#include <asm-offsets.h>
#include <config.h>
-#include <version.h>
#include <asm/system.h>
#include <linux/linkage.h>
-.globl _start
-_start: b reset
- ldr pc, _undefined_instruction
- ldr pc, _software_interrupt
- ldr pc, _prefetch_abort
- ldr pc, _data_abort
- ldr pc, _not_used
- ldr pc, _irq
- ldr pc, _fiq
-#ifdef CONFIG_SPL_BUILD
-_undefined_instruction: .word _undefined_instruction
-_software_interrupt: .word _software_interrupt
-_prefetch_abort: .word _prefetch_abort
-_data_abort: .word _data_abort
-_not_used: .word _not_used
-_irq: .word _irq
-_fiq: .word _fiq
-_pad: .word 0x12345678 /* now 16*4=64 */
-#else
-_undefined_instruction: .word undefined_instruction
-_software_interrupt: .word software_interrupt
-_prefetch_abort: .word prefetch_abort
-_data_abort: .word data_abort
-_not_used: .word not_used
-_irq: .word irq
-_fiq: .word fiq
-_pad: .word 0x12345678 /* now 16*4=64 */
-#endif /* CONFIG_SPL_BUILD */
-
-.global _end_vect
-_end_vect:
-
- .balignl 16,0xdeadbeef
/*************************************************************************
*
* Startup Code (reset vector)
*
- * do important init only if we don't start from memory!
- * setup Memory and board specific bits prior to relocation.
- * relocate armboot to ram
- * setup stack
+ * Do important init only if we don't start from memory!
+ * Setup memory and board specific bits prior to relocation.
+ * Relocate armboot to ram. Setup stack.
*
*************************************************************************/
-.globl _TEXT_BASE
-_TEXT_BASE:
-#if defined(CONFIG_SPL_BUILD) && defined(CONFIG_SPL_TEXT_BASE)
- .word CONFIG_SPL_TEXT_BASE
-#else
- .word CONFIG_SYS_TEXT_BASE
-#endif
-
-/*
- * These are defined in the board-specific linker script.
- */
-.globl _bss_start_ofs
-_bss_start_ofs:
- .word __bss_start - _start
-
-.globl _bss_end_ofs
-_bss_end_ofs:
- .word __bss_end - _start
-
-.globl _end_ofs
-_end_ofs:
- .word _end - _start
-
-#ifdef CONFIG_USE_IRQ
-/* IRQ stack memory (calculated at run-time) */
-.globl IRQ_STACK_START
-IRQ_STACK_START:
- .word 0x0badc0de
-
-/* IRQ stack memory (calculated at run-time) */
-.globl FIQ_STACK_START
-FIQ_STACK_START:
- .word 0x0badc0de
-#endif
-
-/* IRQ stack memory (calculated at run-time) + 8 bytes */
-.globl IRQ_STACK_START_IN
-IRQ_STACK_START_IN:
- .word 0x0badc0de
-
-/*
- * the actual reset code
- */
+ .globl reset
+ .globl save_boot_params_ret
reset:
- bl save_boot_params
+ /* Allow the board to save important registers */
+ b save_boot_params
+save_boot_params_ret:
/*
* disable interrupts (FIQ and IRQ), also set the cpu to SVC32 mode,
* except if in HYP mode already
* Continue to use ROM code vector only in OMAP4 spl)
*/
#if !(defined(CONFIG_OMAP44XX) && defined(CONFIG_SPL_BUILD))
- /* Set V=0 in CP15 SCTRL register - for VBAR to point to vector */
- mrc p15, 0, r0, c1, c0, 0 @ Read CP15 SCTRL Register
+ /* Set V=0 in CP15 SCTLR register - for VBAR to point to vector */
