t)&secondary_boot_code,
*boot_code_size);
+#if defined(CONFIG_EFI_LOADER) && !defined(CONFIG_SPL_BUILD)
+ efi_add_memory_map((uintptr_t)&secondary_boot_code,
+ ALIGN(*boot_code_size, EFI_PAGE_SIZE) >> EFI_PAGE_SHIFT,
+ EFI_RESERVED_MEMORY_TYPE, false);
+#endif
+}
+#endif
+
+void fsl_fdt_disable_usb(void *blob)
+{
+ int off;
+ /*
+ * SYSCLK is used as a reference clock for USB. When the USB
+ * controller is used, SYSCLK must meet the additional requirement
+ * of 100 MHz.
+ */
+ if (CONFIG_SYS_CLK_FREQ != 100000000) {
+ off = fdt_node_offset_by_compatible(blob, -1, "snps,dwc3");
+ while (off != -FDT_ERR_NOTFOUND) {
+ fdt_status_disabled(blob, off);
+ off = fdt_node_offset_by_compatible(blob, off,
+ "snps,dwc3");
+ }
+ }
+}
+
+#ifdef CONFIG_HAS_FEATURE_GIC64K_ALIGN
+static void fdt_fixup_gic(void *blob)
+{
+ int offset, err;
+ u64 reg[8];
+ struct ccsr_gur __iomem *gur = (void *)(CONFIG_SYS_FSL_GUTS_ADDR);
+ unsigned int val;
+ struct ccsr_scfg __iomem *scfg = (void *)CONFIG_SYS_FSL_SCFG_ADDR;
+ int align_64k = 0;
+
+ val = gur_in32(&gur->svr);
+
+ if (SVR_SOC_VER(val) != SVR_LS1043A) {
+ align_64k = 1;
+ } else if (SVR_REV(val) != REV1_0) {
+ val = scfg_in32(&scfg->gic_align) & (0x01 << GIC_ADDR_BIT);
+ if (!val)
+ align_64k = 1;
+ }
+
+ offset = fdt_subnode_offset(blob, 0, "interrupt-controller@1400000");
+ if (offset < 0) {
+ printf("WARNING: fdt_subnode_offset can't find node %s: %s\n",
+ "interrupt-controller@1400000", fdt_strerror(offset));
+ return;
+ }
+
+ /* Fixup gic node align with 64K */
+ if (align_64k) {
+ reg[0] = cpu_to_fdt64(GICD_BASE_64K);
+ reg[1] = cpu_to_fdt64(GICD_SIZE_64K);
+ reg[2] = cpu_to_fdt64(GICC_BASE_64K);
+ reg[3] = cpu_to_fdt64(GICC_SIZE_64K);
+ reg[4] = cpu_to_fdt64(GICH_BASE_64K);
+ reg[5] = cpu_to_fdt64(GICH_SIZE_64K);
+ reg[6] = cpu_to_fdt64(GICV_BASE_64K);
+ reg[7] = cpu_to_fdt64(GICV_SIZE_64K);
+ } else {
+ /* Fixup gic node align with default */
+ reg[0] = cpu_to_fdt64(GICD_BASE);
+ reg[1] = cpu_to_fdt64(GICD_SIZE);
+ reg[2] = cpu_to_fdt64(GICC_BASE);
+ reg[3] = cpu_to_fdt64(GICC_SIZE);
+ reg[4] = cpu_to_fdt64(GICH_BASE);
+ reg[5] = cpu_to_fdt64(GICH_SIZE);
+ reg[6] = cpu_to_fdt64(GICV_BASE);
+ reg[7] = cpu_to_fdt64(GICV_SIZE);
+ }
+
+ err = fdt_setprop(blob, offset, "reg", reg, sizeof(reg));
+ if (err < 0) {
+ printf("WARNING: fdt_setprop can't set %s from node %s: %s\n",
+ "reg", "interrupt-controller@1400000",
+ fdt_strerror(err));
+ return;
+ }
+
+ return;
}
#endif
#ifdef CONFIG_SYS_DPAA_FMAN
fdt_fixup_fman_firmware(blob);
+#endif
+ fsl_fdt_disable_usb(blob);
+
+#ifdef CONFIG_HAS_FEATURE_GIC64K_ALIGN
+ fdt_fixup_gic(blob);
#endif
}