ARM: mx28: Remove CONFIG_ARCH_CPU_INIT

[oweals/u-boot.git] / arch / arm / cpu / arm926ejs / at91 / at91sam9260_devices.c

diff --git a/arch/arm/cpu/arm926ejs/at91/at91sam9260_devices.c b/arch/arm/cpu/arm926ejs/at91/at91sam9260_devices.c
index f699f4d4898cd170ea23ec5dbefb00c79e8d30e6..62f76fa8e328441605d5e69a6ce10dcf2f5a4c6c 100644 (file)
--- a/arch/arm/cpu/arm926ejs/at91/at91sam9260_devices.c
+++ b/arch/arm/cpu/arm926ejs/at91/at91sam9260_devices.c
@@ -1,6 +1,6 @@
 /*
  * (C) Copyright 2007-2008
- * Stelian Pop <stelian.pop@leadtechdesign.com>
+ * Stelian Pop <stelian@popies.net>
  * Lead Tech Design <www.leadtechdesign.com>
  *
  * See file CREDITS for list of people who contributed to this
@@ -23,10 +23,10 @@
  */
 
 #include <common.h>
+#include <asm/io.h>
 #include <asm/arch/at91_common.h>
 #include <asm/arch/at91_pmc.h>
 #include <asm/arch/gpio.h>
-#include <asm/arch/io.h>
 
 /*
  * if CONFIG_AT91_GPIO_PULLUP ist set, keep pullups on on all
@@ -45,70 +45,51 @@
 
 void at91_serial0_hw_init(void)
 {
-       at91_pmc_t      *pmc    = (at91_pmc_t *) AT91_PMC_BASE;
+       at91_pmc_t      *pmc    = (at91_pmc_t *) ATMEL_BASE_PMC;
 
        at91_set_a_periph(AT91_PIO_PORTB, 4, 1);                /* TXD0 */
        at91_set_a_periph(AT91_PIO_PORTB, 5, PUP);              /* RXD0 */
-       writel(1 << AT91SAM9260_ID_US0, &pmc->pcer);
+       writel(1 << ATMEL_ID_USART0, &pmc->pcer);
 }
 
 void at91_serial1_hw_init(void)
 {
-       at91_pmc_t      *pmc    = (at91_pmc_t *) AT91_PMC_BASE;
+       at91_pmc_t      *pmc    = (at91_pmc_t *) ATMEL_BASE_PMC;
 
        at91_set_a_periph(AT91_PIO_PORTB, 6, 1);                /* TXD1 */
        at91_set_a_periph(AT91_PIO_PORTB, 7, PUP);              /* RXD1 */
-       writel(1 << AT91SAM9260_ID_US1, &pmc->pcer);
+       writel(1 << ATMEL_ID_USART1, &pmc->pcer);
 }
 
 void at91_serial2_hw_init(void)
 {
-       at91_pmc_t      *pmc    = (at91_pmc_t *) AT91_PMC_BASE;
+       at91_pmc_t      *pmc    = (at91_pmc_t *) ATMEL_BASE_PMC;
 
        at91_set_a_periph(AT91_PIO_PORTB, 8, 1);                /* TXD2 */
        at91_set_a_periph(AT91_PIO_PORTB, 9, PUP);              /* RXD2 */
-       writel(1 << AT91SAM9260_ID_US2, &pmc->pcer);
+       writel(1 << ATMEL_ID_USART2, &pmc->pcer);
 }
 
-void at91_serial3_hw_init(void)
+void at91_seriald_hw_init(void)
 {
-       at91_pmc_t      *pmc    = (at91_pmc_t *) AT91_PMC_BASE;
+       at91_pmc_t      *pmc    = (at91_pmc_t *) ATMEL_BASE_PMC;
 
        at91_set_a_periph(AT91_PIO_PORTB, 14, PUP);             /* DRXD */
        at91_set_a_periph(AT91_PIO_PORTB, 15, 1);               /* DTXD */
-       writel(1 << AT91_ID_SYS, &pmc->pcer);
-}
-
-void at91_serial_hw_init(void)
-{
-#ifdef CONFIG_USART0
-       at91_serial0_hw_init();
-#endif
-
-#ifdef CONFIG_USART1
-       at91_serial1_hw_init();
-#endif
-
-#ifdef CONFIG_USART2
-       at91_serial2_hw_init();
-#endif
-
-#ifdef CONFIG_USART3   /* DBGU */
-       at91_serial3_hw_init();
-#endif
+       writel(1 << ATMEL_ID_SYS, &pmc->pcer);
 }
 