+ mrc p15, 0, r0, c1, c0, 0 @ Read CP15 SCTLR Register
bic r0, #CR_V @ V = 0
- mcr p15, 0, r0, c1, c0, 0 @ Write CP15 SCTRL Register
+ mcr p15, 0, r0, c1, c0, 0 @ Write CP15 SCTLR Register
/* Set vector address in CP15 VBAR register */
ldr r0, =_start
mcr p15, 0, r0, c7, c10, 4 @ DSB
mcr p15, 0, r0, c7, c5, 4 @ ISB
#endif
-/*
- * Move vector table
- */
- /* Set vector address in CP15 VBAR register */
- ldr r0, =_start
- mcr p15, 0, r0, c12, c0, 0 @Set VBAR
bx lr
*
*************************************************************************/
ENTRY(save_boot_params)
- bx lr @ back to my caller
+ b save_boot_params_ret @ back to my caller
ENDPROC(save_boot_params)
.weak save_boot_params
mcr p15, 0, r0, c1, c0, 0 @ write system control register
#endif
-#ifdef CONFIG_ARM_ERRATA_742230
+#if (defined(CONFIG_ARM_ERRATA_742230) || defined(CONFIG_ARM_ERRATA_794072))
mrc p15, 0, r0, c15, c0, 1 @ read diagnostic register
orr r0, r0, #1 << 4 @ set bit #4
mcr p15, 0, r0, c15, c0, 1 @ write diagnostic register
orr r0, r0, #1 << 11 @ set bit #11
mcr p15, 0, r0, c15, c0, 1 @ write diagnostic register
#endif
+#ifdef CONFIG_ARM_ERRATA_761320
+ mrc p15, 0, r0, c15, c0, 1 @ read diagnostic register
+ orr r0, r0, #1 << 21 @ set bit #21
+ mcr p15, 0, r0, c15, c0, 1 @ write diagnostic register
+#endif
+
+ mov r5, lr @ Store my Caller
+ mrc p15, 0, r1, c0, c0, 0 @ r1 has Read Main ID Register (MIDR)
+ mov r3, r1, lsr #20 @ get variant field
+ and r3, r3, #0xf @ r3 has CPU variant
+ and r4, r1, #0xf @ r4 has CPU revision
+ mov r2, r3, lsl #4 @ shift variant field for combined value
+ orr r2, r4, r2 @ r2 has combined CPU variant + revision
+
+#ifdef CONFIG_ARM_ERRATA_798870
+ cmp r2, #0x30 @ Applies to lower than R3p0
+ bge skip_errata_798870 @ skip if not affected rev
+ cmp r2, #0x20 @ Applies to including and above R2p0
+ blt skip_errata_798870 @ skip if not affected rev
+
+ mrc p15, 1, r0, c15, c0, 0 @ read l2 aux ctrl reg
+ orr r0, r0, #1 << 7 @ Enable hazard-detect timeout
+ push {r1-r5} @ Save the cpu info registers
+ bl v7_arch_cp15_set_l2aux_ctrl
+ isb @ Recommended ISB after l2actlr update
+ pop {r1-r5} @ Restore the cpu info - fall through
+skip_errata_798870:
+#endif
+
+#ifdef CONFIG_ARM_ERRATA_801819
+ cmp r2, #0x24 @ Applies to lt including R2p4
+ bgt skip_errata_801819 @ skip if not affected rev
+ cmp r2, #0x20 @ Applies to including and above R2p0
+ blt skip_errata_801819 @ skip if not affected rev
+ mrc p15, 0, r0, c0, c0, 6 @ pick up REVIDR reg
+ and r0, r0, #1 << 3 @ check REVIDR[3]
+ cmp r0, #1 << 3
+ beq skip_errata_801819 @ skip erratum if REVIDR[3] is set
+
+ mrc p15, 0, r0, c1, c0, 1 @ read auxilary control register
+ orr r0, r0, #3 << 27 @ Disables streaming. All write-allocate
+ @ lines allocate in the L1 or L2 cache.
+ orr r0, r0, #3 << 25 @ Disables streaming. All write-allocate
+ @ lines allocate in the L1 cache.
