/*
* (C) Copyright 2007-2008
- * Stelian Pop <stelian.pop@leadtechdesign.com>
+ * Stelian Pop <stelian@popies.net>
* Lead Tech Design <www.leadtechdesign.com>
*
* See file CREDITS for list of people who contributed to this
*/
#include <common.h>
+#include <asm/io.h>
#include <asm/arch/at91_common.h>
#include <asm/arch/at91_pmc.h>
#include <asm/arch/gpio.h>
-#include <asm/arch/io.h>
/*
* if CONFIG_AT91_GPIO_PULLUP ist set, keep pullups on on all
void at91_serial0_hw_init(void)
{
- at91_pmc_t *pmc = (at91_pmc_t *) AT91_PMC_BASE;
+ at91_pmc_t *pmc = (at91_pmc_t *) ATMEL_BASE_PMC;
at91_set_a_periph(AT91_PIO_PORTB, 4, 1); /* TXD0 */
at91_set_a_periph(AT91_PIO_PORTB, 5, PUP); /* RXD0 */
- writel(1 << AT91SAM9260_ID_US0, &pmc->pcer);
+ writel(1 << ATMEL_ID_USART0, &pmc->pcer);
}
void at91_serial1_hw_init(void)
{
- at91_pmc_t *pmc = (at91_pmc_t *) AT91_PMC_BASE;
+ at91_pmc_t *pmc = (at91_pmc_t *) ATMEL_BASE_PMC;
at91_set_a_periph(AT91_PIO_PORTB, 6, 1); /* TXD1 */
at91_set_a_periph(AT91_PIO_PORTB, 7, PUP); /* RXD1 */
- writel(1 << AT91SAM9260_ID_US1, &pmc->pcer);
+ writel(1 << ATMEL_ID_USART1, &pmc->pcer);
}
void at91_serial2_hw_init(void)
{
- at91_pmc_t *pmc = (at91_pmc_t *) AT91_PMC_BASE;
+ at91_pmc_t *pmc = (at91_pmc_t *) ATMEL_BASE_PMC;
at91_set_a_periph(AT91_PIO_PORTB, 8, 1); /* TXD2 */
at91_set_a_periph(AT91_PIO_PORTB, 9, PUP); /* RXD2 */
- writel(1 << AT91SAM9260_ID_US2, &pmc->pcer);
+ writel(1 << ATMEL_ID_USART2, &pmc->pcer);
}
-void at91_serial3_hw_init(void)
+void at91_seriald_hw_init(void)
{
- at91_pmc_t *pmc = (at91_pmc_t *) AT91_PMC_BASE;
+ at91_pmc_t *pmc = (at91_pmc_t *) ATMEL_BASE_PMC;
at91_set_a_periph(AT91_PIO_PORTB, 14, PUP); /* DRXD */
at91_set_a_periph(AT91_PIO_PORTB, 15, 1); /* DTXD */
- writel(1 << AT91_ID_SYS, &pmc->pcer);
-}
-
-void at91_serial_hw_init(void)
-{
-#ifdef CONFIG_USART0
- at91_serial0_hw_init();
-#endif
-
-#ifdef CONFIG_USART1
- at91_serial1_hw_init();
-#endif
-
-#ifdef CONFIG_USART2
- at91_serial2_hw_init();
-#endif
-
-#ifdef CONFIG_USART3 /* DBGU */
- at91_serial3_hw_init();
-#endif
+ writel(1 << ATMEL_ID_SYS, &pmc->pcer);
}
#if defined(CONFIG_HAS_DATAFLASH) || defined(CONFIG_ATMEL_SPI)
void at91_spi0_hw_init(unsigned long cs_mask)
{
- at91_pmc_t *pmc = (at91_pmc_t *) AT91_PMC_BASE;
+ at91_pmc_t *pmc = (at91_pmc_t *) ATMEL_BASE_PMC;
at91_set_a_periph(AT91_PIO_PORTA, 0, PUP); /* SPI0_MISO */
at91_set_a_periph(AT91_PIO_PORTA, 1, PUP); /* SPI0_MOSI */
at91_set_a_periph(AT91_PIO_PORTA, 2, PUP); /* SPI0_SPCK */
/* Enable clock */
- writel(1 << AT91SAM9260_ID_SPI0, &pmc->pcer);
+ writel(1 << ATMEL_ID_SPI0, &pmc->pcer);
if (cs_mask & (1 << 0)) {
at91_set_a_periph(AT91_PIO_PORTA, 3, 1);
void at91_spi1_hw_init(unsigned long cs_mask)
{
- at91_pmc_t *pmc = (at91_pmc_t *) AT91_PMC_BASE;
+ at91_pmc_t *pmc = (at91_pmc_t *) ATMEL_BASE_PMC;
at91_set_a_periph(AT91_PIO_PORTB, 0, PUP); /* SPI1_MISO */
at91_set_a_periph(AT91_PIO_PORTB, 1, PUP); /* SPI1_MOSI */
at91_set_a_periph(AT91_PIO_PORTB, 2, PUP); /* SPI1_SPCK */
/* Enable clock */
- writel(1 << AT91SAM9260_ID_SPI1, &pmc->pcer);
+ writel(1 << ATMEL_ID_SPI1, &pmc->pcer);
if (cs_mask & (1 << 0)) {
at91_set_a_periph(AT91_PIO_PORTB, 3, 1);
at91_set_b_periph(AT91_PIO_PORTC, 4, 1);
}
if (cs_mask & (1 << 3)) {
- at91_set_pio_output(AT91_PIO_PORTC, 3, 1);
+ at91_set_b_periph(AT91_PIO_PORTC, 3, 1);
}
if (cs_mask & (1 << 4)) {
at91_set_pio_output(AT91_PIO_PORTB, 3, 1);
#else
at91_set_b_periph(AT91_PIO_PORTA, 23, 0); /* ETX2 */
at91_set_b_periph(AT91_PIO_PORTA, 24, 0); /* ETX3 */
+#if defined(CONFIG_AT91SAM9G20)
+ /* 9G20 BOOT ROM initializes those pins to multi-drive, undo that */
+ at91_set_pio_multi_drive(AT91_PIO_PORTA, 23, 0);
+ at91_set_pio_multi_drive(AT91_PIO_PORTA, 24, 0);
+#endif
#endif
at91_set_b_periph(AT91_PIO_PORTA, 22, 0); /* ETXER */
#endif
}
#endif
-#if defined(CONFIG_ATMEL_MCI) || defined(CONFIG_GENERIC_ATMEL_MCI)
+#if defined(CONFIG_GENERIC_ATMEL_MCI)
void at91_mci_hw_init(void)
{
at91_set_a_periph(AT91_PIO_PORTA, 8, 1); /* MCCK */
#endif
}
#endif
-