 #if defined(CONFIG_HAS_DATAFLASH) || defined(CONFIG_ATMEL_SPI)
 void at91_spi0_hw_init(unsigned long cs_mask)
 {
-       at91_pmc_t      *pmc    = (at91_pmc_t *) AT91_PMC_BASE;
+       at91_pmc_t      *pmc    = (at91_pmc_t *) ATMEL_BASE_PMC;
 
        at91_set_a_periph(AT91_PIO_PORTA, 0, PUP);      /* SPI0_MISO */
        at91_set_a_periph(AT91_PIO_PORTA, 1, PUP);      /* SPI0_MOSI */
        at91_set_a_periph(AT91_PIO_PORTA, 2, PUP);      /* SPI0_SPCK */
 
        /* Enable clock */
-       writel(1 << AT91SAM9260_ID_SPI0, &pmc->pcer);
+       writel(1 << ATMEL_ID_SPI0, &pmc->pcer);
 
        if (cs_mask & (1 << 0)) {
                at91_set_a_periph(AT91_PIO_PORTA, 3, 1);
@@ -138,14 +119,14 @@ void at91_spi0_hw_init(unsigned long cs_mask)
 
 void at91_spi1_hw_init(unsigned long cs_mask)
 {
-       at91_pmc_t      *pmc    = (at91_pmc_t *) AT91_PMC_BASE;
+       at91_pmc_t      *pmc    = (at91_pmc_t *) ATMEL_BASE_PMC;
 
        at91_set_a_periph(AT91_PIO_PORTB, 0, PUP);      /* SPI1_MISO */
        at91_set_a_periph(AT91_PIO_PORTB, 1, PUP);      /* SPI1_MOSI */
        at91_set_a_periph(AT91_PIO_PORTB, 2, PUP);      /* SPI1_SPCK */
 
        /* Enable clock */
-       writel(1 << AT91SAM9260_ID_SPI1, &pmc->pcer);
+       writel(1 << ATMEL_ID_SPI1, &pmc->pcer);
 
        if (cs_mask & (1 << 0)) {
                at91_set_a_periph(AT91_PIO_PORTB, 3, 1);
@@ -157,7 +138,7 @@ void at91_spi1_hw_init(unsigned long cs_mask)
                at91_set_b_periph(AT91_PIO_PORTC, 4, 1);
        }
        if (cs_mask & (1 << 3)) {
-               at91_set_pio_output(AT91_PIO_PORTC, 3, 1);
+               at91_set_b_periph(AT91_PIO_PORTC, 3, 1);
        }
        if (cs_mask & (1 << 4)) {
                at91_set_pio_output(AT91_PIO_PORTB, 3, 1);
@@ -204,13 +185,18 @@ void at91_macb_hw_init(void)
 #else
        at91_set_b_periph(AT91_PIO_PORTA, 23, 0);       /* ETX2 */
        at91_set_b_periph(AT91_PIO_PORTA, 24, 0);       /* ETX3 */
+#if defined(CONFIG_AT91SAM9G20)
+       /* 9G20 BOOT ROM initializes those pins to multi-drive, undo that */
+       at91_set_pio_multi_drive(AT91_PIO_PORTA, 23, 0);
+       at91_set_pio_multi_drive(AT91_PIO_PORTA, 24, 0);
+#endif
 #endif
        at91_set_b_periph(AT91_PIO_PORTA, 22, 0);       /* ETXER */
 #endif
 }
 #endif
 
-#if defined(CONFIG_ATMEL_MCI) || defined(CONFIG_GENERIC_ATMEL_MCI)
+#if defined(CONFIG_GENERIC_ATMEL_MCI)
 void at91_mci_hw_init(void)
 {
        at91_set_a_periph(AT91_PIO_PORTA, 8, 1);        /* MCCK */