+ push {r1-r5} @ Save the cpu info registers
+ bl v7_arch_cp15_set_acr
+ pop {r1-r5} @ Restore the cpu info - fall through
+skip_errata_801819:
+#endif
+
+#ifdef CONFIG_ARM_ERRATA_454179
+ cmp r2, #0x21 @ Only on < r2p1
+ bge skip_errata_454179
+
+ mrc p15, 0, r0, c1, c0, 1 @ Read ACR
+ orr r0, r0, #(0x3 << 6) @ Set DBSM(BIT7) and IBE(BIT6) bits
+ push {r1-r5} @ Save the cpu info registers
+ bl v7_arch_cp15_set_acr
+ pop {r1-r5} @ Restore the cpu info - fall through
+
+skip_errata_454179:
+#endif
- mov pc, lr @ back to my caller
+#ifdef CONFIG_ARM_ERRATA_430973
+ cmp r2, #0x21 @ Only on < r2p1
+ bge skip_errata_430973
+
+ mrc p15, 0, r0, c1, c0, 1 @ Read ACR
+ orr r0, r0, #(0x1 << 6) @ Set IBE bit
+ push {r1-r5} @ Save the cpu info registers
+ bl v7_arch_cp15_set_acr
+ pop {r1-r5} @ Restore the cpu info - fall through
+
+skip_errata_430973:
+#endif
+
+#ifdef CONFIG_ARM_ERRATA_621766
+ cmp r2, #0x21 @ Only on < r2p1
+ bge skip_errata_621766
+
+ mrc p15, 0, r0, c1, c0, 1 @ Read ACR
+ orr r0, r0, #(0x1 << 5) @ Set L1NEON bit
+ push {r1-r5} @ Save the cpu info registers
+ bl v7_arch_cp15_set_acr
+ pop {r1-r5} @ Restore the cpu info - fall through
+
+skip_errata_621766:
+#endif
+
+ mov pc, r5 @ back to my caller
ENDPROC(cpu_init_cp15)
#ifndef CONFIG_SKIP_LOWLEVEL_INIT
b lowlevel_init @ go setup pll,mux,memory
ENDPROC(cpu_init_crit)
#endif
-
-#ifndef CONFIG_SPL_BUILD
-/*
- *************************************************************************
- *
- * Interrupt handling
- *
- *************************************************************************
- */
-@
-@ IRQ stack frame.
-@
-#define S_FRAME_SIZE 72
-
-#define S_OLD_R0 68
-#define S_PSR 64
-#define S_PC 60
-#define S_LR 56
-#define S_SP 52
-
-#define S_IP 48
-#define S_FP 44
-#define S_R10 40
-#define S_R9 36
-#define S_R8 32
-#define S_R7 28
-#define S_R6 24
-#define S_R5 20
-#define S_R4 16
-#define S_R3 12
-#define S_R2 8
-#define S_R1 4
-#define S_R0 0
-
-#define MODE_SVC 0x13
-#define I_BIT 0x80
-
-/*
- * use bad_save_user_regs for abort/prefetch/undef/swi ...
- * use irq_save_user_regs / irq_restore_user_regs for IRQ/FIQ handling
- */
-
- .macro bad_save_user_regs
- sub sp, sp, #S_FRAME_SIZE @ carve out a frame on current
- @ user stack
- stmia sp, {r0 - r12} @ Save user registers (now in
- @ svc mode) r0-r12
- ldr r2, IRQ_STACK_START_IN @ set base 2 words into abort
- @ stack
- ldmia r2, {r2 - r3} @ get values for "aborted" pc
- @ and cpsr (into parm regs)
- add r0, sp, #S_FRAME_SIZE @ grab pointer to old stack
-
- add r5, sp, #S_SP
- mov r1, lr
- stmia r5, {r0 - r3} @ save sp_SVC, lr_SVC, pc, cpsr
- mov r0, sp @ save current stack into r0
- @ (param register)
- .endm
-
- .macro irq_save_user_regs
- sub sp, sp, #S_FRAME_SIZE
- stmia sp, {r0 - r12} @ Calling r0-r12
- add r8, sp, #S_PC @ !! R8 NEEDS to be saved !!
