bool
config MX6SX
+ select ROM_UNIFIED_SECTIONS
bool
config MX6UL
select SYS_L2CACHE_OFF
+ select ROM_UNIFIED_SECTIONS
bool
+config MX6ULL
+ bool
+ select MX6UL
+
+config MX6_DDRCAL
+ bool "Include dynamic DDR calibration routines"
+ depends on SPL
+ default n
+ help
+ Say "Y" if your board uses dynamic (per-boot) DDR calibration.
+ If unsure, say N.
+
choice
prompt "MX6 board select"
optional
+config TARGET_ADVANTECH_DMS_BA16
+ bool "Advantech dms-ba16"
+ select MX6Q
+
config TARGET_ARISTAINETOS
bool "aristainetos"
config TARGET_CGTQMX6EVAL
bool "cgtqmx6eval"
+ select SUPPORT_SPL
+ select DM
+ select DM_THERMAL
config TARGET_CM_FX6
bool "CM-FX6"
config TARGET_EMBESTMX6BOARDS
bool "embestmx6boards"
+config TARGET_GE_B450V3
+ bool "General Electric B450v3"
+ select MX6Q
+
+config TARGET_GE_B650V3
+ bool "General Electric B650v3"
+ select MX6Q
+
+config TARGET_GE_B850V3
+ bool "General Electric B850v3"
+ select MX6Q
+
config TARGET_GW_VENTANA
bool "gw_ventana"
select SUPPORT_SPL
config TARGET_MX6QARM2
bool "mx6qarm2"
+config TARGET_MX6Q_ICORE
+ bool "Support Engicam i.Core"
+ select MX6QDL
+ select OF_CONTROL
+ select DM
+ select DM_GPIO
+ select DM_MMC
+ select DM_THERMAL
+ select SUPPORT_SPL
+
config TARGET_MX6QSABREAUTO
bool "mx6qsabreauto"
select DM
config TARGET_MX6SXSABRESD
bool "mx6sxsabresd"
+ select MX6SX
select SUPPORT_SPL
select DM
select DM_THERMAL
+config TARGET_MX6SXSABREAUTO
+ bool "mx6sxsabreauto"
+ select MX6SX
+ select DM
+ select DM_THERMAL
+
config TARGET_MX6UL_9X9_EVK
bool "mx6ul_9x9_evk"
select MX6UL
select DM_THERMAL
select SUPPORT_SPL
+config TARGET_MX6ULL_14X14_EVK
+ bool "Support mx6ull_14x14_evk"
+ select MX6ULL
+ select DM
+ select DM_THERMAL
+
config TARGET_NITROGEN6X
bool "nitrogen6x"
bool "Bachmann OT1200"
select SUPPORT_SPL
+config TARGET_PICO_IMX6UL
+ bool "PICO-IMX6UL-EMMC"
+ select MX6UL
+
config TARGET_PLATINUM_PICON
bool "platinum-picon"
select SUPPORT_SPL
bool "platinum-titanium"
select SUPPORT_SPL
+config TARGET_PCM058
+ bool "Phytec PCM058 i.MX6 Quad"
+ select SUPPORT_SPL
+
config TARGET_SECOMX6
bool "secomx6 boards"
bool "udoo"
select SUPPORT_SPL
+config TARGET_UDOO_NEO
+ bool "UDOO Neo"
+ select SUPPORT_SPL
+
+config TARGET_SAMTEC_VINING_2000
+ bool "samtec VIN|ING 2000"
+ select MX6SX
+ select DM
+ select DM_THERMAL
+
config TARGET_WANDBOARD
bool "wandboard"
select SUPPORT_SPL
config TARGET_WARP
bool "WaRP"
+config TARGET_XPRESS
+ bool "CCV xPress"
+ select MX6UL
+ select DM
+ select DM_THERMAL
+ select SUPPORT_SPL
+
+config TARGET_ZC5202
+ bool "zc5202"
+ select SUPPORT_SPL
+ select DM
+ select DM_THERMAL
+
+config TARGET_ZC5601
+ bool "zc5601"
+ select SUPPORT_SPL
+ select DM
+ select DM_THERMAL
+
endchoice
config SYS_SOC
default "mx6"
+source "board/ge/bx50v3/Kconfig"
+source "board/advantech/dms-ba16/Kconfig"
source "board/aristainetos/Kconfig"
source "board/bachmann/ot1200/Kconfig"
source "board/barco/platinum/Kconfig"
source "board/barco/titanium/Kconfig"
source "board/boundary/nitrogen6x/Kconfig"
+source "board/ccv/xpress/Kconfig"
source "board/compulab/cm_fx6/Kconfig"
source "board/congatec/cgtqmx6eval/Kconfig"
+source "board/el/el6x/Kconfig"
source "board/embest/mx6boards/Kconfig"
+source "board/engicam/icorem6/Kconfig"
source "board/freescale/mx6qarm2/Kconfig"
source "board/freescale/mx6qsabreauto/Kconfig"
source "board/freescale/mx6sabresd/Kconfig"
source "board/freescale/mx6slevk/Kconfig"
source "board/freescale/mx6sxsabresd/Kconfig"
+source "board/freescale/mx6sxsabreauto/Kconfig"
source "board/freescale/mx6ul_14x14_evk/Kconfig"
+source "board/freescale/mx6ullevk/Kconfig"
+source "board/phytec/pcm058/Kconfig"
source "board/gateworks/gw_ventana/Kconfig"
source "board/kosagi/novena/Kconfig"
+source "board/samtec/vining_2000/Kconfig"
source "board/seco/Kconfig"
source "board/solidrun/mx6cuboxi/Kconfig"
+source "board/technexion/pico-imx6ul/Kconfig"
source "board/tbs/tbs2910/Kconfig"
source "board/tqc/tqma6/Kconfig"
source "board/udoo/Kconfig"
+source "board/udoo/neo/Kconfig"
source "board/wandboard/Kconfig"
source "board/warp/Kconfig"