// SPDX-License-Identifier: GPL-2.0+
/*
- * Copyright 2017 NXP
+ * Copyright 2017-2019 NXP
* Copyright 2014-2015 Freescale Semiconductor, Inc.
*/
#include <common.h>
+#include <cpu_func.h>
+#include <env.h>
#include <fsl_ddr_sdram.h>
+#include <init.h>
+#include <hang.h>
+#include <vsprintf.h>
#include <asm/io.h>
#include <linux/errno.h>
#include <asm/system.h>
#include <fsl_qbman.h>
#ifdef CONFIG_TFABOOT
-#include <environment.h>
+#include <env_internal.h>
#ifdef CONFIG_CHAIN_OF_TRUST
#include <fsl_validate.h>
#endif
#endif
+#include <linux/mii.h>
DECLARE_GLOBAL_DATA_PTR;
CPU_TYPE_ENTRY(LS2081A, LS2081A, 8),
CPU_TYPE_ENTRY(LS2041A, LS2041A, 4),
CPU_TYPE_ENTRY(LS1043A, LS1043A, 4),
+ CPU_TYPE_ENTRY(LS1043A, LS1043A_P23, 4),
CPU_TYPE_ENTRY(LS1023A, LS1023A, 2),
+ CPU_TYPE_ENTRY(LS1023A, LS1023A_P23, 2),
CPU_TYPE_ENTRY(LS1046A, LS1046A, 4),
CPU_TYPE_ENTRY(LS1026A, LS1026A, 2),
CPU_TYPE_ENTRY(LS2040A, LS2040A, 4),
CPU_TYPE_ENTRY(LS1012A, LS1012A, 1),
+ CPU_TYPE_ENTRY(LS1017A, LS1017A, 1),
+ CPU_TYPE_ENTRY(LS1018A, LS1018A, 1),
+ CPU_TYPE_ENTRY(LS1027A, LS1027A, 2),
+ CPU_TYPE_ENTRY(LS1028A, LS1028A, 2),
CPU_TYPE_ENTRY(LS1088A, LS1088A, 8),
CPU_TYPE_ENTRY(LS1084A, LS1084A, 8),
CPU_TYPE_ENTRY(LS1048A, LS1048A, 4),
CPU_TYPE_ENTRY(LS1044A, LS1044A, 4),
+ CPU_TYPE_ENTRY(LX2160A, LX2160A, 16),
+ CPU_TYPE_ENTRY(LX2120A, LX2120A, 12),
+ CPU_TYPE_ENTRY(LX2080A, LX2080A, 8),
};
#define EARLY_PGTABLE_SIZE 0x5000
PTE_BLOCK_MEMTYPE(MT_DEVICE_NGNRNE) |
PTE_BLOCK_NON_SHARE | PTE_BLOCK_PXN | PTE_BLOCK_UXN
},
+#ifdef CONFIG_SYS_PCIE3_PHYS_ADDR
{ CONFIG_SYS_PCIE3_PHYS_ADDR, CONFIG_SYS_PCIE3_PHYS_ADDR,
CONFIG_SYS_PCIE3_PHYS_SIZE,
PTE_BLOCK_MEMTYPE(MT_DEVICE_NGNRNE) |
PTE_BLOCK_NON_SHARE | PTE_BLOCK_PXN | PTE_BLOCK_UXN
},
-#ifdef CONFIG_ARCH_LS2080A
+#endif
+#ifdef CONFIG_SYS_PCIE4_PHYS_ADDR
{ CONFIG_SYS_PCIE4_PHYS_ADDR, CONFIG_SYS_PCIE4_PHYS_ADDR,
CONFIG_SYS_PCIE4_PHYS_SIZE,
PTE_BLOCK_MEMTYPE(MT_DEVICE_NGNRNE) |
PTE_BLOCK_NON_SHARE | PTE_BLOCK_PXN | PTE_BLOCK_UXN
},
+#endif
+#ifdef SYS_PCIE5_PHYS_ADDR
+ { SYS_PCIE5_PHYS_ADDR, SYS_PCIE5_PHYS_ADDR,
+ SYS_PCIE5_PHYS_SIZE,
+ PTE_BLOCK_MEMTYPE(MT_DEVICE_NGNRNE) |
+ PTE_BLOCK_NON_SHARE | PTE_BLOCK_PXN | PTE_BLOCK_UXN
+ },
+#endif
+#ifdef SYS_PCIE6_PHYS_ADDR
+ { SYS_PCIE6_PHYS_ADDR, SYS_PCIE6_PHYS_ADDR,
+ SYS_PCIE6_PHYS_SIZE,
+ PTE_BLOCK_MEMTYPE(MT_DEVICE_NGNRNE) |
+ PTE_BLOCK_NON_SHARE | PTE_BLOCK_PXN | PTE_BLOCK_UXN
+ },
#endif
{ CONFIG_SYS_FSL_WRIOP1_BASE, CONFIG_SYS_FSL_WRIOP1_BASE,
CONFIG_SYS_FSL_WRIOP1_SIZE,
PTE_BLOCK_MEMTYPE(MT_DEVICE_NGNRNE) |
PTE_BLOCK_NON_SHARE | PTE_BLOCK_PXN | PTE_BLOCK_UXN
},
+#ifdef CONFIG_SYS_PCIE3_PHYS_ADDR
{ CONFIG_SYS_PCIE3_PHYS_ADDR, CONFIG_SYS_PCIE3_PHYS_ADDR,