- @ a reserved stack spot would
- @ be good.
- stmdb r8, {sp, lr}^ @ Calling SP, LR
- str lr, [r8, #0] @ Save calling PC
- mrs r6, spsr
- str r6, [r8, #4] @ Save CPSR
- str r0, [r8, #8] @ Save OLD_R0
- mov r0, sp
- .endm
-
- .macro irq_restore_user_regs
- ldmia sp, {r0 - lr}^ @ Calling r0 - lr
- mov r0, r0
- ldr lr, [sp, #S_PC] @ Get PC
- add sp, sp, #S_FRAME_SIZE
- subs pc, lr, #4 @ return & move spsr_svc into
- @ cpsr
- .endm
-
- .macro get_bad_stack
- ldr r13, IRQ_STACK_START_IN @ setup our mode stack (enter
- @ in banked mode)
-
- str lr, [r13] @ save caller lr in position 0
- @ of saved stack
- mrs lr, spsr @ get the spsr
- str lr, [r13, #4] @ save spsr in position 1 of
- @ saved stack
-
- mov r13, #MODE_SVC @ prepare SVC-Mode
- @ msr spsr_c, r13
- msr spsr, r13 @ switch modes, make sure
- @ moves will execute
- mov lr, pc @ capture return pc
- movs pc, lr @ jump to next instruction &
- @ switch modes.
- .endm
-
- .macro get_bad_stack_swi
- sub r13, r13, #4 @ space on current stack for
- @ scratch reg.
- str r0, [r13] @ save R0's value.
- ldr r0, IRQ_STACK_START_IN @ get data regions start
- @ spots for abort stack
- str lr, [r0] @ save caller lr in position 0
- @ of saved stack
- mrs lr, spsr @ get the spsr
- str lr, [r0, #4] @ save spsr in position 1 of
- @ saved stack
- ldr lr, [r0] @ restore lr
- ldr r0, [r13] @ restore r0
- add r13, r13, #4 @ pop stack entry
- .endm
-
- .macro get_irq_stack @ setup IRQ stack
- ldr sp, IRQ_STACK_START
- .endm
-
- .macro get_fiq_stack @ setup FIQ stack
- ldr sp, FIQ_STACK_START
- .endm
-
-/*
- * exception handlers
- */
- .align 5
-undefined_instruction:
- get_bad_stack
- bad_save_user_regs
- bl do_undefined_instruction
-
- .align 5
-software_interrupt:
- get_bad_stack_swi
- bad_save_user_regs
- bl do_software_interrupt
-
- .align 5
-prefetch_abort:
- get_bad_stack
- bad_save_user_regs
- bl do_prefetch_abort
-
- .align 5
-data_abort:
- get_bad_stack
- bad_save_user_regs
- bl do_data_abort
-
- .align 5
-not_used:
- get_bad_stack
- bad_save_user_regs
- bl do_not_used
-
-#ifdef CONFIG_USE_IRQ
-
- .align 5
-irq:
- get_irq_stack
- irq_save_user_regs
- bl do_irq
- irq_restore_user_regs
-
- .align 5
-fiq:
- get_fiq_stack
- /* someone ought to write a more effective fiq_save_user_regs */
- irq_save_user_regs
- bl do_fiq
- irq_restore_user_regs
-
-#else
-
- .align 5
-irq:
- get_bad_stack
- bad_save_user_regs
- bl do_irq
-
- .align 5
-fiq:
- get_bad_stack
- bad_save_user_regs
- bl do_fiq
-
-#endif /* CONFIG_USE_IRQ */
-#endif /* CONFIG_SPL_BUILD */