CONFIG_SYS_PCIE3_PHYS_SIZE,
PTE_BLOCK_MEMTYPE(MT_DEVICE_NGNRNE) |
PTE_BLOCK_NON_SHARE | PTE_BLOCK_PXN | PTE_BLOCK_UXN
},
+#endif
{ CONFIG_SYS_FSL_DRAM_BASE3, CONFIG_SYS_FSL_DRAM_BASE3,
CONFIG_SYS_FSL_DRAM_SIZE3,
PTE_BLOCK_MEMTYPE(MT_NORMAL) |
for (i = 0; i < ARRAY_SIZE(cpu_type_list); i++)
if ((cpu_type_list[i].soc_ver & SVR_WO_E) == ver) {
strcpy(name, cpu_type_list[i].name);
+#ifdef CONFIG_ARCH_LX2160A
+ if (IS_C_PROCESSOR(svr))
+ strcat(name, "C");
+#endif
if (IS_E_PROCESSOR(svr))
strcat(name, "E");
strcpy(name, "unknown");
}
-#ifndef CONFIG_SYS_DCACHE_OFF
+#if !CONFIG_IS_ENABLED(SYS_DCACHE_OFF)
/*
* To start MMU before DDR is available, we create MMU table in SRAM.
* The base address of SRAM is CONFIG_SYS_FSL_OCRAM_BASE. We use three
final_map[i].virt = 0x2800000000ULL;
final_map[i].size = 0x800000000ULL;
break;
+#ifdef CONFIG_SYS_PCIE3_PHYS_ADDR
case CONFIG_SYS_PCIE3_PHYS_ADDR:
final_map[i].phys = 0x3000000000ULL;
final_map[i].virt = 0x3000000000ULL;
final_map[i].size = 0x800000000ULL;
break;
+#endif
+#ifdef CONFIG_SYS_PCIE4_PHYS_ADDR
case CONFIG_SYS_PCIE4_PHYS_ADDR:
final_map[i].phys = 0x3800000000ULL;
final_map[i].virt = 0x3800000000ULL;
final_map[i].size = 0x800000000ULL;
break;
+#endif
default:
break;
}
icache_enable();
dcache_enable();
}
-#endif /* CONFIG_SYS_DCACHE_OFF */
+#endif /* !CONFIG_IS_ENABLED(SYS_DCACHE_OFF) */
#ifdef CONFIG_TFABOOT
enum boot_src __get_boot_src(u32 porsr1)
break;
case RCW_SRC_EMMC_VAL:
/* RCW SRC EMMC */
- src = BOOT_SOURCE_SD_MMC2;
+ src = BOOT_SOURCE_SD_MMC;
break;
case RCW_SRC_I2C1_VAL:
/* RCW SRC I2C1 Extended */
if (prio)
return ENVL_UNKNOWN;
-#ifdef CONFIG_CHAIN_OF_TRUST
- /* Check Boot Mode
- * If Boot Mode is Secure, return ENVL_NOWHERE
- */
- if (fsl_check_boot_mode_secure() == 1)
- goto done;
+#ifdef CONFIG_ENV_IS_NOWHERE
+ return env_loc;
#endif
switch (src) {
break;
}
-#ifdef CONFIG_CHAIN_OF_TRUST
-done:
-#endif
return env_loc;
}
#endif /* CONFIG_TFABOOT */
if (env_get_f("hwconfig", buffer, sizeof(buffer)) > 0)
buf = buffer;
+ else
+ return;
prefetch_arg = hwconfig_subarg_f("core_prefetch", "disable",
&arglen, buf);
}
}
+#ifdef CONFIG_PCIE_ECAM_GENERIC
+__weak void set_ecam_icids(void)
+{
+}
+#endif
+
int arch_early_init_r(void)
{
#ifdef CONFIG_SYS_FSL_ERRATUM_A009635
printf("Did not wake secondary cores\n");
}
-#ifdef CONFIG_SYS_FSL_HAS_RGMII
- fsl_rgmii_init();
-#endif
-
config_core_prefetch();
#ifdef CONFIG_SYS_HAS_SERDES
fsl_serdes_init();
#endif
+#ifdef CONFIG_SYS_FSL_HAS_RGMII
+ /* some dpmacs in armv8a based freescale layerscape SOCs can be
+ * configured via both serdes(sgmii, xfi, xlaui etc) bits and via
+ * EC*_PMUX(rgmii) bits in RCW.
+ * e.g. dpmac 17 and 18 in LX2160A can be configured as SGMII from
+ * serdes bits and as RGMII via EC1_PMUX/EC2_PMUX bits
+ * Now if a dpmac is enabled by serdes bits then it takes precedence
+ * over EC*_PMUX bits. i.e. in LX2160A if we select serdes protocol
+ * that configures dpmac17 as SGMII and set the EC1_PMUX as RGMII,
+ * then the dpmac is SGMII and not RGMII.
+ *
+ * Therefore, move the fsl_rgmii_init after fsl_serdes_init. in
+ * fsl_rgmii_init function of SOC, we will check if the dpmac is enabled
+ * or not? if it is (fsl_serdes_init has already enabled the dpmac),
+ * then don't enable it.
+ */
+ fsl_rgmii_init();
+#endif
#ifdef CONFIG_FMAN_ENET
fman_enet_init();
#endif
#ifdef CONFIG_SYS_DPAA_QBMAN
setup_qbman_portals();
+#endif
+#ifdef CONFIG_PCIE_ECAM_GENERIC
+ set_ecam_icids();
#endif
return 0;
}
#ifdef CONFIG_FSL_LSCH3
u32 __iomem *cltbenr = (u32 *)CONFIG_SYS_FSL_PMU_CLTBENR;
#endif
-#if defined(CONFIG_ARCH_LS2080A) || defined(CONFIG_ARCH_LS1088A)
+#if defined(CONFIG_ARCH_LS2080A) || defined(CONFIG_ARCH_LS1088A) || \
+ defined(CONFIG_ARCH_LS1028A)
u32 __iomem *pctbenr = (u32 *)FSL_PMU_PCTBENR_OFFSET;
u32 svr_dev_id;
#endif
out_le32(cltbenr, 0xf);
#endif
-#if defined(CONFIG_ARCH_LS2080A) || defined(CONFIG_ARCH_LS1088A)
+#if defined(CONFIG_ARCH_LS2080A) || defined(CONFIG_ARCH_LS1088A) || \
+ defined(CONFIG_ARCH_LS1028A)
/*
* In certain Layerscape SoCs, the clock for each core's
* has an enable bit in the PMU Physical Core Time Base Enable
{
u32 val;
+#ifdef CONFIG_ARCH_LX2160A
+ val = in_le32(rstcr);
+ val |= 0x01;
+ out_le32(rstcr, val);
+#else
/* Raise RESET_REQ_B */
val = scfg_in32(rstcr);
val |= 0x02;
scfg_out32(rstcr, val);
+#endif
}
-#ifdef CONFIG_EFI_LOADER
+#if defined(CONFIG_EFI_LOADER) && !defined(CONFIG_PSCI_RESET)
void __efi_runtime EFIAPI efi_reset_system(
enum efi_reset_type reset_type,
return 0;
}
+
+#ifdef CONFIG_ARCH_MISC_INIT
+__weak int serdes_misc_init(void)
+{
+ return 0;
+}
+
+int arch_misc_init(void)
+{
+ serdes_misc_init();
+
+ return 0;
+}
+#endif
projects / oweals / u-boot.git / blobdiff